Flow meters

Volumetric flow rate: 21.24 m³/h - 11,326.74 m³/h
Process temperature: -18 °C - 121 °C
Process pressure: 34, 10 bar

... Wastewater treatment aeration control Burner and furnace air flow control HVAC duct/damper control Blower and dryer air flow control Lake, pond and aquaculture aeration Compressed ...

Process temperature: -18 °C - 121 °C
Process pressure: 34, 10 bar
Precision: 0.5, 1, 2 %

... compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving ...

Volumetric flow rate: 5.13 m³/h - 951.57 m³/h
Process temperature: -18 °C - 121 °C
Process pressure: 16.5, 41 bar

... The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters ...

Volumetric flow rate: 0.6 l/min - 10 l/min
Process temperature: 0 °C - 100 °C
Process pressure: 10 bar

... A drinks dispensing flow device for low viscosity liquids, the Titan beverage flowmeter is designed specifically as a flow measurement solution for the drink dispensing industries including coffee, beer, ...

Volumetric flow rate: 0.03 m³/h - 0.6 m³/h
Process temperature: 0 °C - 50 °C
Precision: 0.5 %

... Overview
Atrato® Ultrasonic Beverage Flow Meters are the latest addition to Titan’s Atrato® range of inline ultrasonic flowmeters. Designed primarily for the drink dispensing industries, these ...

Volumetric flow rate: 0 l/min - 20 l/min
Process temperature: -20 °C - 110 °C
Process pressure: 30, 10 bar

... ultrasonic flowmeters, now with ASCII streaming, utilise Titan’s patented technology that enables the Atrato to operate with excellent accuracy over very wide flow ranges. The Atrato ultrasonic flow meter ...

Volumetric flow rate: 0.6 l/h - 600 l/h
Process temperature: -10 °C - 60 °C
Process pressure: 10 bar

... Technical Data Service: gas & liquid Wetted parts material: Body-Polycarbonate (PC); O-Ring-NBR (standard); Float-SS316, POM Plastic Connection material: Stainless steel Connection size: 1/8"NPT female; and female 1/4"NPT, R1/4", G1/4" available Pressure ...

Volumetric flow rate: 4 l/h - 200,000 l/h
Process temperature: -50 °C - 200 °C
Precision: 2 %

... Technical Data BF300E for high flows of gas, liquid and steam Case Material: SS316 Body wetted parts: SS316, Others on request. Indication via magnetic coupling (no sealed) Scales calibrated: in l/h, m3/h, kg/h, %, etc.. Flow ...

Volumetric flow rate: 0 l/h - 1,000 l/h
Process temperature: -24 °C - 54 °C
Process pressure: 10 bar

... Technical Data Service: gas & liquid Wetted parts material: Body- Acrylic Plastic O-ring— NBR (standard), Viton on request Float- SS316, Glass, POM Plastic Connection material: Stainless steel Connection size: 1/8"NPT female Temperature & pressure ...

... The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor. Thanks ...

Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar

... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD Electromagnetic Flow ...

Process temperature: -20 °C - 60 °C
Precision: 2.5 %

... are dispersed is proportional to the flow rate of the liquid. Hence, the flow rate of the liquid is derived. Features EPU Clamp-On Ultrasonic Flowmeter 。No intrusion in the pipeline during measurement ...

Process temperature: -156 °C - 60 °C
Process pressure: 10 bar
Repeatibility: 0.4 %

... Description EPR Paddle Wheel Flow Meter, Water Flow Meter Paddle wheel flowmeter mainly by using the principle of rotating blades to measure flow. Mainly by the ...

Process pressure: 0 Pa - 1,500 Pa

... The venturi tube is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube described here is especially designed for air flow metering ...

Volumetric flow rate: 0 m³/h - 3,800 m³/h
Process temperature: 0 °C - 80 °C
Process pressure: 0 Pa - 1,500 Pa

... The venturi tube is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube described here is especially designed for air flow metering ...

... transmitters of DA2000er series: • Large analog display (270 °) – Scale length 250 mm • Scale in m³ / h • Different limit indicator • Analog outputs 0 … 10 V or 4 … 20 mA possible (linear or square root) • Combination with a pressure ...

Volumetric flow rate: 0.1 l/min - 120 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 30 bar

... Custom stairs The Flowmeter FLUP have high visibility on each side and a clear reading of the scale. Thanks to the conformation of the cone, at regular increases of flowrate match movements equally regular of the shutter Threaded ...

Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 0.2 bar - 2 bar

... Built upon proven TSI flow sensor technology, the NEW 5000 Series Flow Multi- Meter redefines what a flow meter can do for you. This all-in-one gas mass flow meter ...

