Lincoln self-priming pumps

Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar

... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... thixotropic and dilatant as well as abrasive or adhesive media are conveyed. The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the ...

Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW

ZPD external gear dosing pump Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific to ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...

Pressure: 5 bar

Positioned in the center of the installation compared to the two lines it allows to improve the length of the facility. It can be used with a single exit, another exit is closed by a special flip. Key features: - Output : 2 cm³ per ...

Pressure: 10 bar
Fluid temperature: 0 °C - 70 °C
Weight: 2.5 kg

The “PRM” is a multi-point piston pump operated by a cam system and designed to feed several independent lines up to a maximum of 12 outlets. The pump has been designed for single-point lubrication ...

Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.44, 0.55, 0.18, 0.25, 0.37 kW

Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for base mount. ADVANTAGES - Economical through closed circuit - Environment friendly - Function ...

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

Pressure: 0 bar - 0.848 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 55, 50 l/min
Head: 6.9, 7.8 m
Power: 0.48 kW

The LSP pump is a single-phase portable self-priming residue drainage pump incorporating a submersible motor. The suction attachment, supplied as standard, makes the pump ...

Flow: 0 l/min - 2,000 l/min
Head: 0 m - 80 m
Power: 0.81 kW - 8.1 kW

Tsurumi engine pumps feature a heavy-duty, compact and easy-to-use design. Made with excellent materials, these engine pumps can withstand the harsh conditions of construction sites and ...

Flow: 0 m³/h - 240 m³/h
Head: 0 m - 300 m
Power: 0.37 kW - 15 kW

The TVM2-series is a vertical multistage centrifugal pump designed for handling freshwater. Since it is an in-line type, the pump occupies less installation space. The major wetted parts are made of 304 ...

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Flow: 1.3 m³/h - 102 m³/h
Pressure: 13.8, 10.3 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The durable Waukesha Clean-out-of-Place (COP) Positive Displacement "Can-Do Pump". Versatile in application, its reliability has made it the industry ...

Flow: 1.3 m³/h - 68.3 m³/h
Pressure: 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Specifically designed to pump "unpumpable" products, such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional ...

Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C

... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...

Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C

... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...

Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm

... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

... PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous fluids - Dosing ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...

Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 40 bar
Head: 0 m - 340 m

... range of multistage pumps includes a series of horizontal pumps, MCH, and a range of vertical pumps, MCV. The horizontal types can also be supplied in a self-priming ...

Flow: 800, 500 m³/h
Pressure: 10 bar
Head: 100 m

Self-priming centrifugal pump to EN 733 (DIN 24255), Vertical or Horizontal Standardized and modular design Self-priming Built-in vacuum ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 9 bar
Head: 0 m - 80 m

Self-priming centrifugal pumps Excellent self-priming ability No non-return valve required in the inlet Single unbalanced/balanced seals to EN 12756 ...

Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C

... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump designs ...

Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C

... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...

Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C

... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed ...

Flow: 50 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 150 °C

Simple and compact construction for non-abrasive liquids General Purpose Internal gear pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes ...

Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 1.5 m³/h - 6.5 m³/h
Power: 250 W
Fluid temperature: 110 °C

... extremely strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 9 m³/h - 18 m³/h
Power: 1,500 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 90 l/min - 440 l/min
Head: 0 m - 25.5 m
Power: 0.37 kW - 4 kW

... system an exceptional self-priming duration of 90 seconds for up to 4 m can be achieved. Additionally no valves are required for the repeated self-priming process. Enhanced durability ...

Flow: 90 l/min - 440 l/min
Pressure: 0.4, 0.28, 0.33 MPa
Head: 0 m - 24 m

Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation The SMX-F is a horizontal self-priming magnetic drive pump ...

Flow: 0.038 l/min
Pressure: 2 bar
Power: 5.6 W

... injection. The sealed drive unit and control unit assure the water-/dust-proof of IP65. *Note: This pump is not completely water resistant. Protect the pump with a cover when installing it out of doors.

Flow: 0.00001 l/min - 0.861 l/min

This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By ...

Flow: 0.004 l/min - 0.00415 l/min

This pump of the Hei-Flow Core series is particularly suitable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel ...

Flow: 0.00001 l/min - 0.00081 l/min

The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are ...

Pressure: 3,800 bar

... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...

Pressure: 3,800 bar

... product life The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation pads ...

Flow: 2 us gal/min - 15 us gal/min
Pressure: 0 psi - 150 psi
Fluid temperature: 0 °F - 240 °F

500 Sanitary Pumps offer low flows and high performance in a compact, cost-effective size. Made of food-grade 316 stainless steel to meet 3A sanitary standards, this versatile pump also features elastomers ...

Flow: 225 m³/h
Pressure: 24 bar
Fluid temperature: -10 °C - 100 °C

... operations. The new pumps feature a long-coupled, full-size base frame design that incorporates a drip tray in accordance with the API 676 Third edition. Supplied complete with a mechanical seal to API 682 Category ...

Flow: 5 l/h - 1,250 l/h
Pressure: 0 bar - 72 bar
Fluid temperature: 0 °C - 120 °C

... dosing pumps offering an efficient, reliable and low maintenance solution for applications where low flow, accurate dosing is required. The new Mono dosing pump provides a smooth pumping action with ...

Flow: 0 l/min - 440 l/min
Head: 0 m - 20 m
Power: 0.54 kW - 3.8 kW

... End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming ...

Flow: 0 l/min - 52 l/min
Head: 0 m - 16 m
Power: 0.14 kW - 0.63 kW

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements ...

Flow: 0 l/min - 45 l/min
Head: 0 m - 45 m
Power: 0.25 kW - 1.06 kW

Miniature Centrifugal Pumps series KC are suitable for pumping thin-bodied fluids. They operate according to the bypass duct principle, with self-priming function following initial ...

Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C

... revolution. A value that is stated in technical documentation as the nominal volume Vgn to identify the pump size. Gear pumps are in principle self-priming - extremely high viscosities ...

Flow: 486 l/min - 2,568 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -20 °C - 200 °C

Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also ...

Flow: 0 m³/h - 15.3 m³/h
Pressure: 0 bar - 16 bar

... hose pump for medium flow applications Following the highly successful, class leading Verderflex Dura 45 hose pump, Verderflex are proud to announce an expansion to the range, the Verderflex Dura ...

Flow: 0 l/h - 204 l/h
Pressure: 0 bar - 2 bar

Panel mounted tube pumps for OEM applicationsThe Verderflex OEM range of tube pumps are designed for panel mounting or incorporation into 3rd party machines that need an accurate, low maintenance dosing ...

Flow: 12, 20 l/h
Pressure: 1, 4 bar

The versatile VP2–HT automatic peristaltic dosing pump is designed to maintain the right levels of chemicals in pools or water treatment systems. It is the perfect fit for small and medium sized pools. ...