|
|
Simasv beveling machines are heavy-duty, not too bulky, suit to bevel mild or stainless steel sheet. They allow to bevel different angles by adjusting the cutter unit.
Their particularly compact structure makes them easily transportable and suitable also to fasten large size pieces that must be beveled without the need to move them.
|
|
M657 - Milling cutter, straight-gash hob and whirling cutter sharpening machine
Resharpening form cutters and precision gear cutters Ø 25 - 120 mm, straight-gash hobs Ø 6 - 60 mm, and whirling cutters Ø 15 - 30 mm
Max. sharpening length 60 mm
Material: HSS and tungsten carbide
Workpiece positioning with laser
|
|
DEF Series
Double Tube Ends Chamfering for Long Lengths
Max. 7500mm working length. With Automatic Loading Magazine ( BTM )
The DEF Series Chamfering Machines (Long Lengths Type)
With the SOCO DEF series for long lengths, it is possible to simultaneously chamfer both ends of a tube, with up to 7500 mm in working length.
With an optional BTM (Bundle Magazine), the machines may offer a completely automatic loading, feeding and chamfering process. This range is suitable for cleanly and evenly chamfering both ends of the tube, as well as chamfering the inside, outside and face of the material.
(Pipe Benders - Tube Benders - Tube Bending - Pipe Bending - Bending Machine - Tube Bending Machine - Pipe Bending Machine - Circular Saw - Sawing Machine - Cutting Machine - Deburring - Tube End Finishing, Bender Tube, bender Pipe, Cutting, Chamfering Machines, Deburring Machines, CNC Tube and Bar Machining Center, HSS saw Blade )
|
|
The Pullmax bevelling machine functions basically the same way as roller shears, utilizing only one cutter. The shearing action actually feeds the work piece automatically through the machine. The method can be used for X, V, Y and K-form joints.
The degree of bevel angle is infinitely variable from 25° up to 55°. Motorized and adjusted by push-button control, a high degree of accuracy is achieved and is easily read on a graduated dial. The capacity of the machine covers up to 50 mm thick plate and 25 mm width of bevel in normal steel plate rated at 390 N/mm² tensile strength. The speed of bevelling is between 1,5 and 3,1 m/min., depending on the width and degree of angle for the bevel being produced. Since the bevel is achieved without heat, the cut surface is clean and unaffected by thermal stress. This makes the X97 suitable for certain grades of stainless steel as well as aluminum.
|
|
|
The XPS-16 is for shops that demand the ultimate in precision, simplicity and productivity. Only CNC can reproduce the complex, high-tech points found on today's premium HSS and carbide drills, and only the XPS-16 can to it all - with the touch of a button. Imagine, for the price of a couple hundred premium carbide drills, you can sharpen in house for only pennys a drill. This high capacity machine can sharpen thousands of drills a week.
|
|
AUTOMATIC DRILL RE-GRINDING MACHINE
The easy-to-operate RDG-13 can resharpen "R thinning" and "X Split" points with different point
angle (118 to 140 deg) and can resharpen "X" thinning points; with or without a gash.
Features
1. This machine can resharpen R thinning, X thinning with a gash or without a gash from 3mm to 13mm diameter, max 200mm OAL.
2. The special sensors enable the machine to adjust the tool to the proper grinding position, and then grind automatically.
3. Standard accessories include special collets for drill diameters 3, 4, 5 and 6 mm.
More information on this product (including dimensions and list prices) can be found by contacting OSG Europe or visiting http://www.osg.co.jp/eng/products/index.html for download the PDF.
|
|
|
|
|
|
PORTABLE DRILL RE-SHARPENER, VARIABLE ANGLES, FOR HSS AND HARD METAL. THREE MODELS: 2mm-13mm, 3mm-20mm, 12mm-30mm.
SAE 1300
Features:
Drill diameter: 2-13mm
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 10Kg
CBN grinding wheel for HSS: CBN-200
Diamond grinding wheel for Hard Metal: DIA-400-1300
Collets: ER-20
Dimensions: 30 x 20 x 1.8 cm
SERIES OF EQUIPMENT
Sharpening model SAE-1300
CBN grinding wheel for high speed steel.
Collets ER-20, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-1300 for hard metal.
