Other measuring instruments

89 companies | 186 products
Filters
  • What’s new?
    Submit
dial indicator tester - i-Checker 170 series

The i-Checker Series 170 checks the accuracy of indicators by calibrating dial indicators, dial test indicators and other electronic gauge heads by directly inspecting indicators...

dial indicator tester - 521 series

The MITUTUYO 521 SERIES ia a calibration tester that calibrates dial test indicators, electronic...

{{productDetail[4906]}}
xy scanner - GLIDER

Slightly curved or flat composite structures requiring manual inspection requires GLIDER X-Y Scanner's 2-axis (X-Y) encoding scanner....

xy scanner - WING

WING scanner is a 2-axis scanner that is used for ultrasonic inspections manually. In this device, one scanning axis is flexible, which adjusts to the contour of the part that is supposed to be inspected. For non-ferromagnetic...

{{productDetail[17434]}}
tribometer - UMT-2

The Bruker UMT-2 is a flexible Nanotribometer and Microtribometer specifically designed for testing mechanical and triobological materials.Its...

tribometer - UMT-3

The Bruker UMT-3 is a high load tribometer, specifically designed for testing mechanical and triobological materials. Its modular construction integrates...

{{productDetail[57554]}}
measurement computer - Millimar 1270

Hardware equipment of upgradable basic unit features motherboard pentium with 32 Mbytes RAM, 3.5" Integrated disk drive with 1.44 Mbytes capacity. The Hard disk drive comes with 2 GB minimum capacity including controller. Other features include intigrated 12" TFT high...

dial indicator tester - Optimar 100

The OPTIMAR 100 represents a user-friendly, cost effective, compact testing unit with ensured fast test controlled by software. The unit is extensively used for semi- or fully automated testing of dial indicators, dial comparators, lever-type test indicators, 2-point inside measuring devices, and...

{{productDetail[9205]}}
optical tweezer - E3200 Series

The E3200 series from Elliot Scientific includes optical tweezers systems that are component based. These are custom systems that can be supplied in modular form for the users to...

optical tweezer - 685 - 785 nm | E3100 Series

The E3100 Series are ELLIOT SCIENTIFIC'S portable, desktop single beam optical tweezers systems designed and developed for single beam trapping and manipulation of micron...

optical tweezer - 1070 nm | E3300 Series

The E3300 Optical Tweezers System is developed for micron sized particles and single spot trapping and manipulation. It is to be...

optical tweezer - 1070 nm | E3500 Series

The E3500 Optical Tweezers System is a completely functional unit that is controlled by a computer to enable the accurate and multiple spot trapping and manipulation of micron sized particles. It is created for connecting to high quality commercial instruments...

optical tweezer - E4100

The E4100 is a Quadrant Photodetector equipped with Force Measurement to provide nanometer resolution of the trapped particle.

Utilizing a sophisticated...

{{productDetail[36261]}}
GNSS receiver / dual-frequency power - 226 channels, IP67 | HiPer V

The HiPer V (by Topcon) is an adaptable receiver, capable of performing a number of differing tasks and functions. The designers and manufacturers have included Vanguard Technology's...

{{productDetail[23468]}}
optical measuring device / for tools - max. ø 50 mm | HELISCALE

This Optical measuring device is ideal for the remarkably effective monitoring of various...

{{productDetail[31548]}}
tribometer - BASALT-S2

The professional instrument BASALT-S2 is utilized for tribological measurement in order to investigate vital properties of the surface and material properties, including wear, friction and scratch resistance. As the most utilized Pin-on-Disc experiment setup, it has been...

{{productDetail[121425]}}
gap measuring system / for coating die slots - 0.038 - 0.2 in, 0.007 - 0.038 in | HPD, GPD series

The HPD series, manufactured by Cpacitec.® is utilized as a gap measurement system for coating die slot that has a diameter of...

gap measuring system / for coating die slots - 0.022 - 0.034 in | GPD series

Capacitec Spring Contact Gap Sensors is designed for customers demanding highly accurate and repeatable electronic method for measuring gaps when one or both the target surfaces are jagged...

gap measuring system / for coating die slots - 0.118 - 0.493 in, ø 0.04 - 0.75 in | 2HPB series

The 2HPB series is a unit manufactured by Capacitec company. It was manufactured in custom lengths up to 18" (500mm)....

gap measuring system / for coating die slots - 0.142 in, ø 0.236 in | 2HPS series

The 2HPS series by Capacitec is a gap measurement system which is designed for coating die slot. For this specific model, it is created having a customize length of up to 18"...

gap measuring system / for coating die slots - max. 5 mm

This is a gap measurement system manufactured by Capacitec which is designed for coating a die slot. Its manufacturer had discovered that the position of the wand is necessary...

{{productDetail[15734]}}
food oil sensor - CAPSens 5000 Series

The CAPSens 5000 is a food oil sensor manufactured by C-CIT. It is suitable for use in controlling...

{{productDetail[59234]}}
handheld ferrite content measuring instrument - FERITSCOPE® FMP30

The FERITSCOPE® FMP30 is a handheld ferrite content measuring instrument developed by...

