|
|
Bending and Edging Machines -
Quality and Repeatability
For efficient production, high process safety and fully reproducible quality, our bending and edging machines have a proven track record with customers worldwide.
As is the case with any machine built by WEGENER, the bending machine excel with respect to durability, longevity, technological advantage, easy handling and excellent cost/performance ratio. Whether you require the bending of individual pieces or high yolume production, WEGENER offers a model suitable for any application. Two base models and a variety of options allow the tailoring of a machine to your specific needs.
Should your requirements be extraordinary, the modular design and construction permits adaptability to customized solutions.
|
|
The synchronization of press brake adopt the technology of full loop electro hydraulic servo control, the positioning signal of the upper beam are feed back by raster (light-ruler) to CNC system and CNC system will check the opening size of synchronizing valves, adjusting the inlet oil amount, to realize the synchronizing movements of the upper beam (Y1, Y2) and keep the worktable are always in parallel situation. Following the situation of sheet metal to be bended, CNC system control automatically the amount of the crowning compensation of worktable to realize that angle being bended of workpiece can keep same a long the full workpiece length.
PLEASE WRITE ALL ENQUIRIES ONLY IN ENGLISH!
|
|
As the specialist in press braking thin sheet metal, Safan offers the most sophisticated range of press-brakes, from the lightest-duty SAFAN E-Brake with a pressure force of 35 tons and a working length of 1.25 metres to the heaviest-duty SAFAN H-Brake with a pressure force of 480 tons and a 7.50-metre working length.
The revolutionary SAFAN E-Brake is the first servo-electronic press-brake in the world and was developed by Safan as an entirely new concept. A revolutionary feature is its servo-electronic drive system based on the pulley principle, which ensures a very even distribution of forces. This means that in 98% of cases no crowning table is required.
The servo-hydraulic SAFAN H-Brake stands out because of its fast hydraulics, robust construction - with independently mounted measuring frame for optimum accuracy - and its fast and accurate backgauge systems.
|
|
Ursviken OptiForm - the easy-operated, smart press brake
UMV has developed a new press brake with high productivity and exceptional technical performance at a competitive price. It is appreciated by customers who do not want to lower the standards of quality, accuracy or safety just because they want an easy to operate machine at a low price.
The OptiForm is a model which is simple to program and use and is well suited for customers who wish to upgrade from a manual to a CNC-controlled press brake.
OptiForm has control system Cybelec DNC 880, 2-axis back gauge, manual or CNC-controlled crowning, manual or CNC table brackets and manual or hydraulic clamping of upper tools.
The press table has slots in the table for single V tool with manual clamping. As safety equipment, choose between light curtain and Lazersafe
|
|
CAPACITY RANGE
Bending tonnage : from 350 to 10000 kN
Bending length : from 1250 mm to 6100 mm
Special size press brakes in capacities other than the standard are also
available in our production.
MAIN FEATURES
- Downstroke bending beam on two cylinders which are fully supported in low-friction slideways.
- Rigidly welded, monoblock steel frame for minimum deflection under load.
- Full electronic synchronisation with a proportional valve technology
- Maximum bend accuracy and repeatability assured through constant monitoring and correction of beam parallelism by a CNC system.
- Stroke-depth measurement through high precision linear scales
- CNC-controlled ballscrew backgauge systems with AC or DC drives
- Compactly-wired electrical cabinet with ventilation
- All-European hydraulics and electrical / electronic components.
|
|
|
|
|
|
AD-S SERIES
CNC Synchro Press Brakes
The S is available in up to eleven axis configurations. It is a machine truly designed to decrease setup time. The powerful yet simple control will automatically calculate the bend sequence, bend angle, back gauge retraction, bend allowance, and features collision protection. The ram positioning system allows real time monitoring and complete control of all ram speeds, positions, and dwell times. Imagine when handling large sheets, the operator can actually program the pressing speed down to a point where whip up and part dishing are virtually eliminated. Once the bend target has been reached, a short and slow speed return point can be programmed; giving the operator a better way of handling it after the bend is made. Programmable ram tilts, which are useful in conical or fadeout work, are also a feature of this machine. The automatic calibration and + - 0,01 mm positioning accuracy make S a great partner for the production of precision components, both large and small.