SAE 2000
Features:
Drill diameter: 3-20mm
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 17Kg
CBN grinding wheel for HSS: CBN-200-2000
Diamond grinding wheel for Hard Metal: DIA-400-2000
Collets: ER-25
Dimensions: 40 x 22 x 20 cm
SERIAL EQUIPMENT
Sharpening model SAE-2000
CBN grinding wheel for high speed steel.
Collets ER-25: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 20.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-2000, for hard metal.
SAE 2500
Features:
Drill diameter: 12-26mm (optional 27, 28, 29, 30)
Variable angle: 90º -144º
Speed: 5300 rpm
Engine: AC 220V
Weight: 27Kg
CBN grinding wheel for HSS: CBN-140-2500
Diamond grinding wheel for Hard Metal: DIA-400-2500
Collets: ER-40
Dimensions: 45 x 24 x 22 cm
SERIAL EQUIPMENT
Sharpening model SAE-2500
CBN grinding wheel for high speed steel.
Collets ER-40: 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 and 26.
Allen wrench
OPTIONAL EQUIPMENT
Diamond wheel DIA-400-2500 for hard metal.
Collets ER-40: 27, 28, 29, 30.
|
|
|
Even very small shops can now sharpen their own drills, and keep on working. For the cost of less than 100 drills, you can accurately sharpen your most common drills in under a minute. The Darex V390 incorporates some of the same technology in our more advanced machines and is the perfect choice for shops that need a sharpener for intermittent use. Its simple, intuitive design give everyone access to sharp drills when you need them.
|
|
|
|
|
|
APOLLO 13
DIAMETER OF APPLIABLE END-MILLS:
4-13 FOR 2 FLUTED AND 6-13 FOR 4 FLUTED END-MILLS
APPLIABLE SHAFT DIAMETER OF END-MILLS:
4-6-8-10-12
AXIAL ANGLES:
1 PRIMARY CUTTING ANGLE 6º
2 RELIEVE ANGLE 20º
3 END GASH 30º
Whetstone grinding wheel:
CBN 170 FOR HSS (DIA 170 FOR CARBIDE)
VOLTAGE:
+ -10% 220V AC 50/60HZ
ENGINE POWER:
100W - 7200 RPM
DIMENSIONS: 220x2220x200
WEIGHT: 4.8 KG
EQUIPMENT:
5 HOLDER TUBES
RING SUPPORT FOR 2 AND 4 FLUTED END-MILLS
ALLEN WRENCH 3 mm
ALLEN WRENCH 2.5 mm
BRUSH
CABLE CONNECTION
APOLLO 22
DIAMETER OF APPLIABLE END-MILLS:
12-22
APPLIABLE SHAFT DIAMETER OF END-MILLS:
12-16-20
AXIAL ANGLES:
1 PRIMARY CUTTING ANGLE 6º
2 RELIEVE ANGLE 20º
3 END GASH 35º
Whetstone grinding wheel:
CBN 270 FOR HSS (DIA 270 FOR CARBIDE)
VOLTAGE:
220V AC 50/60HZ + - 10%
ENGINE POWER:
300W - 6900 RPM
DIMENSIONS: 300x300x280
WEIGHT: 12 KG
EQUIPMENT:
3 HOLDER TUBES
RING SUPPORT FOR 2 AND 4 FLUTED END-MILLS
ALLEN WRENCH 3 mm
ALLEN WRENCH 2.5 mm
BRUSH
CABLE CONNECTION
1 Fast (only 2 minutes) in implementation.
2 No need any professional knowledge, anyone can use it.
3 Machine favorite of the head. You can reuse the end-mills.
4 Saving, increase profits, increase effectiveness of the production.
5 Saves time, money, material and end-mills.
(APL-13 edges up to 1500 pieces with the same grinding wheel)
(APL-22 edges up to 1300 pieces with the same grinding wheel)
6 Increase the life time of the end-mill (wearing nothing more than 0.2 mm)
7 You can reuse the end-mill 8 to 9 times.
8 10 times more precise than hand-sharpening
9 Applicable to 2 and 4 fluted end-mills of HSS and carbide.
10 Simple, compact, portable and secure.
|
|
|
Quickly sharpen a wide range of end mills. Renew endmills up to 1" in diameter and 6" flute length. Easily sharpen long flute end mills. The easy-pull handle allows precise control of the air-bearing spindle. You can pull and rotate the spindle the full length of the end mill without the necessity of re-positioning your hand. Increase your production. A sharp end mill will allow maximum machining rates as well as generating less heat in the process. Fewer burrs will be created, reducing the time necessary for finishing processes.