{{productDetail[54320]}}
flash-point tester - MINIFLASH

MINIFLASH is the new Age of Flashpoint Testing system. It is a unique set of instruments that are used for automatic determination of flash point of liquids and solid samples as per the advanced standards of ASTM D7094. This procedure defines...

{{productDetail[25243]}}
rubber content tester / by jet evaporation method - ASTM D381, IP 540

The ASTM D381, IP 540 from Anton Paar, is a gum content tester that uses jet...

flash-point tester - ABA 4

The Abel ABA 4 closed cup tester is an automatic device used to measure the flash point, along with the lowest possible temperature...

flash-point tester - CLA 5

The CLA 5 model is manufactured by Anton Paar, and is a cleveland flash and fire point tester that is highly...

flash-point tester - PM 4

The Pensky-Martens Flash Point Tester PM 4 features a one-twist head which guarantees a safe, one-hand connection...

flash-point tester - Pensky-Martens PMA 5

The Pensky-Martens PMA 5 is manufactured by Anton Paar, and is a flash-point tester in low temperature. It...

{{productDetail[16352]}}
concrete resistivity measuring device - Resipod

The Resipod Model of Concrete Resistivity Meter, manufactured by Proceq, is specifically designed to calculate the electrical resistivity of concrete in a fully non-destructive...

concrete resistivity measuring device - Resipod Bulk Resistivity

The Bulk Resistivity test is considered as an optional method where the sample resistivity is being determined between electrical...

concrete resistivity measuring device - Resipod Geometric

The AASHTO TP 95-11 standard is restricted to specific sample geometries, and to an aggregate size of up to 1.5,...

{{productDetail[7242]}}
electrical insulation tester - ISO,API 8 C,AC F:340 ± 10 Hz,Ramp Rate:150 ± 10 Volts|EST

Electrical Stability Tester (EST)
The electrical stability (ES) of an oil-based drilling fluid is related to the stability of the emulsion and oil-wetting capability.
The Electrical Stability Tester for use with oil-based drilling fluids. Mud engineers depend on the electrical stability test to monitor a fluids emulsion stability...

{{productDetail[39431]}}
AC electrical resistance tomography (ERT) device - POLARES

The Polares is a product manufactured by PASI. It is made for archaeological surveys, and a shallow detailed investigations of pollutant plums in the ground. It is suitable for the...

electrical resistance tomography (ERT) device - 16G-N

In comparison to the other market products, a more innovative philosophy is used to design 16G-N with extreme modularity . An onboard computer allows the operator to fully manage the automatical acquisition...

seismograph ERT - 16SG-N series

The 16SG-N series is a seismic combined system with an electrical imaging. The system can be used easily with a multi-purpose instrument which gives important...

earth resistivity measuring device - 16 GL-N

The 16GL-N of PASI is a 13-bit unit that constitutes a huge step forward in the field of electrical resistivity measurement...

{{productDetail[57451]}}
earth resistance and earth resistivity meter - 25 / 50 V | MRU-200

The MRU-200 provides measurement of earth, and impulse earth resistance. The unit is suitable for...

earth resistance and earth resistivity meter - max. 40 V | MRU-105 / 106

The MRU-105/106 is a portable meter used for earth resistance and resistivity measurement. Using 2, 3 or 4 poles method, the device can measure the resistance. With...

earth resistance and earth resistivity meter - 25 / 50 V | MRU-120

The MRU-120 is an earth resistance and earth resistivity meter developed by Sonel. It is supplied with 25 V to 50 V measuring voltage, 990 measurement results memory, USB or wireless data transmission, and indication of battery...

earth resistance and earth resistivity meter - 25 / 50 V | MRU-21

The MRU-21 is an earth resistance and earth resistivity meter developed by Sonel. It is supplied with high resistance to interference voltage, 25 V to 50 V measuring voltage,...

earth resistance and earth resistivity meter - 25 / 50 V | MRU-20

The MRU-20 is an earth resistance and festivity meter. It is integrated with an automatic...

{{productDetail[30613]}}
earth resistivity measuring device - A6000E

The A6000E Series , manufactured by Mae®, is a digital logger that is utilized for measuring the resistivity in the ground along with the technical SEV or multielectrode. It also merges all the elements to carry...

earth resistivity measuring device - X612-EM

X612-EM represents a new conception of geo resistivimeter to measure resistivity, multi electrode tomography, measuring the spontaneous potentials, chargeability, induced polarization (I.P.) or V.E.S. (Vertical Electric Survey). The instrument has all the elements to perform vertical geo-electric and multi-electrode...

earth resistivity measuring device - C111-E

The C311E is suitable for use in vertical electrical surveys (VES). The unit provides measured values of current, potential, and...

seismograph ERT - A6000SE

The A6000SE Model of An Electrical Resistance Tomography (ERT)/Combined Seismograph, manufactured by MAESrl,...

{{productDetail[104001]}}
microwave consistency sensor for wastewater - 344W

This application Microwave consistency sensor A 344W is used for urban wastewater treatment plants. The sensor A 344W takes a measurement for the complete solid content the activated sludge in wastewater for the outputs from the main segmentation tang. The development...

{{productDetail[118011]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation