|
|
The highly integrated and easy to operate LHS SYSTEM - line leaves no wish unfulfilled. The air heaters can be externally configured and monitored via the Leister-Bus. As with the LHS PREMIUM - line, the manufacturer of temperature probe, temperature controller manufacturer and power electronics, as well as device and heating-element protection, are also built-in. With the LHS SYSTEM -line and its operating units and interfaces, you know the status of your air heaters at all times.
• Simple installation of the Leister-Bus with standard network cables (RJ45 suppliers of connectors)
• Temperature steplessly adjustable
• Integrated probe and temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Compatible with the existing Leister professional blower and nozzle suppliers range |
|
With their integrated temperature probe, supplier of temperature controller and power electronics, the LHS PREMIUM - line devices guarantee a very high level of process reliability. The temperature is steplessly adjustable with the manufacturer of potentiometer. The built-in device and heating element protection ensures that the air heaters are not damaged by excess temperature even under exceptional circumstances. An upgrade to the LHS SYSTEM - line is possible at any time.
• Temperature steplessly adjustable
• Built-in temperature probe
• Fully integrated temperature controller
• Integrated device and heating-element protection with alarm output
• High process reliability
• Small dimensions, big performance
• Upgrade to the LHS SYSTEM-line possible
• Compatible with the existing Leister professional blower and nozzle suppliers range |
|
• Professional blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive pneumatics and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order |
|
Technical data :
Types : 3/950S 7/950M
Max. temperature : 950°C 950°C
Frequency : 50Hz 50Hz
Voltage : 3x400V 3x400V
Power : 3 kW 7,5 kW
Max. pressure (NH3) : 0,6 bar 0,6 bar
Max. flow (2N+3H2) : 3 m3/h 7 m3/h
External dimensions : L 560mm L 850mm
(±10%) H 865mm H 1000mm
P 810mm P 560mm
Equipment :
- Metallic casing containing the heating and cracking element.
- Overpressure cock.
- Professional filter at the cracker outlet.
- Flowmeter with a regulating valve.
- 2 independent outlets with a regulating valve (model 3/950S).
- 3 independent outlets with a regulating valve (model 7/950M).
- 1 independent outlet with a regulating valve and a flowmeter for low flows (model 3/950S).
- Digital temperature control unit with safety function for gas inlet (910 and 980°C).
- Gold fuse to avoid overheating.
- Thermocouple placed inside the heating chamber.
- Cracker to be used with gaseous ammonia only. |
|
UNIFORGE®
Unitized Solid State Induction Billet/Bar Heating System
Features / Benefits
Unitized workcell design for low installation time and cost.
Infeed and outfeed mechanics, integrated professional coil line and manufacturers of power supply for minimum use of floor space.
Voltage fed, high efficiency series industrial inverter with 0.95 input power factor over full operating range.
Series manufacturer of capacitors to match connected induction coil/load.
Built-in annunciator professional panel for simplified status/fault diagnostics.
Single control board, field replaceable for easy maintenance.
Backed by the world's largest designer and manufacturer of induction heating equipment.
Self-Contained Design With Built-in Power Supply
The UNIFORGE® heating system is a compact, unitized induction billet/bar heating system incorporating a solid state power supply, induction heating coil(s), operator professional control panel and material handling system. The unitized construction of the UNIFORGE® eliminates the need for interconnections between separate components typical of conventional heating systems, saving floor space and installation time.
Job Matched Induction Heating Systems
UNIFORGE® is designed for forging, mass heating, annealing, extruding and many other induction heating applications. Its concept easily adapts for continuous bar and tube heating or for partial heating of billets and tube. Power and frequency combinations are available from 100 kW to 1000 kW and 500 Hz to 30 kHz. Full power draw over a wide range of billet sizes.
|
|
Its qualities become especially apparent where large quantities of heat in a limited space are required. It is so handy that even the most inaccessible places can be reached. Thanks to its new brushless motor suppliers, maintenance is reduced to an absolute minimum. That simply makes it a reliable, cost-effective and powerfull device.
• Light and handy
• Deployable as a built-in device and a hand tool
• Large air flow and high temperature
• Integrated device and heating element protection
• Works in every professional fitting position
• Wied range of accessories |
|
Lytron is at the forefront of cold plate innovation, offering seven different cold plate technologies—the broadest range in the industry. With full custom design and build capabilities, plus over 30 standard parts, Lytron can solve all your thermal challenges.
Lytron offers more cold plate technologies than any other cold plate manufacturer. With tubed, flat tube, and performance-fin cold plates, you can be sure that whatever your thermal and geometric requirements, Lytron has the technology you need and the experience to tailor it to your application.
