|
|
Multiple Stream Additive Injection
The Mini-Pak 6 Injector Controller has been designed to meet the market requirements for shared electronic packages, small in size with the dependability of the proven Mini-Pak technology. The PCM3 electronic control module combines all the features and flexibility of six individual Mini-Pak modules into one. It is the injector of choice when there are multiple injection points on each load rack. Its compact size takes up less room on the load rack, and with its PCM3 controller, reduces costs by controlling up to six MonoBlock II’s with one electronics module. The MP6 controller and 6-Pak panels are the injectors of choice when there are many injection points on each load rack. Its compact size takes up less room on the load rack and with the MP6 controller, reduces the cost by controlling up to 6 MBII’s with one electronics module. |
|
CMA albedometers are suitable for measuring global radiation and/or albedo over many differing types of surface. The upper pyranometer measure incoming global solar radiation and the lower sensor measures solar radiation reflected from the surface below.
|
|
SCAIME offers all the electronic composants to pressure the right measuring chair accuracy:
- Analogical Professional transmitters with output 0 +10V or 4-20mA
- Digital Transmitters with output in RS485, modbus-RTU and Profibus-DP
- Panel indicators
|
|
DigiRail - Signal conditioning and digital transmitter
The DigiRail line of smart industrial transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems. Featuring up to two universal input analog signal channels they are the most economical way to deliver analog inputs to PROFESSIONAL PLC´s and SCADA systems. The input signals are isolated from power thus protecting the electrical instruments by eliminating ground loop effects. This reduces substantially the undesirable interferences and instabilities in sensor measurements.
Analog inputs: programmable for supplier of thermocouples (J, K, T, E, N, R, S, B), Pt100, mV, V, mA.
Cold junction compensation for thermocouples and compensation for Pt100 3-wire cables.
Digital inputs: in voltage, 4 to 35 V to activate. Internally limited current in 5 mA.
Digital outputs: 3 A / 250 Vac SPDT relay, resistive load.
Power: 10 to 35 Vdc, 50 mA maximum current.
2-wire RS485 communication with Modbus RTU protocol. Configurable address and baud rate (1,200 to 115,200bps).
Key for resetting communication parameters to original factory default.
Accuracy (at 25 °C): Pt100, mV, V and mA: ±0.15 % of full scale.
Cold junction compensation for thermocouples: 1 °C at 25 °C. ±0.05 °C / °C.
Isolation: 1000 Vac from inputs (analog or digital) and power or communication.
Dimentions: 72 x 78 x 19 mm.
Mounting: 35 mm DIN rail.
Working temperature: 0 to 70 °C. |
|
The AMT&C's in-house automated device for measuring magneto-dependent properties of substances incorporates the company's wide experience in designing magnetic field sources and conducting research in magnetism. The device is intended for the studies on various magnetic properties of substances - magnetocaloric effect, magnetic susceptibility, magnetic specific heat, etc. The device makes it possible to carry out high-precision measurements of the physical properties of materials in a broad range of magnetic fields and temperatures.
Basic components of the system:
- cryostat,
- temperature control and stabilization unit (77 to 370 K)
- adjustable Nd-Fe-B permanent magnetic field source (up to 2.0 T, adjustment rate up to 8.0 T/s and more)
- measuring instruments
- professional software for monitoring measurement procedure and data processing.
For more information please contact Alexander Sinyakov, export sales manager |
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas professional monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
Model 3542 Axial Extensometer - General purpose extensometers for axial tensile, compression, and cyclic testing. Gage lengths from 0.5 to 2 inches (10 to 50 mm) are available in measuring ranges from 5% to 100% of the gage length.
Model 3542L Axial Extensometer - Axial extensometer specially designed for long gage length applications where low level strain measurements are required.
Model 3442 Miniature Extensometer - Very small, rugged, yet ultra-light weight. These units are widely used for testing small and delicate samples. Ideal for many biomedical tests, as well as for wire and thin sheet materials. Also great for low cycle fatigue testing where short samples are used.
