Honeywell's Model MA15 is an economical, amplified piezoelectric accelerometer designed to be used in various types of industrial test and automation environments; including laboratory testing, modal studies and test cells.
The constant current low output impedance output combined with the ability to drive high load capacitance allows long runs ...
Honeywell offers a complete selection with frequencies from DC to 6000Hz and full scale ranges of 5g to 2000g. Select units will ...
The HG1171 Series is a six degrees of freedom (6DF) inertial measurement unit (IMU) that senses rotation rate about the roll, pitch and yaw axes (X, Y and Z axes) and acceleration along the longitudinal, lateral and vertical axes (X, Y and Z axes). This product is designed for enhanced accuracy of tracking and monitoring of vehicle/platform (up/down, left/right, forward/backward) in a hard mounted ...
The time is ripe for a compact, easy to install, plug & play, real time monitoring system
FAG SmartCheck is a new, innovative measuring system for the permanent monitoring of machines. Its attractive price makes the monitoring of a wide range of systems ...
Type 4294 permits accurate adjustment of measuring instrumentation at a standard acceleration level of 10 ms–2 (0 – 70 g load). The reference signal may additionally be used for velocity and displacement calibration, at 10 mms–1 and 10 µm respectively.
Type ...
Type 4370 is a piezoelectric, DeltaShear®, Unigain® accelerometer with top connector. Type 4370 features 10 – 32 UNF receptacle for output connection and can be mounted on the object by means of a 10 – 32 UNF threaded steel stud.
Features
* General purpose
...
Type 4381 is a piezoelectric, DeltaShear®, Unigain® accelerometer with side connector. Type 4381 features 10 – 32 UNF receptacle for output connection and can be mounted on the object by means of a 10 – 32 UNF threaded steel stud.Features
* General purpose
...
Find iMEMS accelerometers and iSensor intelligent sensors that detect and measure acceleration, tilt, shock and vibration. Order evaluation boards ...
Complex machine systems use acceleration sensors for precise real-time monitoring of machine vibration. Acceleration sensors detect machine component ...
The MMA7361LC is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole ...
Freescale's Xtrinsic MMA16xxW and MMA16xxNWR2 inertial satellite sensors are positioned around the car for front ...
Freescale's Xtrinsic MMA26xxW and MMA26xxNWR2 inertial satellite sensors are positioned around the car for front ...
Vibration Switch is small, compact, and uses two easy set up dials that adjust the maximum RMS velocity ...
Vibration Transmitter continuously detects the vibration in a system and monitors for unusual operating conditions and potential ...
Characteristics
High impedance charge mode, wide measuring ...
Characteristics
IEPE Voltage mode, Unique PiezoStar sensing element, high temperature operation, Ultra-low temperature sensitivity, ...
Characteristics
High impedance, ceramic shear sensing element, wide frequency ...
Type VE with integrated evaluation electronics.
Cable unit with 5 m cable.
Communication via RS-485 interface, one alarm output.
Frequency-selective monitoring of rolling element bearings, unbalance, gears, cavitation.
Level monitoring, peak value and average value.
Decentralised networking of ...
Type VE with RS-485 communication interface.
Interference immune data transfer.
Transfer lengths up to 200 m.
Detects unbalance, rolling element bearing damage, alignment errors, meshing.
For optimum uptime of critical machines.
Networkable ...
Continuous vibration monitoring according to ISO 10816.
2-wire loop powered.
4...20 mA signal output.
True rms monitoring of the overall velocity.
Robust metal housing provides high protection ...
MAG 2000: This cost-efficient, resettable, reusable, and tamper-proof device monitors the handling of fragile goods and freight containers greater than 100 lbs. When an impact occurs, the device records the direction and angle of impact.
The MAG 2000 utilizes two highly sensitive ...
ShockWatch DropSpot® provides ...
SPMB250-A1 board is a ready-to-use wireless acceleration sensor based on an IEEE 802.15.4 compliant radio. It is designed to enable development of applications for remote motion monitoring in wireless sensor networks systems.
The board is based on the ZigBee® module SPZB250 which performs both the RF radio and controlling functions and the ...
The LIS331HH is an ultra low-power high performance high full-scale three axes linear accelerometer belonging to the "nano" family, with digital I2C/SPI serial interface standard output.
The device features ultra low-power operational ...
Features:
Electronics
User preset parameters:
- Digital output: NPN, PNP (free contact)
- Measuring range: 10, 30, 100 mm/s
User adjustable parameters (through 2 linear potentiometers and 2 test led):
- Alarm threshold: 0.1 - 100% of the full scale value
- Operating ...
Speed-controlled drives are subject to ever increasing demands regarding dynamics, smooth running and disturbance resistance. Vibrations must be reduced down to a minimum. Acceleration sensors based on the Ferraris principle analyze ...
GF1
Electrostatic capacitance detection sensor
GS1
Made possible ...
The MTI-2100 Fotonic Sensor is a high-resoulution fiber optic ...
Model 352C33
High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k ...
Model 333B
Modal array, ceramic shear ICP® accel, 100 mV/g, 2 to 1k Hz, 3-pin conn. mtg
Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490 m/s² pk)
Broadband Resolution: (1 to 10000 Hz) 0.00007 g rms (0.0007 m/s² rms)
Frequency ...
High temperature, Radiation Hardened ceramic shear, charge output accelerometer, 10 pC/g, 5kHz, 10-32 side conn.(-65° to +900°F), supplied ...
