|
|
CMA albedometers are suitable for measuring global radiation and/or albedo over many differing types of surface. The upper pyranometer measure incoming global solar radiation and the lower sensor measures solar radiation reflected from the surface below.
|
|
|
|
|
|
Optical metrology equipment for climatologists and meteorologists
The laser ceilometer from JENOPTIK Laser, Optik, Systeme GmbH measures such atmospheric parameters as cloud height, visibility and the height of a planetary boundary layer. The product provides the first ever metrological device to safely detect also cloud layers and cirrus clouds at height levels up to 15 kilometers. This marks a major progress in the science of meteorological and climatologic forecasting. Measurement is accomplished with an opto-electronic laser sensor that relies on the LIDAR principle, an optical version of radar: A solid-state laser emits light pulses into the atmosphere. The light which is scattered by air and aerosol molecules is collected with a specific optical setup to be detected by a highly sensitive photo receiver (APD). By analyzing the pulse transit time and the intensity of backscattered light portions, smart algorithms compute a high-resolution aerosol height profile along with other related measurement readings. With integrated heating and cooling functionality and designed for autonomous operation, the CHM 15k can be relied to perform in any weather conditions.
|
|
|
|
|
|
The characteristics of STL's Digital Magnetometers are very low noise, large dynamic range and high linearity. STL's Digital Magnetometer Series are combining STL's unique 26- Bit high resolution low noise data acquisition system, state of the art low noise fluxgate sensors and STL's data acquisition software. The digitalisation is located close to the Fluxgate sensor. These provide complete and miniaturized three- axis high end magnetic field measurement systems using any notebook having a PCMCIA Type II PC card slot. For complex multi channel measurement systems an Ethernet connectivity is available. The DM series covers a range from 80 uT to 1 mT. The max . Bandwidth is 4 KHz.
Digital temperature compensation minimizes drifts.
Sensor output is digitally error- corrected with respect to scaling, offset and alignment. A single coax cable power and data communication introduces minimal magnetic signature. The small size and lightweight system is ready to use.
++++ STL is looking wordwide for Dealers for the DM Series +++
|
|
EARTH RESISTIVITY METER PASI 16 GL
This new 16 bits instrument represents a large step forward in the field of electrical resistivity measurement at medium and great depth, for fresh water research and envinronmental monitoring.
Reliable and portable, the 16GL system is characterized by really first-rate performances at extremely low cost. The possibility to download data through the RS-232 port enables a quick interpretation with the VES 2000 interpretation software. It is recommended, as to exploit its capabilities, with the rechargeable accumulator P-100.
|
|
|
|
|
|
Your electric motors should not suffer from unexpected bearing failures
At SKF we believe in predictive maintenance; determining the condition of machinery while in operation and planning repairs of problem components prior to failure.
If you have ever experienced unexpected bearing failures in your electric motors then you are familiar with the associated negative impacts; unplanned downtime, lost production, repair costs, extra manpower costs and more.
What if there was an easy and quick way to detect a potential threat of bearing failure ahead of time?
We have an answer:
The new SKF Electrical Discharge Detector Pen can help you detect if your electric motor bearings are vulnerable to suffer from electrical erosion and eventual failure.
What is electrical erosion and how does it cause bearing failure?
In electric motors that are controlled by Variable Frequency Drives (VFD), the VFD induces electrical currents that may increase until they find discharge paths to earth via the motor frame. The electric currents pass through the bearing and when the voltage reaches a level to overcome the lubricant film layer in the bearing, electrical discharge occurs. Over time this can cause electrical erosion. Electrical erosion can cause bearings to fail very prematurely causing motor failure and unplanned downtime.
What is the SKF Electrical Discharge Detector Pen?
The SKF Electrical Discharge Detector Pen (EDD Pen) is a new innovative instrument. It is a simple to use, handheld instrument for detecting electrical discharges in electric motor bearings remotely. With the help of the EDD Pen you can detect whether electrical discharge is occurring in the bearing or not. This can help you easily identify bearings that are more susceptible to failure and plan necessary actions ahead of time.
|
|
ELECTRICAL IMAGING SYSTEM PASI 16G-N
The design philosophy adopted for this system is definitely innovative compared with the other systems available on the market. We are above all aiming to take advantage of the high calculating capacities that characterize the computer on board in order to make it possible for the operator to fully manage the automatic acquisition through a powerful and immediate user interface.
The basic system configuration consists of: a data acquisition unit, an energizer, a Link-box device for the management of the electrodes, 32 or more electrodes and connection cable/s (standard electrode spacing or as to user specifications).