Standard Equipment
CNC Controlled Motorised Crowning
Numerical Control Cybelec ModEva 10S Windows with Software
or Delem DA-66W%u2022 Y1, Y2, X, R (4-Axis)
European Clamping system
Servo Motorized 2 axis Back gauge ( can be differ on big sizes)
Sliding sheet support Arms with T-Canal and Tilting stop
Note : E series CNC 3 axis Press Brakes is also in the product line of DURMA.
|
|
|
|
|
|
CNC and conventional hydraulic press brake
BuBend
BuBend has maximum precision in bending process. Because, BuBend series pres brakes are designed to solve the problems occured during sheet metal bending process.
High resistance body provides many abilities and also to work in small tolerances.
BuBend hydraulic pres brakes are completely equipped with customer prefrence and the basic principles are human safe and comfort.
Butek Machinery is designing and manufacturing special purpose metal working machines for international companies. Now, we represent the state of the art machine series BuBend hydraullic press brakes with years of experince in sheet metal forming technology.
uring manufacturing process all details are examined by technical staff according to usage conditions.
In CNC machines, high accuracy linear encoders are used to increase synchronization and user domination on the machine.
On the other hand, Butek Machinery improves own technology and manufacturing hydraulic cylinders itself.
Heat treated and hard chrome coated hydraulic cylinders are tested under overload and than assembled.
Angle measuring control unit is best solution to increase productivity. According to your request BuBend will equipped with angle measuring control unit.
The main problem in bending of sheet metal is different angles in middle and end sides.
|
|
G BEND
Standard equipment
- Stroke 250mm - Daylight 515mm.
- Industrial control Cybelec ModEva 10S with graphical simulation.
- Y1, Y2 independent hydraulic cylinders, proportional valve technology.
- Extra welded frame on the sides.
- Ram guidance with double roller bearings.
- Efficient, low noise, high speed, superior accuracy hydraulic system.
- 2 axis high speed back gauge system (500mm/s X) X+R with double
- linear quides.
- Standard CNC controlled anti deflection system.
- Standard heavy duty front gauges on linear guide.
- Mechanical upper tool clamping with fast tool change horizontalvertical loading & unloading.
- Mechanical lower tool clamping.
- Standard Laser safety Fiessler
- German origin, automatic height adjustment, CE certified.
- Wide selection of extra equipment.
|
|
The SAFAN E-Brake produces the most accurate and constant bending angles along the entire working length of the press-brake without the need for crowning. The unique, patented roller drive system in the upper beam ensures a uniform and direct distribution of forces. The servo-electronic drive with fast start and stop times allows for bending speeds of up to 20 mm/sec. The integration of this drive, combined with the SAFAN Touch Screen control panel and the safety light screen, cycle times are typically cut by 30%. In addition, the machine consumes up to 50% less energy.
Environmentally friendly technology without oil, low-noise operation and maximum ergonomics are the SAFAN E-Brake's other strengths. The machine comes with a unique, innovative backgauge system as a standard, which can be very accurately controlled and used on the entire working width.
|
|
EUROMAC bending machines are easy to operate and program, and the cost of production is surprisingly low. You can save any bending sequence to the machine's memory. No press brake should be without a complementary hydraulic bending machine from EUROMAC.
Available in 3 models:
DIGIBEND 160: pressure max. 16 ton, stroke max. 200 mm.
DIGIBEND 360 (with or without back-gauge): pressure max. 36 ton, stroke max. 250 mm.
DIGIBEND 720 (with or without back-gauge); pressure max. 72 ton, stroke max. 350 mm.
|
|
|
|
|
|
The horizontal bending presses have been specially designed for the execution of bends or shapes, single or multiple, for flat, square, round bars, tubes or various sections in iron, steel and light metals. They are indispensable in the carpenter's workshop where bending, straightening, punching works are carried out, as well as in factories where accurate production works are necessary.
The programming of digitally controlled models – DIGIT series - is functional and ensured via the electronic CLOCK2 type CN which, allows the operator to programme different work procedures without re-processing the piece.