|
|
High-precision CSP and BGA checker jig plate drilling
Application extended to brittle material in addition to resin
|
|
As a leading company in the PWB manufacturing systems industry, Hitachi Via Mechanics has been providing a broad range of products including PWB Mechanical Drilling Machines, Routing Machines and Laser Drilling Machines. We have also commercially introduced other products including Hole Analyzer and Printed-circuit Motherboard Products. Furthermore, we have been providing PWB manufacturing facilities, which are ready to address the needs of the highly-advanced information age. These solutions have an excellent reputation and have earned a high level of customer confidence.
LT Series
Laser trimming of embedded passive components on PWBs.
|
|
S11 speed
The specialist for any standard and special tools
- T-shaped design for easy one-side operation
- Motor-driven height adjustment
- Infinitely variable spindle drive from 2,000 to 12,000 rpm
- Schort work distance
- Axial infeed grinding spindle
- Measuring and checking on the machine: with the aid of a microscope, a projector or of ultra-modern video equipment
- Ideal for the maintenance of any standard and special tools such as step drills, rounding cutters, form drills and hobs
|
|
|
If you want the right point for the job, but don't want to become a tool and cutter grinding expert, the Darex XT3000 is for you. It sharpens a wide variety of sizes and styles of drills and other tools with ease and accuracy. Imagine, for the price of a couple hundred drills, you can sharpen in house for only pennies a drill. Using our patented chuck/cam design allows anyone to be a sharpening expert with a few minutes of instruction. A rock solid heavy duty machine capable of sharpening all day, everyday. Attachments can be interchanged in seconds and all adjustments can be made without tools.
|
|
Plate cold beveling machine GBC CHALLENGE suitable for beveling of large steel plates as well as small strips.
Completely automatic and 100% silenced, do not need any operator involvment (except control) during duty cycle.
Once positioned on plate the machine is self propelling, traveling along the plate edge automatically, carrying out the required bevel operation.
Engineered with varialble angle head it is capable of bevels from 22,5 deg. to 55 deg. without any additional optional equipment.
|
|
S0 and S0E
For single lip cutters and much more!
- Powerful drive
- Integrated wheel dressing unit
- Precise grinding spindle
- Versatile swivelling and setting options
- Optional: 1:20 microscope to drastically cut setting time
- Solid machine design for long-time precision
- Dust protection hood as standard feature for easy vacuum cleaner connection (integrated dust extraction for the S0E)
- Bench-type or floor-type version
- Great variety of accessories
|
|
|
|
|
|
FEATURES
LIFETIME Guarantee:
HFT offer a lifetime guarantee on the MOTOR of the TEG-3
Repeatable points every time:
The use of the 'TEG - 3 Tungsten Electrode Grinder' will give exactly the same tungsten points every time, enabling consistent repeatable arc performance and welding results.
Axial grinding:
By grinding the points longitudinally, the 'TEG - 3 Tungsten Electrode Grinder' eliminates arc flicker or wander.
Sizes:
Sizes from 1.6mm to 4mm can be ground as standard. Any other sizes can be catered for on request.
The TEG-3 Grinder is so powerful that it will grind tungsten electrodes up to 6 mm diameter, without stalling or burning out the motor. Remember, our lifetime guarantee and it has no limits. With the aid of a special collet accessory, short tungsten electrode lengths can be held, thus increasing the life of each electrode.
Low cost:
The TEG-3 Tungsten Electrode Grinder, has been designed and manufactured specifically for grinding Tungsten Welding Electrodes up to 6 mm diameter.
Prolonged tungsten life:
A tungsten electrode tip ground with the TEG-3 machine, will have a much greater life than a tip that has be hand ground on a workshop wheel or belt machine.
Arc Stability
Tungsten Electrode Tips ground with the TEG-3 Grinder, will be smooth and free from ridges, thus preventing erratic arc behaviour, arc flickering and arc instability.
|
|
| ... products without technical information |
| |
|
|
Sharpening machines