One of the main 16G-N characteristic is its extreme modularity. Every instrument may not only be updated as the User requirements increase (going over from 32 to 256 electrodes), but it may even be implemented with the 16S-N seismograph (see the section concerning the combined 16SG-N system for further details from our website
|
|
The frying oil sensor CapSens5000 allows you to determine the quality of the frying oil reliably and precisely. Based on the dielectric constant, the polar compounds in the oil are measured. This method is well established and officially accepted as a screening method. By using the CapSens5000 instrument, you can change the oil at the right moment, saving procurement costs and ensuring best quality for your products.
CapSens5000 is equipped with state-of-the-art electronics and allows the data-transfer to a PC.
|
|
|
|
|
|
FERITSCOPE FMP30 – Ferrite content measurement in austenitic steel
The rugged FERITSCOPE® FMP30 with plug-in type smart probe is suited for fast, non-destructive and accurate measurement of ferrite content on-site or in the lab according to the magnetic inductive method.
The measurement range is from 0.1 to 80 % Fe or from 0.1 to 110 FN. The measurement options are either measurable in Ferrit-percentage “%Fe” or in Ferrit numbers “FN”.
Applications are all measurements of the ferrite content in
• austenitic steel welds e.g. of tubing etc.
• normal construction steel with austenitic chrome alloy steel welded cladding e.g., in boilers, vessels, etc.
• duplex steel.
This easy-to-use instrument has an USB interface for a PC and printer connection. It offers memory for up to 20.000 measurements with up to 100 applications. Further a detailed statistical and graphical evaluation is possible.
The calibration of the FERITSCOPE® FMP30 is traceable to internationally approved IIW secondary calibration standards. The instrument therefore meets all requirements of ANSI/AWS A4.2 and DIN EN ISO 8249 as well as of the "Basler" standard.
|
|
|
|
|
|
Electronic Fluxmeter EF 5
The Electronic Fluxmeter EF 5 is designed to measure the magnetic flux using measuring coils. It comprises a precision electronic DC integrator of high sensitivity and extremely low drift.
Key features:
Microprocessor controlled, easy operation
Automatic drift correction
Unique continuously working integrator: measuring range limits must not be observed
Self-adjustment by built-in voltage-time reference
Complete menu control, the most important functions can directly be accessed by function keys
Memories to store parameters of self-made coils (measuring coil constants, resistances etc.)
Convenient input of coil data and limits via the numeric keypad
Automatic calculation of measuring results taking into account the coil parameters
Directly reading in Volt-Seconds, Weber, Tesla, Gauss or other units
Automatic coil recognition and instrument configuration for measuring coils with data memories
4 limit comparators with relay outputs for process control
Modern, compact design
Directly installable to 19" racks
|
|
|
|
|
|
PDA-based magnetometer
A new magnetometer was presented by Narda Safety Test Solutions at Arbeitsschutz aktuell 2008. The THM1176-PDA device, which consists of a high-performance PDA and a precision, non-directional probe connected via USB, can be used as a stand-alone hand-held unit or in conjunction with a PC. It measures magnetic fields having flux densities of up to 20 Tesla in the frequency range from 0 Hz to 1 kHz.
The THM1176-PDA can be used anywhere where high magnetic field strengths need to be measured and monitored: on scientific and medical equipment, such as magnetic resonance tomographs; in industry on equipment for smelting metals, or on transformer stations and large-scale electric motor drives, such as railroad locomotives.
The technical advantages of the new magnetometer are:
• Non-directional measurement thanks to isotropic, 3-axis Hall-effect probe, so the result is independent of the probe direction relative to the field
• very small sensor area gives pinpoint accuracy when measuring strong, non-homogeneous fields
• Simple operation using the PDA touch screen or MS-Windows PC software (everything is included in the package)
THM1176-PDA is a product of the Swiss company METROLAB Instruments SA, the leading supplier of precision Tesla-meters for high magnetic field strengths. It extends the program of test equipment for magnetic fields offered by Narda Safety Test Solutions to cover the low frequency range right down to DC fields.
|
|
With the INPHYNIX probe M magnetometer, new hands-on sessions based on magnetic induction are open.
Previous difficult and sensitive phenomena, linked to magnetic field, can be now accurately measured. As simple example : the characterization of B circulation around electrical line charged with only 100mA.
The probe M is more sensitive ( ten times more) than previous oldest Hall probe.
This dual axis sensor has very large bandwidth and is perfectly adapted to be daily used by students.