Model 3543 Long Gage Length Extensometer - Available in gage lengths from 2 inches (50 mm) and larger with measuring ranges up to 4 inches (100 mm), these extensometers allows the capture of the full stress-strain curve to failure.
Model 3560 Averaged Extensometer - A single integral unit that provides averaged axial strain measurement. This model is also configurable with options for measuring both the averaged axial strain and a transverse strain.
Model 3800 High Elongation Extensometer - Designed for plastics, rubbers, and elastomer testing, these extensometers have very long measuring ranges. Their unique design allows testing to failure and minimizes interaction with the sample.
|
|
| Vishay proposes several technical solutions to measure uninterrupted the traction of band exerted on a professional plastic film, paper, on sheet, fabrics, and generally, all that ravels uninterrupted on rollers, this starting from 20 daN up to 100 tons |
|
To optimise the life of your drive, you need :
- a professional belt designed for your application
- a perfectly tensioned belt
- perfectly aligned pulleys
Thanks to its know-how, Hutchinson puts at your disposal Easytec, its new universal tensionmeter.
This new tool is essential for your daily successes in measuring belt tension as its is compact, easy to use and provides accurate measurements.
For further information, please feel free to contact us.
|
|
A professional belt drive achieves its maximum lifetime when it is configured specifically to the application, the belt is perfectly tensioned and the pulleys are precisely aligned.
The TRUMMETER is an electronic measuring instrument that consists of a measuring probe and a microprocessor and is used for measuring the belt tension and checking the strand force of a belt drive.
The measurement result is displayed either in hertz, newtons or poundforce.
This measured value can be compared with the nominal value – specified by the belt drive manufacturer (as a natural frequency in Hz or a strand force in N). It is dependent on the characteristics of the drive. |
|
A single integral unit provides simultaneous lateral (transverse) strain and averaged axial strain measurement. The unit is also available as an averaged axial extensometer alone.
This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson's ratio. The Model 3560-BIA uses a design unique to Epsilon, where the knife edges remain parallel during the displacement. This approach greatly reduces crosstalk between axes and allows use on round or flat specimens with equal ease. These extensometers are very easy to mount. Integral springs hold the unit on the test sample. The parallel multiple flexure design makes these units very durable. |
|
The novel tensiometer PocketDyne is characterized by its high flexibility and mobility in use. You can measure under any conditions possible and virtually in any beaker, container or tank.
The ease of use is underlined by its robustness and ergonomic design following the long tradition of KRÜSS in this direction. The PocketDyne can be operated using one hand only. The three large function keys are easily reached by the thumb of your hand.
An ergonomic study lead to a design where the upper part is bent slightly ensuring a perfect readability of the display in any measuring situation you may encounter. This is also facilitated by the large and high-contrast display.
|
|
The handy LAUDA bubble pressure tensiometer MPT C records fast surfactants in millisecond range.
Ultimate user-friendliness is achieved without having to take a detour via the PC. The extremely compact stand-alone device offers all the
necessary features for the simple measurement of dynamic surface tensions in the laboratory or as a mobile device.
