|
|
Measure flow from outside a pipe. The Greyline DFM 5.0 is designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.
- Non-Contacting Ultrasonic Sensor
- Large, Backlit LCD Display
- 12-Digit Totalizer
- Reverse Flow Measurement
- Isolated 4-20mA (1000 ohm)
- 2 Programmable Control Relays
- Automatic Sensitivity Adjustment
- New Signal Processing System
- Built-in 5-Key Calibrator
- RFI Rejection Filters
- Optional 2 million point Data Logger with USB output to Flash memory
|
|
Hybrid
Blue-White introduces Sonic-ProTM Hybrid Ultrasonic Flowmeters.
Sonic-Pro has the ability to measure fluid flow using either Doppler or Transit Time methods. Additional features include: Non invasive clamp-on transducers; Custom metric algorithms and DSP technology ensures reliable, accurate measurement; easy reading LCD; data is logged to a standard SD card format supplied with each unit; isolated 4-20 mA output is fully configurable; 0 - 1000Hz Pulse Output is fully configurable; computer connection permits remote access to, and control of, all functions including: real time display, system configuration, data logging, remote data capture and process control functions. Sonic-Pro is IP66.
|
|
|
Dynasonics hybrid ultrasonic flow meters utilize both Doppler and transit time sound techniques and automatically select the correct technology to calculate the flow rate. This dual technology provides an accurate measurement of the volumetric flow of clean, solids-bearing or gaseous liquids on full pipes. Adverse flow conditions - surges, particulate, gas pockets, etc. - will not clog, damage or influence accuracy of the "flow-through" meter design.
|
|
|
The Series TFXL ultrasonic transit time flow meter is a reliable and cost-effective flow meter designed to replace mechanical meters where liquid conditions damage or impede operation. This non-invasive flow meter requires no maintenance, as it clamps on to the outside of the pipe. It provides a 4-20mA analog and simulated turbine meter frequency output, interfacing with a variety of monitoring equipment. The TFXL is available in an integral mount system for pipes size .5" (12mm) to 2” (50mm), and a remote system for pipes size .5" [12mm] and larger.
|
|
KROHNE’s OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate. The new OPTISONIC 6300 clamp-on flowmeter with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.
|
|
|
The Series TFXP Portable Transit Time Flow Meter features an advanced non-invasive flow measurement technology, providing a system with unsurpassed accuracy, versatility and ease of installation. Although designed for cleaner liquids, the flow meter can reliably measure liquids containing moderate amounts of suspended solids or aeration. Designed for long or short-term flow measurement surveys on full pipe liquid systems.
|
|
Recommended for clean fluids like water, glycol, oil and most chemicals. Portaflow ultrasonic sensors strap-on the outside of vertical or horizontal pipes from 2" to 40" (50 to 1000 mm) diameter. The ultrasonic signal travels through all common metal and plastic pipe materials. Sensors can be mounted without shutting down flow and there is no obstruction or pressure drop. Flow rate and totalizer are displayed continuously along with battery status, signal strength. Press one key to instantly change the units of flow measurement (e.g. from gallons to liters). Real time flow can be displayed in large numeric values or as a graph.
- Strap-on Ultrasonic Sensors
- Internal Battery and/or AC Powered
- Easy Calibration and Set-up
- 50,000 point Data Logger
- RS232 Serial Output
- 4-20mA Output
|
|
|
Series UFX Hand-held Doppler Flow Meters provide accurate and reliable flow velocity assessments in closed pipe, liquid systems. UFX requires that the liquid be either solids-bearing or aerated at a minimum of 100 ppm. The product utilizes a single, hand-held transducer which is placed on the outside of metal or plastic pipe. Within seconds after placing the transducer, the large LCD will provide a velocity reading in either FPS (feet per second) or MPS (meters per second). The UFX comes with a flow calculator/slide chart for conversion of velocity measurements to popular volumetric measurements.
|
|
It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 4.0 is fast and easy to operate – you can mount the sensor on the outside a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 4.0 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.
- Strap-on Ultrasonic Sensor
- Internal Battery and/or AC Powered
- Fast, Easy Operation
- Built-in 3-Key Calibrator
- Programmable Totalizer
- 50,000 point Data Logger
- RS232 Serial Output and Windows software
- 4-20mA Output
- Adjustable Sensitivity
|
|
Stingray Portable Open Channel Flow Logger
A new, portable logger for area-velocity flow surveys in sewers, open pipes and channels. Stingray is designed for municipal stormwater, combined effluent, raw sewage, irrigation water and stream flow.
Stingray uses a submerged ultrasonic sensor to measure both Velocity and Level in the channel. It is mounted in the channel with a stainless steel bracket or a pipe band. No calibration is required. It operates up to 4 years powered by standard Alkaline D-cell batteries. Electronics are housed in a watertight IP67 enclosure and rated for operation from –15° to 60°C.