CLOCK2 features:
- displaying on a high luminescence and resolution LCD screen of all working functions with 16x2 led characters
- touch-screen keyboard, complete with 35 keys,,16x2 led characters, full view of both axes "X" (axis stroke – punch) and "Y" (axis stroke side gauge positioner)
- memory of 550 programs in "X" axis and "Y" axis, each of the 2 axis has a program with 15 different lines – that can be repeated 999 times
- BENDING FUNCTION and TUB BENDING FUNCTION: programming in DEGREES of the bending angle directly from CN
- 5 language options
- measurement conversion millimetres / inches
- programs selector: manual, semi-automatic, automatic
- positioning accuracy: ± 0.1 mm
- stroke speed adjustment via flow adjustment valve automatic control from CN
- USB port for downloading programs on an external memory stick for saving and/or input data (optional)
|
|
|
|
|
|
HYDRAULIC HORIZONTAL BENDING PRESSES
The bending presses, which SIMASV was the first to manufacture in 1957, are particularly distinguished by their flexibility and versatility.
User-friendly and easy to maintain, the Simasv presses can be fitted with countless tools, making them suitable for use within any firm whether of a mechanical or other nature. Even in medium-sized industry they are a valid alternative when machinery for large-scale production must necessarily make way for machinery with distinctly lower production costs.
Over forty years' experience in the sector allows us to offer a competitive product in constant renewal.
TYPE OF BENDING PRESSES
SUPER SERIES
Versatile range of machines at a competitive price, with manual programming, designed to meet firstly the needs of the operator: they are equipped with a large work table to perform any kind of work:
T.22 Scanja
T.40 Super
T.70 Super
T.100 Super
DIGIT SERIES
Range of machines coming from the SUPER Series presses and equipped with a CN control type Clock2 and an automatic conventional cooling system of the hydraulic unit (COOL); the 2 AXIS models have an additional side axis for the processing:
T.40 DIGIT 1 AXIS
T.40 DIGIT 2 AXIS
T.70 DIGIT 1 AXIS
T.70 DIGIT 2 AXIS
T.100 DIGIT 1 AXIS
T.100 DIGIT 2 AXIS
MULTI SERIES
Range of machines coming from the SUPER Series presses and equipped with an additional bending machine for the curvature of profiles:
T.22 Chamaleon
T.40 Chamaleon
|
|
Innovative horizontal presses, technologically unique, electronically programmable.
Version H1 provides the facility to work on flat bar stock, sheetmetal, round bar stock and other materials. In addition to the processing capabilities of version H1, version H2 offers the facility for multiple tube-end operations including tapering, tube end deformation, flaring, and reduction.
Typical applications: ideal for all types of forming, bending, and punching. In addition, version H2 can be used for the construction of greenhouse frames, truck exhaust pipes, work in the hydraulic sector, 37° flanging and other tube-end deformation work.
|
|
|
|
|
|
Working with Laser Safety System installed SPEEDERMAK Hands and fingers are protected by continuously activated laser senses just under the punch area. If Laser Safe controller (LZS-003 or PCSS series! determines any obstacle, instantly stops the movement of punch and thus punch never touches to the obstacle. In comparison to working with conventional light barriers or double hand buttons. Laser Safe protection system gives the possibility of working more safety and high productivity by means of reacting both high sensitive and speedy. All used inputs and outputs suit to CE safety regulations as well. Maximum functionality is aimed with elevated standard hardware.
- High Speed. High Performance Press Brakes: The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control.
- With automatic indexing of the axes at the start of running process, calibration is provided.
- Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following:
- Determination of bending power required for each stroke.
- Graphical display of the unfolding of bending parts.
- Positioning of the back gauge for each step of the bending program,
- Determination of the most practical bending sequence
- Automatic calculation of top beam stroke for bending angle.
- Adaptation condition of tools and work pieces.
- Graphical display of potential interferences between material, tools and the machine.
|
|
|
|
|
|
We created the models in the Montbard range in cooperation with our customers. Driven by the desire to always be the best, we work with our customers to design our products. This opens new directions to us for study and optimisation. A wide range of options enables every customer to find the machine to suit his needs. Simple or fitted with hi-tech equipment, double sided or C-frame. Standard presses all share features such as:
. Exemplary quality.
. A competitive price resulting from series production.
. Elegant styling and a fine level of finishing.
. For the operator, efficient user-friendly controls.