Application examples:
- Optimisation of drop sizes
- Determination of surfactant consumption
- Measurement of dynamic surface tensions in a time range of below
one millisecond up to 20 seconds
- Simple measurement of higher-viscosity and biological solutions
- Exact determination of concentrations above the critical micellar
concentration
- Monitoring processes with an online flow cell and extended professional software functions
- Surfactant production
- Surfactant content in waste and cleaning water
- Washing processes and their surfactant consumption
Performance profile and advantages:
– Extremely large dynamic range from 1 ms up to several seconds
– Automatic recognition of the transition point bubble/jet range
– Tabular representation of the dynamic surface tensions,
number of measured points, real bubble age
– Graphic representation of the dependency of the dynamic surface
tensions on the bubble age, linearly or logarithmically
– User-defined measuring point distance and duration of the measurement
– Storage of up to 50 measured results including the accompanying
parameters
– Numerical description of samples determined by the user
– Output of the measured values on an optional professional printer or PC via
RS 232-interface
– Plug-in boards with relay output in order to control the processes via
the surface tension |
|
| PM Series™ Imaging Photometers and Colorimeters are highly accurate, CCD camera-based systems useful for making precise spatial measurements of luminance and chrominance. All of our PM Series™ products include Radiant Imaging's powerful manufacturers of data acquisition and image processing professional software. This tool simplifies system control and provides easy access to a number of analysis capabilities, including chromaticity coordinate information, color temperature, angular dependence of display properties, and even Mura defect detection. Built-in support for ActiveX controls allow the experienced user to develop customized applications, and to perform automated testing using software such as LabView, Matlab, VBA, VBScript, Javascript, C and C++. |
|
Multinorm Combined Indoor Air Quality and sound analyser
Universal all-in-one instrument for measurement of air temperature, air velocity, relative humidity, illuminance, luminance and Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound analysis.
• Measurement functions: air temperature, air velocity/multipoint/mass flow calculations, relative humidity/dew point, illuminance and audio level meter and analyser. Completely digitalized Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound level meter with two independent measuring channels compliant with IEC 61672 standard. Each channel can be set with different time and frequency weighting. Multinorm is also a real-time octave and one third octave frequency analyser compliant with IEC 61260 standard.
• Operates in two modes: in an on-line reading mode which professional displays current measurements and in a logger mode, which automatically stores all measurement values per logging interval.
• Dimensions (w x h x l): 220 x 115 x 90 mm.
• Mass (without accessories): 0.70 kg.
|
|
Optical metrology equipment for climatologists and meteorologists
The industrial laser ceilometer from JENOPTIK Laser, Optik, Systeme GmbH measures such atmospheric parameters as cloud height, visibility and the height of a planetary boundary layer. The product provides the first ever metrological device to safely detect also cloud layers and cirrus clouds at height levels up to 15 kilometers. This marks a major progress in the science of meteorological and climatologic forecasting. Measurement is accomplished with an opto-electronic laser detector that relies on the LIDAR principle, an optical version of radar: A solid-state laser emits light pulses into the atmosphere. The light which is scattered by air and aerosol molecules is collected with a specific optical setup to be detected by a highly sensitive photo receiver (APD). By analyzing the pulse transit time and the intensity of backscattered light portions, smart algorithms compute a high-resolution aerosol height profile along with other related measurement readings. With integrated heating and cooling functionality and designed for autonomous operation, the CHM 15k can be relied to perform in any weather conditions.
|
|
The MG3 represents the very latest technology in resistance weld monitoring; it provides precision real-time dynamic measurement of all the brazing variables.
With increased emphasis on accountability, the MG3 Digital Process Sentry offers the tools required for process development, production monitoring, data collection, and analysis to support your ISO, GMP and TQM requirements.
|
|
The HC-MDi check weigher is an efficient combination of checkweigher and industrial metal detector. The “i” in HC-MDi stands for the metal detector. It is fully incorporated within the checkweigher, so that weight module and metal detector form one single unit. The combination is achieved within the tightest of space constraints with a central, single point menu operation for both devices via the weighing module controller. The HC control concept is based on a fully integrated industrial PC system.
It has an output capacity of 400 pieces / min. What is more, in terms of measurement precision, it operates with a maximum standard deviation of 50 mg over a gross weighing capacity of 3750 g. The sub-frame is made entirely of stainless steel and meets a protection rating of IP 65 (spray water from above). This makes it predestined for use in the food industry. The HC-MDi weighs packed and unpacked food products with precision and additionally checks them for metal contamination. When the product input is changed on the checkweigher, these parameters are communicated automatically to the metal detector. As an integral part of the device, the high frequency metal detector can detect very low-level contamination in the form of steel, iron, stainless steel, aluminium, copper, brass etc. |
|
"EUROCUBO" plastic calibrated forms for cubic test pieces
EURO CUBO is a plastic calibrated form to package and easily deform cubic test pieces in cement mix 150mm side. Safety,
precision and time saving in mounting and dismounting phases are guaranteed.