Each Stingray includes Greyline Logger software to retrieve and display logged data by RS232 or modem connection. The software calculates flow for round, rectangular, trapezoid and egg shaped channels plus flumes and weirs. After the data is downloaded, the software automatically creates a flow chart based on the pipe or channel size. The software displays it as a graph or a table, or you can export it to a spreadsheet program.
|
|
AVFM-II Area-Velocity Flow Meter
Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for stormwater, combined effluent, raw sewage, irrigation water and streams.
The AVFM-II uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor is a completely sealed ultrasonic unit with no orifices or ports. It mounts inside a pipe or at the bottom of a rectangular, trapezoid or egg-shaped channel. Calibration is simple: enter the pipe diameter or channel width and the AVFM-II computes the flow volume and displays the flow rate.
- For Open Channels and Pipes
- Ultrasonic - Measures Velocity + Level to Calculate Flow
- No Flume or Weir required
- 3 Isolated 4-20mA Outputs (Flow, Level and Velocity)
- Totalizer and 2 Programmable Control Relays
- Simple 3-key Calibration - Password Protected
- Optional Intrinsically Safe Sensor
- Optional built-in 50,000 point Data Logger and Software
|
|
|
The Dynasonics Series 902 portable ultrasonic flowmeter is an excellent tool for measuring liquids containing 25 ppm or more suspended solids or aeration. The instrument also features a 4-20 mA output, rechargeable battery (8 hours continuous operation), and two-line display of rate and total. For full pipes of 1" (25 mm) to 120" (3050 mm) diameter.
|
|
|
Dynasonics manufactures transit time and Doppler ultrasonic flow meters, in fixed-position, portable and multi-channel versions. These meters are totally non-invasive and easy to install and operate. For clean or dirty liquids, Dynasonics products provide high accuracy measurements on a wide range of pipe materials, diameters and temperatures.
|
|
The UFM 3030 is the universal meter for almost all applications to measure liquids in the chemical and petrochemical, oil production and refining, water and wastewater industry.
|
|
FLUXUS® ADM 8027 is an ultrasonic flowmeter with IP66 enclosure for permanent installation in explosion-hazardous areas. It is ATEX certified for use in explosion hazard zones 1 and 2. All electronic components are in a flameproof enclosure. Terminals and terminal boxes are designed in protection type "increased safety".
|
|
The battery-powered ultrasonic flowmeter FLUXUS® F601 is an ideal tool for service work and quick control measurements. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption.
The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. Transducers are available for pipe diameters from 6 mm to 6500 mm and for temperatures ranging from -40°C to 400°C (more). Two pairs of transducers usually are enough to realize all standard industrial applications. FLUXUS F601 is thus highly flexible and can be used on the most various applications on totally different measuring points.
FLUXUS® F601 has been engineered for the harsh conditions of industrial installations. Its housing is water and dust tight and resistant against oil, many liquids and dirt. The meter and its many accessories are delivered in a sturdy waterproof transport case which dimensions fulfil the airline requirements for carry-on luggage.
Thanks to advanced battery management and Lithium ions battery, F601 allows for more than 14 hours of battery-powered measurement. The remaining battery capacity is displayed and helps planning measuring campaigns realistically.
Beside the standard version, F601 can also be delivered with a wider range of signal inputs and outputs (Multifunctional version), as well as in the Energy version with high precision temperature probes making the energy measurement more powerful than ever.
|
|
|
The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available.
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
Portable ultrasonic flowmeter FLUXUS F601 is ideal for troubleshooting, plant optimisation and for control of permanent meters.
Features
* Wide application range thanks to the ability of the transmitter to work with shear wave AND lamb wave transducers at all frequencies
* A single pair of shear wave transducers fits a wide pipe diameter range
* Rapid installation without process interruption
* Bi-directional measurement
* High measurement dynamics
The FLUXUS ® G ultrasonic flowmeters use the proven "clamp-on" technology. The flow transducers are simply clamped onto the outside of the pipe. The measurement can hence be put into operation without cutting into the pipe and without production stop. The installation costs are low, retrofitting is not a problem.
Since the transducers are not in contact with the gas, there is no possibility of chemical attack. There are no moving mechanical or pressure loaded parts and thus no wear an tear. FLUXUS G is ideal for measurements at high pressures or on lines with pressure peaks.
Two transducer types for a uniquely wide application range
All FLUXUS® G transmitters support both lamb wave and shear wave transducers at all transducer frequencies. In this way the measuring system can be optimized to even the most demanding applications.
The Lamb wave transducers are ideal for measurement at high flow velocities, in natural gas pipelines for example, or at low pressures, amongst others in compressed air circuits. The shear wave transducers cover a wide range of pipe diameters and wall thicknesses. They are the best choice for mobile measurement or for high pressure systems.
|
|
The FLUXUS F601 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
Fuji
Fuji PortaflowX and TimeDelta are multi-use flowmeters for liquid media. Particular advantage: The clamp-on mounting of the ultrasonic sensors, so that any cutting of the pipe is unnecessary and pressure loss can be avoided. The clamp-on measurement is available either as a portable, battery run version, or as a non-withdrawable type. The handling of the PortaflowX is very simple. The user interface of the big graphical display is compatible to the Windows system, so that even inexperienced users can handle it without problems. The PortaflowX speaks four languages fluently and can be delivered optionally with an integrated printer, that can be used either for printing parameters or as a line recorder.
The TimeDelta can convince as well by its easy handling, its enlarged options for diagnosis and analysis and its particular measurement stability, even under difficult conditions. Due to the highly efficient 32bit technology and modern DSP-technique, PortaflowX and TimeDelta can be run under operating conditions, that until now have been considered as impossible for the clamp-on ultrasonic measurement.
|
|
|
DFX Ultrasonic Doppler Flow Meters measure flow of liquids that contain useful sonic reflectors suspended within the liquid. The DFX flow meter operates by transmitting an ultrasonic sound from its transmitting transducer through the pipe wall into the flowing liquid. The sound will be reflected by the the reflectors and recorded by the receiving transducer. The clamp-on style transducer is also available in small pipe and high temperature options. The DFX also offers an insertion probe transducer for pipe systems that do not permit ultrasound penetration.
|
|
Hot Tap provides accurate flow rate measurement in full and pressurized pipe applications in pipes 18" (460 mm) diameter or larger.
Hot Tap combines ADFM pulse Doppler velocity profiling technology with a unique sensor assembly suitable for insertion into full, operating 18” and larger diameter pipes. It measures flow rate to within ±2% of actual flow rate, even in difficult applications such as installations near bends, short straight runs, near pumps, etc. Applications include:
• Wastewater collection systems
• Combined sewer systems
• Wastewater treatment facilities
• Irrigation canals and channels
• Industrial process
• Stormwater outfalls
|
|
FLUXUS® G709 is an ultrasonic flowmeter for permanent installation in 19" rack systems.
In addition to the flow channels, FLUXUS® G709 can be equipped with up to 4 process inputs. With its wide range of electrical inputs and outputs, it can handle and process a great variety of process parameters.
The integrated flow calculator can perform a standard volume flow or mass flow correction according to ISO 12213-1. The connection of external process pressure and temperature measurements is needed for the calculation.
An extended status display helps the user to judge the measuring situation and current measuring precision directly during the measurement.
|
|
The solution for extreme temperatures
The WaveInjector® enables flow measurement at both very low and very high temperatures (400°C), even in explosion-hazard areas. It offers you the well known advantage of the clamp-on ultrasonic technology: a non-invasive, pressure and medium independant measurement with a high dynamic range and a high flexibility.
No special transducers are needed for the high-temperature measurement. The standard transducers are simply fixed to the WaveInjector®. For very large pipes, a special WaveInjector® version with chains guarantees a robust fixation on the pipe and a high surface pressure on the coupling point.
|
|
Electonic Flow Switch for flow monitoring with ultrasonic sensor, digital display, 2 set points and analog output, linearity error 2,5% m.v.
Features:
7-segment LED dispaly, microprocessor-controlled, self monitoring with error display. All prameteers are configured by keypad, tamper proof, keypad lock, rugged construction, vibration- and shock-proof, long term stability
Applications:
OEM-applications, automotive, automobile industry, cooling
|
|
The FLUXUS ® ADM 5107 ultrasonic flowmeter for permanent installation was designed for the water- and wastewater industry.
The watertight transducers are small and practical, fast to install They are watertight and equipped with fixed transducer wiring. On request, the instrument can be pre-configured at the factory so as to reduce commissioning work to a minimum. Thanks to the clamp-on technology, no cutting or welding work is needed to mount the transducers on the pipe.
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
deltawave Ultrasonic flowmeter
Our new measuring system deltawave is not only a precise flowmeter for open channels,filles and partially filled pipes but also a temperatur meter and a flow profile analysis tool. Due to the unique patent pending signal analysis deltawave works under extreme conditions, maintenance-free, calibration-free and reliably. The measurement system monitors itself continously and the multi-channel property ensures redundant safety. With only one deltawave, you can realize up to four independent measurement sites, significantly reducing the equipment cost. This feature, combined with the high accuracy up to 0.5% makes deltawave to one of the most powerful measuring systems.
Because of the high accuracy, field acceptance tests of hydraulic turbines, storage pumps and pump-turbines are possible due to ISO60041 and ASME PTC 18. Accuracies up to 1% could be achieved in open channels without calibration. In filled pipes or channels you will get an accuracy of 0.5% of reading. But measuring with deltawave do not means only accuracy. The optimized transducers ensures long-term stable measuring without maintenance. This has been proven successfully by public authorities.
|
|
The FLUXUS® ADM 8127 ultrasonic flowmeter was specially designed for offshore applications. Its housing is made entirely of stainless steel. It is seawater-proof and ATEX approved for use in explosive atmosphere zones 1 and 2. All electronic components are in a flameproof enclosure with protection degree IP66. Terminals and terminal boxes are designed with protection type Ex-e "increased safety".
|
|
|
|