. For maintenance, a maximum of data at the workstation and above all a quantity of details facilitating understanding.
Construction common to the whole of the standard range:
. Flame cut welded steel plate frame, stress-relieved by annealing before machining.
. Strength optimisation by finite element stress analysis.
. Hydraulic unit mounted on an oil retention tank with a drain plug at the operator's height.
. Standardised cylinder seals.
. Top-of-stroke safety lock.
. Outer finish by sound insulating panels.
. 6? black and white control screen.
. Conformity with EC standards in force.
For double action presses:
. A removable bolster.
. A bottom cushion that can be removed from the top.
|
|
As a pioneer in servo-hydraulic press-brakes, Safan still has an edge in this technology. With the new generation SAFAN H-Brake, Safan extends the evolution in sheet-metal working to pressure forces of 120 to 480 tons and working lengths of 3 to 7.5 metres.
The innovative machine construction contains a measuring device that is mounted independently of the side frames, for maximum precision. Other advantages are the fast, dependable hydraulics, highly dynamic servo valves, a large daylight opening, the variable beam opening (Q-size) and the fast, CNC operated backgauge system.
The SAFAN TS control panel allows every press-brake cycle to run swiftly and seamlessly. If required, it can be equipped with 2D and 3D programming. Another optional feature is a safety light screen with floating blanking function and 1 and 2 stroke work method.
|
|
Adira QHD press brakes, C type, present a remarkable step forward in relation to conventional press brakes.
The combination of two exclusive systems, resulting from simple ideas, allow for an excellent performance seen on the highly accurate bends and the better control of the bending angle:
CPS system in optimised combination with AF Wizard® allows for the teaching of the obtained angle by adjustment on the first bend.
As result of a thorough concept the precision and repeatability of the bending depth are excellent, independently of the bending length and temperature variation.
We recommend BL or LS versions equipped with protection by laser beams for increased productivity and maximum safety.
|
|
STANDARD FEATURES Steel welded frame
- Hydraulic system Bosch / Rexroth
- Electrical parts Siemens / Telemechanique
- Two hand control Start Button
- Emergency Stop Button
- Induction hardened and chrome plated column rods
- Two speed piston for moving plate at fast approach speed
- Automatic / Manual
OPTIONAL FEATURES
- Light curtain for safety
- Conformity to the EC Directives (CE)
- NC control
|
|
G FLEX
Standard equipment
- Stroke 250mm - Daylight 435 or 515mm.
- Industrial control Cybelec DNC 60.
- Y1, Y2 independent hydraulic cylinders, proportional valve technology.
- Extra welded frame on the sides.
- Ram guidance with double roller bearings.
- Efficient, low noise and accurate hydraulic system.
- Single axis back gauge system X.
- Mechanical upper tool clamping.
- Mechanical lower tool clamping.
- Standard Laser safety Fiessler German origin, manual height adjustment, CE certified.
- Wide selection of extra equipment.
|
|
Standard equipment
Industrial control Cybelec ModEva 10S with graphical simulation.
Y1, Y2 independent hydraulic cylinders, proportional valve technology.
Extra welded frame on the sides.
Ram guidance with heavy duty slides.
Efficient, low noise, high speed, superior accuracy hydraulic system.
Stroke & Daylight dependent upon the model and customer request.
2 axis heavy duty back gauge system X+R with double linear guides.
Standard manual anti deflection system.
Standard heavy duty front gauges on linear guide.
Heavy duty mechanical upper tool clamping system, Promecam- Amada adaptors on demand.
Heavy duty mechanical lower tool clamping.
Standard Laser safety Fiessler German origin CE certified.
Wide selection of tools and accessories.
|
|
Series WC67Y Hydraulic Press Brake
-Steel-welded construction,vibration to eliminate stress,with high strength and good rigidity.
- Hydraulic top-drive,steadiness and reliability.
- Mechanical stop,steel torsion bar to maintain synchronization,high precision.
- Motorized-adjusting device of backgauge and ram's stroke,fine adjusting by handwheel,numerical display.
- Deflection compensation unit installed on the top die.Manual crowned bottom die holder is adopted for the machine above 250 tons.
- Travel limit protection.Full machine guarding with safety interlocker.
-Pedestal mounted palm button station including emergency stop and up button.