EURO CUBO has been designed in conformity with the current technical UNI standard regulating the “shape, dimensions and
tolerances of concrete test pieces packaged in the shape of cubes, cylinders and prisms, and the forms required to product
them”
|
|
The concrete test hammers are used for the non-destructive control of the concrete quality. The compressive strength fc is established by converting the measured hardness (rebound R) of the concrete surface. Hammers of various impact energies can be used according to the form and sizes of the concrete structures.
Types with paper strips register the rebound automatically on the paper.
|
|
Addressing the industry need to create a concrete test hammer that can deliver accurate readings on virtually any concrete from any direction, on any surface without the need to compensate for impact direction, Switzerland-based Proceq announces the new SilverSchmidt concrete test hammer.
The Swiss-made SilverSchmidt is ergonomically designed and offers unprecedented benefits when measuring the compressive strength of on-site concrete structures. The SilverSchmidt measures the true rebound coefficient (termed “Q”-value) and converts it to compressive strength. The instrument is controlled via a graphic user-interface featuring a single button and inclination
sensing.
Features of the SilverSchmidt include: extended range, improved ease of use and more reliability, as well as higher readability. The SilverSchmidt comes with various modes of statistics, built-in corrections for carbonation, and up-to-date conversion curves for a variety of modern concrete mixtures.
The SilverSchmidt complies with most international standards.
To assure the compatibility with the established standard, the unit also professional displays the “R”-value. |
|
The combination of the ORIGINAL SCHMIDT Concrete Test Industrial hammer, which has an electronic display unit makes the DIGI-SCHMIDT Digital Concrete Test Hammer ideally suited for systematic high volume measuring.
Various parameters such as impact direction, form and time factors, depth of carbonatization etc. can be set. The compressive strength will be automatically calculated with the integrated conversion curves.
Extensive display, evaluations and storage of data as well as transmission to professional printer and PC are possible.
|
|
Test hammers are used to determine the surface hardness of concrete and are one of the most widely used instruments in the field of non destructive evaluation (NDT) of concrete compressive strength. It is the quickest, simplest and least expensive method to obtain an estimate of the quality and strength of the concrete.
Both mechanical and digital test hammers are available.
Elcometer 181 Mechanical Concrete Test Industrial hammer
This simple to use gauge consists of a spring loaded plunger which, when released, strikes the surface with fixed and constant impact energy.
Elcometer 182 Digital Concrete Test Hammer
The digital and more advanced version, is equipped with an electronic transducer which converts the rebound values into a reading on the digital display. It professional displays a range of statistics and there is a facility to download to a PC.
|
|
The concept of the DSA100 encompasses everything from fully manual to fully automated contact angle measurement. Due to its modular concept, virtually any level of automation can be achieved - even with post-sales additions.
Flexible sample size, flexible measuring technique - with its double modularity concept KRÜSS GmbH has revolutionized contact angle measuring technology. No matter what measuring problem you have to face - the DSA100 will grow to meet your requirements. A total of more than 30000 different combinations is available from the DSA100 building block system; any necessary or required degree of automation can be realized in next to no time. |
|
EasyDrop Standard for PC operation and EasyDrop USB for working with a notebook: with these two instruments in the new KRÜSS product range measuring contact angles and surface free energy is as quick and simple as rarely before. The duo offers everything required for both routine lab work and on-site measurements. Quality managers gain quick access to reliable results. Scientists use the sophisticated analytical tools for research at a high level. The chiefly manual components ensure that EasyDrop remains favorably priced despite its high performance level.
- Contact angles easy and fast
- Fast and precise dosing and sample positioning
- Budget-friendly thanks to manual operation
- Several drop shape analysis methods for big and small angles
- Surface energy by all established methods
- Surface tension with the pendant drop method
- Comfortable evaluation and data management
|
|
|
Other measuring instruments
