- Industrial machines and equipment >
- Heat Exchanger and Refrigeration >
- Other heating and cooling equipment
Other heating and cooling equipment
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Power: 235 W - 800 W
PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.
Power: 8 W - 150 W
PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.
All DC inverter heat recovery series offers simultaneous cooling and heating operation in one system. All DC Inverter Scroll Compressor Technology Possibility to make simulatenously cooling and heating in same system Modular, compact ...
Bosch Industriekessel GmbH - Industrial Boilers
- For the prewarming of viscous fuels - Suitable for all Bosch boiler systems with oil burner and ring mains supply - Increased operating reliability - Can also be configured for liquid biofuels and special fuels on request Highly ...
Bosch Industriekessel GmbH - Industrial Boilers
- Blow-down, expansion and cooling module for cooling blow-down water to the permissible temperature - Fast and easy assembly, requires just a small number of connections before the Blow-down, expansion and cooling module can be used - ...
Bosch Industriekessel GmbH - Industrial Boilers
Power: 250 W - 8,000 W
Temperature: 350, 100 °C
Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around a tube as part of a thermal system. Watlow’s FLUENT heater is designed ...
Watlow Electric Manufacturing Company
Power: 0 W - 1,000 W
Temperature: 200 °C
Prevent Freezing and Condensation In Electrical and Mechanical Housings WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, ...
Watlow Electric Manufacturing Company
Power: 0 kW - 225 kW
Temperature: -29 °C - 650 °C
Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted to many non-pressurized air-heating systems. Duct ...
Watlow Electric Manufacturing Company
Model 3210 Vortex Tube EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Temperatures, flows and cooling power can all be adjusted to produce temperatures from ...
Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar
The industrial hot air device type 3000-E is the optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, for example in production machines. There are two versions of the air ...
Forsthoff
Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar
The Type 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air heater enables integration into expert production processes. The air ...
Forsthoff
Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar
The industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration into professional production processes despite its high hot air output. The air ...
Forsthoff
Through integration of the segmented disc valve technology, the desuperheater type 5090 is able to control steam pressure and temperature in the steam network easily. By using four injection nozzles and finely tuned water conditioning, ...
Pressure: 80 psi - 100 psi
Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F for numerous industrial spot cooling applications. With ...
ITW Air Management
Pressure: 80 psi
Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. ...
ITW Air Management
Pressure: 80 psi - 100 psi
The Frost Free Cold Air Gun eliminates the mess associated with condensation and frost arising from continuous use of a Cold Air Gun. A must–have for sensitive applications such as: Cutting, drilling or machining of paper products, ...
ITW Air Management
Power: 15 kW - 3,000 kW
Steam production: 20 kg/h - 4,500 kg/h
The GE is an electric steam generator conceived for small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Thanks to the experience accumulated over more than ...
ATTSU TERMICA S.L.
Power: 15 kW - 3,300 kW
Steam production: 15 kg/h - 15,000 kg/h
Pressure: 3.3 bar
The GE INOX is an electric steam generator conceived for very small or small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Built with stanless steel AISI-316L Thanks ...
ATTSU TERMICA S.L.
Power: 38 kW
Steam production: 50 kg/h
The VL boiler is a clean steam generator that is horizontal. This boiler made of stainless steel uses dirtly steam, superheated water or thermal fluid to produce high purity steam. Its main features are the following: This equipment ...
ATTSU TERMICA S.L.
The fire blankets are made of fire retardant glass fibre fabric and, together with portable fire extinguishers and hydrants, form an essential part of the fire-fighting equipment used in small domestic fires, as they suffocate flames ...
TEXPACK
Temperature limit: 650 °C - 1,050 °C
Biotex® blankets reinforced with glass threads are made using Biotex® cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Biotex® cloth is soft to the touch and resistant. ...
TEXPACK
Temperature limit: 650 °C - 1,050 °C
Ceramic blankets reinforced with glass threads are made using Ceramic cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Ceramic cloth is soft to the touch and resistant. ...
TEXPACK
In the field of biomaterials, mechanical test is needed to be performed in a temperature controlled fluid bath, to reflect the physiological conditions of the body. Stents made of Nitinol have to be tested in a temperature controlled ...
Power: 20 W - 40 W
Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures great convection resulting in excellent heat dissipation. A touch-safe plastic cover provides for low surface temperatures on ...
STEGO
Power: 10 W - 50 W
Temperature: -45 °C - 70 °C
Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus condensation harming the components. The design of the aluminium profile creates ...
STEGO
Power: 50 W - 150 W
Temperature: -45 °C - 70 °C
Compact loop heater for heating enclosures with electrical and electronic components. Its design ensures great convection resulting in excellent heat dissipation. Touch-safe plastic housing minimises surface temperatures to 80 °C. Also ...
STEGO
Band heaters are designed with micanite or ceramic insulation sheathed with brass or stainless steel plate. Ceramic band heaters are chracterised by the excellent insulation properties and the long-lasting period of operation. Band ...
Power: 100 W - 10,000 W
Heating / cooling units ZGH type are heaters used to plasticize plastics. The construction of the extruder is based on ceramic heating inserts equipped with brass / steel heat sinks, the whole is closed in a steel housing. A fan is mounted ...
Heat transfer systems use either thermal oil, water or water/glycol as the heat transfer fluid depending on the outflow temperature. They are electrically heated and produce a controlled liquid flow. Heating and cooling systems from the ...
Heat transfer systems use either thermal oil, water or water/glycol as the heat transfer fluid depending on the outflow temperature. They are electrically heated and produce a controlled liquid flow. Heating and cooling systems from the ...
Power: 650 kW
In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would ...
WATTCO
In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would ...
WATTCO
Circulation Heaters, also known as “in line heaters,” have uses in many applications. They can use steel, stainless steel, or titanium depending on the application. Lube oil and waste oil applications often use steel for circulation heaters. ...
WATTCO
These types of water heaters are designed and manufactured for preheating and maintaining a constant water temperature in water-cooled endothermic engines. They are in fact applied in series with their normal cooling circuit. An adjustable ...
System di Rosati S.r.l.
- Power supply = 230V 50/60Hz M. - Power consumption = 400W/700W/900W - Max temperature = 55°C - ED% duty = 100%
System di Rosati S.r.l.
- Power supply = 230V 50/60Hz M. - Power consumption = 1200W/3000W - Max temperature = 80°C (adjustable) - ED% duty = 100%
System di Rosati S.r.l.
Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar
Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)
Herz GmbH
Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C
The short one for direct installation! With mounting thread directly in the housing. Smallest installation height despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage ...
Herz GmbH
Power: 0 kW - 1 kW
Temperature: 600 °C
Different voltages, power and special versions, such as external activation via controller or SPS possible. Available on request!!! Special accessories on request!!! - 24 month warranty (except wear parts) Voltage [VAC] ...
Herz GmbH
The TC 200 Series of Heating Table is manufactured by Borel Switzerland, and is specifically designed for all industrial applications. This device is constructed with welded chassis and aluminum tray. It ca generate with a power supply ...
The TC 300 Series of Heating Table is manufactured by Borel Switzerland, and is specifically designed for all industrial applications. This device is constructed with welded chassis and aluminum tray. It ca generate with a power supply ...
Power: 15.5, 2 kW
Steam production: 2 kg/h - 20 kg/h
Empty weight: 19.6, 12.9 kg
The steam generator for steam showers, private and semi-professional steam baths. Optionally available with integrated spa control for simultaneous and independent control of steam bath and sauna. Compact construction form – reliable ...
Condair Group AG
Power: 3.8 kW - 60 kW
Steam production: 5 kg/h - 80 kg/h
Empty weight: 40, 66, 132 kg
Condair Omega Pro steam humidifiers are optimized for use with demineralized water and drinking water. The design features employed ensure outstanding reliability in use, precise control, and simple operation. The units are the result ...
Condair Group AG
Steam production: 422 kg/h - 6,584 kg/h
Empty weight: 13, 24, 30, 65 kg
Steam baths with hygienic steam The Sigma generates sterilized, hygienic, odour-free steam. Available with seven practical power levels and in two different sizes, the Condair Sigma produces between 4 and 65 kg of steam per hour. Durable ...
Condair Group AG
Temperature limit: 1,400 °C
ZIRCAR Refractory Composites, Inc. insulating blankets are non woven, inorganic, fiber-based products that contain no asbestos. They are engineered for use as thermal barrier materials in high temperature applications up to 1260°C ...
ZIRCAR Silica Blanket Type SB-2000 is a high temperature insulation blanket made of mechanically interlocked continuous filament amorphous silica fibers with useful properties to temperatures of 1100°C (2012°F). SB-2000 is a strong ...