Lytron’s standard cold plate technologies can be customized and integrated into sub-assemblies.
|
|
The elements are specially shaped so as to obtain the best curtain type exchange surface and are fixed on a stainless steel or steel plate. Fitted with an electrical connection box separate from the plate for uses at temperatures over 120 °C, the professional batteries may be powered by three-phase supplies up to 750 V.
The industrial heating elements are wired with high temperature professional cables, generally in busbars mounted on insulators at one or more rates.
Designed to be used at temperatures up to 850 °C, the plates may be mounted on steel or stainless casings to allow their installation on the professional duct network
Devices can be produced according to ATEX directives.
|
|
Fluxtrol professional concentrator manufacturing and application technique plays a very important role in successful performance of induction coils. With respect to Fluxtrol concentrator application - magnetic, thermal and mechanical aspects must be considered. Additionally, the electrical strength of our concentrator must be considered or insulation provided.
This section is intended to provide methods for safety, handling and machining FLUXTROL® & FERROTRON® concentrator materials when applying the product to induction coils. |
|
BOILERS WITH SERPENTINE MANUFACTURERS OF HEAT EXCHANGERS
Boilers get heating energy from solar collector or central heating system and produce potable hot water. Fluid in the serpentines provides heat transfer water to water via transferring its heat energy to water in inner tank. Thus potable hot water will be produced.
Cylinder type hot water tank and serpentines in the tanks is coated with immersing to hot galvanize. Thus anode rod is not needed and you save your time and cost for changing anode rod. Due to special coating material heat transfer is faster and heating efficient is high.
You can observe water temperature with industrial thermometer. You can set desired temperature with adjustable thermostats suppliers mounted to sensor holes. When water temperature has achieved desired temperature, thermostat will send a signal then circulation and recirculation pumps will be out off service. Thus it will prevent waste operation.
DCSB and DTSB series boilers are available for additional industrial heating elements. Thus, especially in summer periods you can provide hot water with electrical supply without using central heating system. If you use DCSB-X and DTSB_X Series model with electrical command panel ask for temperature pressure cock which provides discharging excess water/steam pressure and temperature. |
|
DEMK Central System Electrical Heater Tanks
DEMK series is central system electrical heating tanks, which is designed to meet users special request and its power, can be designed to desired rates. Heating operation can be controlled by command panel on tank.
Water temperature can be adjusted by user via digital thermometer manufacturers on panel cover.
DEMK series; has three different power rates; 60kw, 90kw and 120kw. Serpentine line can be attached for solar collector line or underground heat sources.
Advantages of DEMK series electrical heating tanks
* Leakage or default current breaker,
* Human life safety for contacting electrical equipment,
* Protection and warning system audible and visible for excess temperature rises,
* Reliable temperature limit, room thermostat manufacturers commanded space temperature control,
* Sensitive setting for desired water or space temperature,
* Protection and warning system audible and visible against operation without water,
* Stepped power usage or if you choose full economical and programmable energy usage model. |
|
| High pressure professional blower is installed. This can use as the air resource of the rapid removing water by combining with the air manufacturers of nozzle, and the drying of the piping that has big pressure resistance. |
|
DESCRIPTION:
Completely autonomous industrial hot air generator with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments operation is that one of heating the environmental air by using the thermal energy produced by the equipment. The produced heat is driven by a centrifugal fan manufacturers to the premises that must be conditioned.
The combustion products are driven through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil operation, natural gas or liquefied petroleum gases.
-Closet made with galvanised sheet covered with polyester dust and dried in the professional oven at 200ºC.
-Combustion oven designed for obtaining a performance of 90%.
-Electronic control with a viewer of the temperature driven to the premises.
-Environmental thermostat manufacturer included in the equipment.
-Base equipment prepared for being connected to air distribution pipes. You can ask for a 4-direction air distributor plenum with air directional grids.
-Possibility of coupling a digital time programmer for starting the equipment up and stopping it automatically according to user’s necessities.
|
|
SYSTEMS TO WARM AIR CONVECTION
A warm airblast, when the amount and the temperature are very controlled, can represent the ideal solution for infinity of applications in the within of the production and the rework of cards. Our systems to convection are an optimal example of "ideal solution".
|
|
-The Air Process heater will provide hot air and gas up to 1000°F (540°C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
-For easier installation, Hotwatt can supply male or female NPT threaded professional fittings, professional hose adaptors, flanges, or custom fittings to your specifications.
Applications: Baking, Drying, Laminating, Metal Working, Packaging, Thermoplastic welding, Preheating, Sealing, Soldering, Shrink Fitting, Synthetic Professional fabric Sewing. |
|
AIR INDUSTRIAL GENERATOR FOR SWIMMING POOLS "POOL MANN"
PM-050 / PM-100
DESCRIPTION:
Completely autonomous manufacturer of hot air generator designed for conditioning covered swimming pools. This equipment can operate with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas).
These equipments function is to heat environmental air inside the premises by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of a centrifugal fan.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are as following:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Cupboard made with galvanised sheet covered with polyester dust dried in the professional oven at 200ºC.
-Combustion oven designed for obtaining a performance of 90%.
-Three-speed centrifugal professional fan.
-Electronic professional control with a display of the temperature driven to the premises.
-Environmental thermostat manufacturers incorporated in the equipment.
-Air impulsion in elbow shape at 90º with double deflection grid incorporated on it.
-It incorporates a digital time-programmer for starting-up and stopping automatically the equipment. |
|
These high quality professional Hot Air Industrial guns feature a built-in temperature sensor that regulates and professional monitors the set temperature, LEDs to indicate temperature range selected and an adjustable air-flow driver for precision working. They also have a selectable cool-air stage for drying, cleaning or cooling which may be suitable for other applications.
Featuring:
• Continuously variable air flow
• Optical temperature professional display at 50 - 100 - 200 - 350 - 500 - 650°C
• Continuously variable temperature
• 50°C for drying applications
Specifications:
Power supply manufacturers: 110V a.c. or 230/240V a.c. (please advise which is required)
Output: 240V a.c. 2,000W, 110V a.c. 1,400W
Temperature: Stage 1 – 50°C, Stage 2 – 50 to 650°C
Air flow: Minimum 200l/min. Maximum 500l/min
Weight: 885g |
|
ELECTRICAL PROFESSIONAL WATER HEATERS WITH SINGLE HEAT EXCHANGERS MANUFACTURER (THERMO PROFESSIONAL BOILER)
Thermo boilers get its heating energy from solar collector, central heating system or electric heating element and produce potable hot water. Fluid in the serpentines provides heat transfer water to water via transferring its heat energy to water in inner tank. Thus potable hot water will be produced.
Professional cylinder type hot water tank and serpentines in the industrial tanks is coated with immersing to hot galvanize. Thus anode rod is not needed and you save your time and cost for changing anode rod. Due to special coating material heat transfer is faster and heating efficient is high.
You can set desired temperature with adjustable thermostats manufacturers mounted to sensor holes. When water temperature has achieved desired temperature, thermostat will send a signal then circulation and recirculation pumps will be out off service. Thus it will prevent waste operation.
DTB series boilers have additional industrial heating elements. Thus, especially in summer periods you can provide hot water with electrical supply without using central heating system. |
|
We provide environmentally safe incineration plants, using multiple hearth type, moving grate type and rotary kiln type incinerators for the destruction of the following wastes:
- Municipal Refuse
- Hazardous Waste
- Plastics
- Hospital Waste
- Infectious Waste
- Contaminated Soils
- Off Grade Products
- Industrial Waste
- Low-Level Radioactive Waste
- Paper Processing Waste
- Solvents & Waste Professional oils
Ducon provides complete waste-to-energy plants for generating steam or electricity from municipal waste.
|
|
HEATER FOR SHEAR-BAR - heating lines with hot cutting shear :
* FCB15-600-2,4. Heater mod. FCB15, 600 Kw,2,4 Khz, output 1600 kg/h.
* FCB 36-1500-1. Heater mod. FCB 36, 1500 Kw, 1 Khz, output 4000kg/h. |
|
The induction coil is the heart of the bar professional heater. At Newelco professional coil design benefits from many years of practical experience gained as world leader in induction heating, together with utilisation of the most up to date materials and technology. This combination enables designers to provide the most efficient use of energy while heating professional bars to optimum forming temperatures.
Efficiency:
-Bar heaters from Newelco provide:
-High energy efficiency
-Enhanced productivity
-Optimum forming temperature
-Environmental acceptability
-Shorter start up time |
|
FC6-280-4. Heater mod. FC6, 280 kw, 4 khz, output 800 kg/h, with complete deionised water closed loop circuit.
FC15-600-2,4. Heater mod FC15, 600kw, 2,4khz output 1770 kg/h with automatic feeder at inclined sections.
FC21-1000-1. Heater mod. FC 21, 1000 kw, 1 khz, output 3000 kg/h with 3 way accept/reject system, automatic multiblade feeder and vibratory table with bin tipper.
FC36-1500-1.Heater mod. FC36, 1500 kw, 1khz output 4500 kg/h, with semi- automatic feeder. |
|
|
Other thermal equipment