With additional INPHYNIX tools, like ISOFLUX or ABS (Ampère, Biot & Savart), you got in hands turn key solution with all educational equipments to create or improve more practice sessions with better sensitivity and accurate measurements. These sessions will perfectly follow up and supplement the theoretical courses of physics, electronic and math ( for Licence, Master, engineer’s schools…).
|
|
Blue Sensitive Photomultiplier in Standard Housing
- Features Hamamatsu R1527 photomultiplier
- Spectral response: 200nm-680nm
- Dark count rate: typically 100 cps at 24c
- Instrumental Response Function with TCSPC: down to 300ps
- Photomultiplier dynode chain specifically designed for fast photon counting applications
- Robust and light tight housing
- Compatible with FLS920 and OB920 spectrometers
Photomultiplier detection module specifically designed to operate in the single photon counting mode. The unit produces fast pulses generated by single photons. The output can be connected to a discriminator for single photon counting applications or to a constant fraction discriminator for applications of time correlated single photon counting.
|
|
|
The Dual-Channel Gated Photon Counter offers a convenient, integrated approach to photon counting that avoids the complexity and expense of older counting systems. No longer is it necessary to mix and match amplifiers, discriminators, gate generators and counters. The SR400 combines all these modules into a single, integrated, microprocessor controlled instrument. Complex measurement tasks such as background subtraction, synchronous detection, source compensation and pile-up correction can all be performed easily with the SR400.
|
|
|
The PicoHarp 300 is a high-end, easy-to-use, plug and play Time-Correlated Single Photon Counting (TCSPC) system. It is connected to a PC through a state of the art USB 2.0 high speed interface. A new design approach provides identical and synchronized but independent input channels. They can be used as detector inputs for coincidence correlation experiments or as a pair of start and stop inputs for TCSPC.
|
|
SKYWATCH GEOS N°11
Features
The SKYWATCH® GEOS N°11 is a high performance professional instrument benefiti
ng from our 25 years of experience in developing measuring devices. It uses only industry quality components and pressure, windspeed, humidity and temperature sensors that are made in Switzerland.
The SKYWATCH® GEOS N°11 is specially designed for intensive use in harsh environments.
Multi-purpose, accurate and equipped with large memory capacities with the ability of real time data transfer, the Geos 11 and its accessories are particularly well adapted for numerous activities.
|
|
|
Density influences the overall quality of manufactured products and density measurements guide the manufacturing process. For this reason, Micromeritics gas pycnometers are used worldwide to characterize raw materials as well as to determine the density of finished products.
|
|
The CHP 1 pyrheliometer is the latest development in the field of solar radiation measurement. This instrument offers the best accuracy and reliability.
CHP 1 fully complies with the most current ISO and WMO performance criteria for First Class Normal Incidence Pyrheliometer. Every CHP 1 is calibrated upon manufacture, and is supplied standard with a WRR (World Radiometric Reference) traceable calibration certificate.
The CHP 1 is fitted with a high quality connector for easy installation and maintenance. the drying cartridge ensures trouble free operation. As standard CHP 1 comes with both Pt-100 and 10k thermistor temperature sensors. The instrument covers the total solar spectrum between 200 to 4000 nm. CHP 1 is intended for use with any model Kipp & Zonen two-axis Tracker.
The CHP 1 is the perfect choice for high accuracy direct solar radiation measurements.
|
|
|
|
|
|
Ecotech 200 wet only rainwater sampler
The Ecotech Model 200 Wet-Only Rainwater Sampler is used for acid rain experiments. The sampler has wetted surfaces composed of inert materials to ensure that there is no contamination of rainwater due to chemically labile
species. A special version of Model 200 is also available specifically to sample snow and ice.
Features:
- Manufactured under license from Australian research institution CSIRO
- Microprocessor controlled with on-board data collection and storage facilities.
- Wet-only sampler controlled by tipping bucket pluviograph.
- Composite or multi-bottle collection.
Ecotech Rainmaster 1000 for measuring rainfall
The Rainmaster 1000 is a simple Tipping Bucket Rain Gauge used to measure rainfall. The Rainmaster 1000 collects rain water until the collection bucket tips over pouring our the water into a bottle underneath. This tipping action is calibrated to a known amount of water and the instrument will record the amount of tips to calculate the rainwater level.
- Tipping bucket operation (self emptying).
- Teflon coated bucket.
- No maintenance Teflon® bearings
- Quality reed-switch contact-closure output.
- Made from corrosion resistant materials.
- Collection capability for sampling or verification.
|
|
Universal precipitation gauge using the balance principle for liquid, solid, and mixed precipitation
It does not matter whether it is drizzle, sleet, hail or snow, the new OTT Pluvio² reliably and accurately measures both, the amount and the intensity of liquid, solid, and mixed precipitation.
It works according to the balance principle, taking account of external factors such as temperature and wind that could distort the results. Both, digital outputs (impulse/0.1 mm and frequency/status) and the serial interface, freely configurable as SDI-12 or RS-485, are available for transferring the data.
High-precision technology and robust design provide high accuracy and complete reliability.
Load cell and sensor electronics are hermetically sealed against damaging environmental influences. We have designed the carrier, bucket and protective housing parts to be particularly robust and we have ensured the use of high-quality materials.
|
|
The measurement of precipitation is an important element in efforts to maintain the water balance. Mierij Meteo plays its part in this respect by providing meteorological consultancy services and developing new products.
The model 200 rain gauge operates on the basis of a tipping bucket mechanism. The bucket is available in capacities that correspond with precipitation of 0.2 mm. The bucket assembly acts as a seesaw. As soon as the upper bucket is full, the lower “empty” bucket is lifted to be filled, while
the lower bucket is drained. The tipping bucket pivots on bearings which minimizes friction and wear. Each tip generates an electrical impulse.
The total precipitation during a certain period of time equals the number of impulses multiplied by the contents of the bucket used multiplied by a
constant. The rain gauge is designed for accurate operation with trouble-free service
|
|
Rain gauge type RG-50
Tipping bucket rain gauge sensor with collecting area of 200, 314, 400 and 500 cm². Resolution 0,1 or 0,2 mm. Simple connection of data logger.
|
|
Large Aperture Scintillometers consist of a transmitter and receiver for measuring atmospheric turbulence over distances from 250 m to 8 km. ET Systems deliver surface heat flux and evapo- tranpiration data from a complete, easy to use, package.
|
|
|
Sun trackers measure direct and diffuse radiation. The Kipp & Zonen sun trackers are all-weather, reliable and affordable tracking and positioning instruments.
|
|
Sensus data logger
Tripod
Internal lead-acid battery
Solar panel
Aerial sensor array
Sensors: Air temperature, Humidity, Wind speed, Rainfall, Solar radiation
Wind direction
Barometric pressure
Anchoring kit, with tools and compass
Customised carrying cases
Online Pro PC software
|
|
General description:
Schiltknecht Messtechnik AG supplies you a turnkey meteorological station customized to your specifications. The modularity of our system allows for a good quality at a moderate price. All the sensors that you will choose will be mounted and wired on a telescopic mast.You will only have to fix the mast and connect it to the building-system according to the diagram supplied with it.
Schiltknecht meteorological station is located on top of numerous well-known buildings and famous Architects and Planning-Bureaus are selecting them.
|
|
Vaisala Weather Transmitter WXT520 (replaces WXT510)
The new Vaisala Weather Transmitter WXT520 measures six of the most essential weather parameters: wind sped and direction, liquid precipitation, barometric pressure, temperature and relative humidity --- all in ONE instrument.
Features:
- Accuracy and stability
- Low power consumption - works also with solar panels
- Compact, light-weight
- Easy to install
- No moving parts
- Vaisala Configuration Tool for PC
- USB connection
- Housing with mounting kit IP66
Applications: weather stations, dense networks, harbors, marinas
|
|
General description:
The Weather Wizard III displays indoor and outdoor weather conditions at the touch of a button. Large display includes compass rose which shows continuously updated wind direction and wind speed information. With the Complete Weather Wizard III station, you'll also get daily and accumulated rainfall.
This basic station includes:
- Anemometer with 40' (12 m) cable
- Outside temperature sensor with 25' (7.5 m) cable
- Inside temperature sensor
- Console with AC-power adapter and battery backup (battery not included)
|
|
General description:
The Gill MatPack is a compact and lightweight multi-sensor weather station instrument that measures the most essential weather parameters. Gill ultrasonic technology, as used in the proven WindSonic anemometer, measures wind speed and direction.
Temperature and humidity are measured using industry standard probes housed in a naturally aspirated radiation shield. The instrument kit uses a rugged U-bolt mounting clamp that attaches to any vertical pipe up to 50mm in diameter.
The instrument can be supplied with either a digital SDI-12 output or a four channel analogue output option, suitable to interface with industry standard loggers. Low power consumption enables the weather station instrument to be used in remote locations where power is at a premium. An electrical junction box is fitted to the mounting bracket allowing convenient termination of all electrical cables.
|
|
Onset's weather stations save you time and money by offering plug-and-play convenience and research-grade performance. Learn more and compare all of our weather instruments.
Systems start at $215
Rugged design for long-term use in harsh environmental conditions
Plug-and-play Smart Sensors eliminate complicated wiring and programming
Web-based and standalone systems to choose from
Ideal for agricultural research, crop management, ecology studies and more
|
|
Wind velocity sensor
Sensor for wind speed. Measuring range:0,5 - 35 / 60 m/s, temperature range: -35°C to +80°C, material: aluminium
|
|
|
|
Other measuring instruments