Capacity: 1,000 m³
Product features and description Stainless Steel Storage Tanks – Stainless Steel Tanks are the preferred choice for commercial and residential applications. From the harshest industrial applications to the most secure storage of residential ...
Wenzhou Jinbang Light Ind Machinery Co., Ltd
Capacity: 1,200 m³
Pressure: 0.3 Pa
We have been focused on the research, development and production of extraction tank used in the industrial since 1997. Combined with the characteristics of German E&E extraction tank, we redesigned and developed a new generation of ...
Wenzhou Jinbang Light Ind Machinery Co., Ltd
Capacity: 100 l - 20,000 l
Pressure: 0.2 MPa - 0.3 MPa
Product features and description 1.Stainless steel mixing tank with agitator has heating and heat preservation functions, and is manufactured, tested and accepted according to the Technical Conditions of Steel Welding Containers. 2.Stainless ...
Wenzhou Jinbang Light Ind Machinery Co., Ltd
Productivity: 15 kg/h - 250 kg/h
Working temperature: 500 °C - 900 °C
PRECIOUS METAL RECOVERY INCINERATORS In the precious metal revaluation process, the FVDM brings a compact and adaptable answer to incinerate the non-valuable part of the waste. Thanks to its compact design and its temperature range ...
ATI Industries
Productivity: 10 kg/h - 120 kg/h
Working temperature: 900 °C - 1,100 °C
ATI Industries offers you waste incinerators with a destruction capacity ranging from 10 to 100 kg/h. These equipments are reliable solutions that allow the elimination of different types of waste having a variable Lower Calorific ...
ATI Industries
Productivity: 10 kg/h - 150 kg/h
Working temperature: 900 °C - 1,100 °C
Ati Industries proposes you a mobile incinerators range with a destruction capacity between 10 and 150kg/h. This mobile incinerator range is « ready to use » and stands out by its easy commissioning, using and maintenance. This mobile ...
ATI Industries
Steam production: 100 kg/h - 8,000 kg/h
Pressure: 28 bar
Heating coil and 3 Pass design Gas, Oil or Combination Low NOx Burner High efficiency and Fuel saving Quality material, workmanship and components High safety components Availability of integration of superheater and economizer TRD ...
BROX BOILER & BURNER COMPANY
Steam production: 100 kg/h - 8,000 kg/h
Pressure: 2 bar - 28 bar
Heating coil and 3 Pass design Gas, Oil or Combination Low NOx Burner High efficiency and Fuel saving Quality material, workmanship and components High safety components Availability of integration of superheater and economizer TRD ...
BROX BOILER & BURNER COMPANY
Power: 250 kW - 9,300 kW
Temperature: 300 °C
Double heating coil and 3 Pass design High efficient running and fuel saving High-quality material and components The system is unpressurized. The initial investment cost in comparison to steam boilers is low for use at high temperatures. It ...
BROX BOILER & BURNER COMPANY
Industrial Shell Tube Heat Exchanger Details of Heat Exchanger Series Max Pressure - 100 MPa Product Range - Max diameter - 6m Max weight - 300tons Max thickness - 400mm Materials - Carbon ...
Power: 20 kW - 80 kW
Temperature: 20 °C - 200 °C
DL-3 electric air heater comprises 7 components: electric warmer + insulating case + blower + clean air valve + waste heat recycler + dehumidifying fan + operating mechanism. It is specifically created for supporting rooms that are heated ...
Power: 5 kW
Temperature: 60 °C
The ZL-2 steam air heater comprises seven components: radiant fin tube of steel and aluminum + electrical steam valve + overflow valve + heat isolation box + ventilator + Fresh air valve + electrical control system. It is particularly ...
500°F / 260°C Continuous Exposure: Higher Intermittent Removable Insulation Blanket If wear and exposures are part of the problem, we can custom design Removable Insulation Blanket covers to handle the harshest conditions. Heat ...
Ningguo BST Thermal Products Co.,Ltd
Aluminized Woven Silica Textile Blanket same high performance as our Woven Silica Fabric. Suitable for use at 1800°F (982°C) and able to withstand short term exposure up to 3000°F (1650°C). Ideal for reflecting intense radiant heat, ...
Ningguo BST Thermal Products Co.,Ltd
BST-CNM carbonized felt insulation fire blanket is lightweight, flexible and is rated up to 1,800°F, protecting material and equipment near welding operations from spark and spatter damage. Excellent insulation for sandwiching ...
Ningguo BST Thermal Products Co.,Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining