ADEPT TECHNOLOGY amplifiers

Voltage: 24 V
Current: 50 mA

Strain Gauge Measuring Amplifier DM222 for connecting strain gauge sensors and converting them into analog output signals. Special technical features of the DM222 (2 channel) Strain Gauge Measuring Amplifier ...

Voltage: 24 V
Current: 50 mA

Strain Gauge Measuring Amplifier DM221 for connecting one strain gauge sensor and converting into analog output signals. Special technical features of the DM221 (1 channel) Strain Gauge Measuring Amplifier ...

Voltage: 24 V
Current: 2.5, 5, 10 A

The intelligent AC-servo converter with integrated positioning control LV-servoTEC S2 FS enables extensive parameter setting possibilities for the flexible adaption to your application. The menu-driven parameter setting software S2 Commander ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA

External Amplifier IMA2 DMS External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for force sensors with strain gauge full bridge For direct connection of strain ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA

External Amplifier IMA2 R External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for linear and rotary potentiometers For direct connection of potentiometer (linear ...

Voltage: 0 V - 10 V
Current: 0 A - 20 A

External Amplifier IMA2 LVDT External amplifier with analogue output 0…5 V, 0…10 V, ±5 V, ±10 V, 0…20 mA, 4…20 mA for inductive displacement sensors For direct connection of inductive linear sensors Internal ...

Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz

Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...

Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz

Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...

Voltage: 12 V - 24 V
Frequency: 0 Hz - 400 Hz

Description: - On/Off sensor digital amplifier, 1 relay output Power supply: - 115 / 230 Vac ±10%, 50 - 60 Hz Insulation: - 4.500 Vac (power/input/output) Input: - 1-CH free contact, reed, NPN 2/3 wire @ 12/24 ...

Frequency: 2 MHz

... gauge bridge amplifier is a differential high speed front-end amplifier with high precision. Strain gauges can be connected to the measuring bridge in full bridges, half bridges or ¼ bridge construction. ...

Frequency: 0 Hz - 20,000,000 Hz

The EL-LNA-2 is a 2-channel amplifier manufactured by Elsys. It is designed for any 3rd party data acquisition system. The amplifier offers an option between two gain stages of x10 and x100, both with ...

Current: 1, 2 A
Power: 20 W
Frequency: 100 kHz - 22,000 kHz

... Bandwidth（-3dB）:100kHz~22MHz Rated output power: 20W P1dB output power:40W Power gain: 40dB ATA-1222A is an RF power amplifier. The rated output power is 20W, P1dB output power is 40W. The gain is numerically adjustable, ...

Voltage: 35, 70 V
Current: 2 A
Power: 70 W

ATA-1372A is an ideal single-channel wide band amplifier that can amplify the AC and DC signals.matching with the mainstream signal generator, realize perfect signal amplification. Input The input is BNC interface ...

Voltage: 200, 100 V
Current: 500 mA
Power: 50 W

ATA-2021B is a single-channel high voltage amplifier capable of amplifying AC/DC signals. Maximum output 200Vp-p (±100Vp) high voltage, the DC offset voltage can be adjusted in three ranges, and the maximum output can ...

Voltage: 24 V - 260 V
Current: 300 mA
Frequency: 50, 60 Hz

OPTOCOUPLED STATIC OUTPUTS • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. Each output is electrically insulated from each other, from power supply and from all the inputs. ...

Voltage: 24 V - 260 V
Current: 5 A
Frequency: 50, 60 Hz

RELAY OUTPUT • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. The relay outputs have changeover N.O. + N.C. contacts electrically insulated from each other, from power supply ...

Voltage: 24 V - 260 V
Current: 300 mA
Frequency: 50, 60 Hz

• OPTOCOUPLED STATIC OUTPUT • 1 Timed channel General Features: These units allow to amplify signals from NAMUR sensors or contacts. The delay time and hold time respect the input signal are adjustable through potentiometers on ...

Voltage: 120 V
Current: 32 A
Power: 450, 60 W

... digital-analog model simulation changes, the power amplifiers are one of the main roles in the simulation system which could work as a bridge between simulator and other equipment. PA460Bi amplifier ...