-Any tailor-made are available on request.
|
|
|
Optima is our name for a series of large press brakes made for our customers highly specialized needs and specifications. With high precision and a complete range of automatic material handling components, Optima offers solutions for profitable manufacturing of large products.
|
|
|
|
|
|
The XXL-Center-Center is the world's first folding center for long parts. It automates the entire folding sequence for parts up to 4240 mm, 6400 mm or 8480 mm long and 1.5 mm thick. The machine automatically inserts, squares, positions to the bend line, and bends the flanges up or down. No more rotation. No more complicated handling. Enjoy the automatic production of precision parts, which will be produced in record time! In addition, the RAS XXL-Center folds pre-coated sheets without scratching the material surface.
After the machine has loaded and automatically squared the blank, the feeding grippers take it over, hold and position the part for each bend. The upper beam clamps the material. The two folding beams bend the part up or down. The free space created by this functionality provides part design capabilities never before seen on a metal folder.
The operator simply enters the angle and flange dimension for each bend in the graphical programming software. The CNC simulates the program sequence and allows a visual feasibility study.
|
|
|
|
|
|
Folding center for small parts
As a world premier RAS Reinhardt Maschinenbau GmbH presents the MiniBendCenter, an automated folding system for small and complex parts.
The MiniBendCenter demonstrated that folding is suited not only for classical applications like large size parts, but also offers distinguished services when it comes to small, complex components.
The MiniBendCenter addresses markets for small parts inside automats, cabinets, scales, white goods or medical components. The MiniBendCenter can handle blank sizes as small as 40 x 50 mm and workpieces up to 600 x 600 mm. It is designed for applications up to 3 mm mild steel.
All axes are servo motor and digital regulator driven. This allows automatic sequences with maximum accuracy and repeatability. Automatically means that blanks will be fed, squared and measured automatically. It also means that the machine will set up the tools automatically. A blank manipulator automatically moves the workpiece from one folding station to the other and rotated it to the correct position. As the machine has scanned the blank position in the manipulator once and the part manipulator does not release the blank during the production cycle the MiniBendCenter is able to fold the parts without positioning stops. The center folds flanges up and down and finally the part will be unloaded automatically.
A powerful programming system allow to create complex parts in less than 30 minutes. This comfort is based on a 3D CAM system, developed by RAS for the MiniBendCenter.
|
|
|
|
|
|
With its 2160 mm or 2560 mm working length on 2 mm mild steel and 203 mm box height capacity, the RAS folding center is a highlight in flexible sheet metal production. Highly dynamic servo-motors, an ultra fast tool changer, scratch free folding technology and flexible folding beam tools emphasize the RAS MULTIBEND-CENTER's pole position within folding technology.
Using an automated tool clamping system for the upper beam and folding beam, roto-foot corner tools, tab tools and the unique and patented UpDown tools, the MULTIBEND-CENTER folds parts with unmatched design flexibility and accuracy. This allows to produce workpieces with tapered shapes, folds inside the part or offset bends. Distinctive features which make customer parts more versatile and unique.
The MULTIBEND-CENTER is so sophisticated that it will allow to bend an in-credible mix of parts, from the most basic to the most complex. It can process parts in a complex kit production with the same ease as it would run a simple batch production. With its ability to manipulate blanks to 1/1000th degree around a complete 360 degree arc, rectangles and even tapered workpieces can be pro-duce with ease.
|
|
UpDownBend folds the part up and down and revolutionizes the entire folding sequence. There is no need any more for the operator to flip the part. This unique folding system reduces cycle times and eliminates the need for a second operator.
The new gauging system automatically adjusts its size to the current folding posi-tion. When parts are small or narrow the table surface area decreases. On large sheets this surface unfolds to its maximum dimension.
The system offers its maximum folding capacity of 4 mm (9 gauge) mild steel on 3200 mm (126") working length with segmented tools as tall as 204 mm (8"). Versatile upper beam tool segments, maximum 150 mm (5.92%) wide with side gripping pockets allow for an easy tool change.
The machine is complete with the revolutionary Touch & More control. The con-trol automatically creates a program, the finished part and the actual bend se-quence all with the touch of the control screen.
|
|
|
|
Press brakes