Voltage: 270 V
Power: 3,000 W
Frequency: 5 kHz

PAV3000 is one model among PONOVO’s PAV series four-quadrant power amplifier products. PAV Series Four-quadrant Simulation Power Amplifier based on linear power amplifier technology ...

Voltage: 270 V
Power: 5,000 W
Frequency: 5 kHz

... the digital simulation system such as RTDS/OPAL-RT, it gives accurate dynamic simulation waveform signal to the amplifiers. The amplifiers output the high and accurate power to the simulation equipment ...

Voltage: 110 mV - 220 mV
Power: 70 W
Frequency: 50 Hz - 60 Hz

SIP Amplifier IPMG-70P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...

Voltage: 110 mV - 220 mV
Current: 4 mA - 6 mA
Power: 0 W - 130 W

IP Amplifier IPMG-130P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...

Voltage: 110 mV - 220 mV
Current: 4 mA - 6 mA
Power: 0 W - 360 W

VoIP Power Amplifier IPMG-360P This remote VolP amplifier units is IP-based power amplifier. The units is connected to the central exchange unit via ethernet Copper CAT5 or CAT6 or fibercable. ...

Voltage: 0 V - 300 V
Current: 0 A - 10 A

Dual Trip Amplifiers 2002ALM The 2002ALM family of trip-amplifiers can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage types • Wide range of configurable inputs • Configurable ...

Voltage: 24, 110 V
Current: 300, 130 mA

Loop Powered Trip Amplifier Loop Powered Input 4-20mA N/O or N/C SSR Output Front Panel Setpoint Setting The 20ALM is an input loop powered trip amplifier, deriving its power from the input signal • ...

Voltage: 8 V - 32 V

SBS48M-CA-16 Intelligent Signal Adapter for Joysticks - High reliability, High performance - Convert multipath analog signals & digital signals to CAN signal - Support CAN-Open protocol - Center position、Keeping area、Output ...

The MN 921 is a one-channel measuring amplifier with a power supply unit for measurement microphones. Between the input and output a precision measuring amplifier with changeable amplification is ...

II2(1)G Ex eb mb ib [ia Ga] IIC T4 Gb II2(1) D Ex tb ib [ia Da] IIIC T130°C Db Universal Ex switching amplifier for installation in Zone 1 / 2 / 21 / 22 Two configurable switching points / relay outputs Ambient temperature ...

Switching amplifier with relay output Two configurable switching points Ambient temperature -40…+70 °C IP66 Parameters can be set on site; display Stainless steel / polymer compound material for maximum corrosion ...

Voltage: 0 kV - 20 kV
Current: 0 mA - 20 mA
Power: 400 W

... response and the high slew rate required for various loads, such as high capacitive or reactive loads. The amplifier is a non-inverting amplifier. FEATURES AND ADVANTAGES Four-quadrant output, used ...

Voltage: 0 kV - 10 kV
Current: 0 mA - 2 mA
Power: 20 W

... responses and the high conversion rates required for various loads, such as highly capacitive or reactive loads. The amplifier is an in-phase amplifier. FEATURES AND ADVANCE: Four quadrant output ...

Voltage: 0 kV - 5 kV
Current: 0 mA - 20 mA
Power: 100 W

... response and the high slew rate required for various loads, such as high capacitive or reactive loads. The amplifier is a non-inverting amplifier. FEATURES AND ADVANTAGES Four-quadrant output, ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA

EMGZ310.ComACT – Digital Tension Measuring Amplifier with Optional Operation via FMS-comACT App •Free FMS-ComACT app •3 key operation with LCD, simple procedures for offset and calibration. •Detachable terminal ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
Power: 3 W

... standardized current and power outputs •14 bit resolution, cycle time 1 ms The EMGZ310 is a compact, digital strain gauge amplifier. It is designed for applications that involve the measurement or control of web tension ...

Voltage: 0 V - 10 V

... Dual-Channel Amplifier for Profinet IO Features PROFINET IRT- or RT-Device Precise material tension over the entire measuring roller Communication cycle time ≥ 0.5 ms (IRT) Various installation ...

Voltage: -10 V - 10 V
Current: -2 mA - 2 mA

• Measuring ranges from ±2 to 2200000 pC • Frequency range: ≈0 … 200 kHz • LCD and rotary knob for operation and configuration • RS-232C interface Electrical properties Output signal type Voltage Input type Charge (Piezoelectric, ...

Voltage: 10, -10 V
Current: 0 mA - 1 mA
Frequency: 0 kHz - 10 kHz

• Measuring range 1: ±100000 pC, measuring range 2: ±10000 pC • Charge input: KIAG 10-32 neg. • output signal: ±10 V with up to 10 kHz bandwidth Metrological characteristics Linearity <±0.05 %FSO Electrical properties Output ...

Frequency: 0 kHz - 200 kHz

Electrical properties Output signal type Voltage Input type Charge (Piezoelectric, PE) Signal size Very small signals (1000000pC) Dynamical properties Time constant Short, Long Operation and installation Device usage Signal conditioning

Voltage: 24 V - 230 V

... standard signals - with wide-range power supply unit • for snapping onto top-hat rail (DIN EN 50022-35) The isolation amplifier DTVU20 is mainly used for the conversion of standard signals. Fields of application are ...

Voltage: 0 V - 5 V

A Range of 2 amplifiers dedicated to amplify the signals from PT100 and 1000 platinum probes. The APT amplifier is built in a very compact housing allowing an easy installation into any wiring loom (Racing, ...

Our AMPT 2L product is an in-line analogue strain gauge amplifier with offset and gain controlled by microcontroller. It makes work very simple as it allows for: - Gain and offset adjustment. - Initiation of a temperature ...

The XN5 strain gauge amplifier is a 4 channel output version of our popular XN4 strain gauge amplifier. With the XN5 strain gauge amplifier, it’s possible to use a single compact amplifier ...

Sound amplifier for telephone, suitable for loud environments. Plus points Robust siren: IP66 Power supply: Direct parallel connection to the telephone line Continuous operation Housing made of highly resistant, ...

Sound amplifier for telephone, suitable for loud environments. Plus points Robust siren: IP66 Power supply: Direct parallel connection to the telephone line Continuous operation Housing made of highly resistant, ...

Voltage: 230 V

Telephone optical amplifier, adapted to loud environments. Plus points Robust siren: IP66 Power supply: 230 Vac Continuous operation Highly resistant, self-extinguishing ABS casing Telephone plug adapter and ...

Voltage: 70, 100, 50 V
Power: 120 W
Frequency: 10, 10 kHz

Power amplifier (Booster), Rated power output: 120W, Tones control: 1. Bass tones: ±10dB (100Hz) 2. Treble tones: ±10dB (10kHz). Frequency response: 30÷20,000Hz (-3dB), Sensitivity: 1250mV, Constant voltage outputs: 50-70-100V, ...

Voltage: 50, 70, 100 V
Power: 240 W
Frequency: 100, 10 Hz

Power Amplifier (booster). Rated power output: 240W, Constant voltage outputs: 50-70-100V, Tones control: 1. Bass tones: ±10dB (100Hz) 2. Treble tones: ±10dB (10kHz), Sensitivity: 1250mV. Dimensions: 432x88x272 mm. Weight: 8,2 kg.

Voltage: 50, 100, 70 V
Power: 480 W
Frequency: 100 Hz

... circuit, thermal switch located inside the power transformer, resettable thermal switch placed in contact with the power amplifier dissipator, mains fuses), fan cooling with automatic speed control.

Voltage: 24, 110, 220 V
Current: 25 mA

These units are very versatile as they can be used with all NAMUR, NPN and PNP sensors, functioning with relay ON or OFF load with a timing function in both states. Furthermore they have a programmable time scale from 0,03 seconds ...

Voltage: 12, 110, 220 V
Current: 50 mA

These instruments are made up of a transformer an amplifier and a transistor, a rectifying circuit and one or two output relays with changeover contacts, respectively in the ALNC and ALN2 types. They are used to supply ...

Voltage: 12, 110 V
Current: 25 mA

These instruments are made up of a transformer an amplifier and a transistor, a rectifying circuit and one or two output relays with changeover contacts, respectively in the ALNC and ALN2 types. They are used to supply ...