... MASS FLOW METER 4040 SKU: 4040 Range: 0-300 L/min. Calibration: Air, O2, N2. Connection: 22 mm ISO. $1095.00 USD PRODUCT DETAILS Whether measuring gas flows in a laboratory, hospital or clinic, or manufacturing ...

... The TSI Mass Flowmeter 4043 (LCD, 0-200L/min Air, O 2 , N 2 1/2" tube) can be used for a multitude of gas flow measurement applications. Whether measuring gas flows in a laboratory or ...

... Type of monitoring: Digital flow indicator with adjustable switching points Number of switching points: max. 2 or corridor monitoring Display range for KUZ-D/F/XH: 0.0 ... 7.0 l/min Display range for ...

Volumetric flow rate: 0.1 l/min - 7 l/min
Process pressure: 0 bar - 63 bar

... Volume flow meter with throttle and bypass Medium: oil Number of outlets: 2 … 22 ...

Volumetric flow rate: 1 l/min - 50 l/min
Process pressure: 0 bar - 25 bar

... Volume flow meter with throttle and bypass Medium: oil Volume flow in l/min: 1 … 50 Permissible operating pressure in bar: 25 Number of outlets: 1 ...

Process temperature: -30 °C - 80 °C

... cycle operation for self-sufficient systems Flow metering at the highest technical level The NivuFlow 750 flow meter is the successor to the well-known OCM Pro CF. Compact dimensions of the flowmeter ...

Process temperature: -20 °C - 70 °C

... as in low flow level circumstances -IoT-ready with global 4G connectivity for highest availability and digital services Hybrid Flow Measurement NivuFlow 7550 is a hybrid measurement system which was particularly ...

Process temperature: -20 °C - 70 °C

... operation for self-sufficient systems Contactless Radar Flow Metering The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic ...

Process temperature: -50 °C - 180 °C
Process pressure: 0 Pa - 4,000,000 Pa

... The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ...

Volumetric flow rate: 0.1 l/min - 10 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 10 bar

... 7 segment flow rate indication Standardised button programming Can be used for water/glycol mixtures Flow and temperature monitoring ...

Volumetric flow rate: 0.1 l/min - 10 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 20 bar

... 7 segment flow rate indication Standardised button programming Can be used for water/glycol mixtures Flow and temperature monitoring ...

Volumetric flow rate: 0.2 l/min - 80 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 10 bar

... Flow rate sensor with amplifier Magnetic-inductive measuring principle Flow indication with bright red 3-digit 7 segment indication Set-up via buttons at the device ...

Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 10, 64, 100 bar

... EL- FLOW® Prestige, the latest generation thermal mass flow meters and controllers for gases, represents a truly ground-breaking shift in versatility and user-friendliness. Its principal customer benefits ...

Volumetric flow rate: 0.1 l/min - 1,670 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 400, 200, 100, 64 bar

... EL- FLOW® Select series Mass Flow Meters/Controllers are thermal mass flow meters of modular construction with a ‘laboratory style’ pc-board housing. Control valves can ...

Volumetric flow rate: 0.1 l/min - 50 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 1,000, 1,500 psi

... as well as other high purity gas applications. The base blocks of the Mass Flow Meters and Controllers have 1/4" face seal male (VCR) connections. Metal Sealed Mass Flow Meter/Controller ...

Volumetric flow rate: 0 l/min - 700 l/min
Process temperature: -60 °C - 210 °C
Process pressure: 0 bar - 400 bar

... Consisting of two high-precision gears, the measuring unit is driven by the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The bearing consists of ball and plain ...

Volumetric flow rate: 0 l/min - 200 l/min
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 240 bar

... the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The bearing consists of ball and plain bearings. The measuring principle does not cause any pressure or volume ...

Volumetric flow rate: 0.4 l/min - 3,750 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 480 bar

... screw spindles with rolling-element bearings for low friction. The liquid flow makes the spindles rotate (displacement principle) and runs through the device in axial direction. Flow in and out takes place without ...

Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar

... VSI+ flowmeters measure the volume flow of the medium according to the gearwheel
principle. A gearwheel pair fitted very precisely in the housing forms the measuring
unit. The rotation of the measuring unit ...

Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar

... Our VS gear flow meters offer unbeatable performance, linearity and resolution for most accurate measurement of clear, viscous liquids according to the gearwheel principle. A gearwheel pair adapted with precision into ...

Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar

... Our RS helical screw flow meters impress with a low-resistance, pulsation-free and high-precision measurement of the fluid with minimal shear, low pressure losses and maximum functionality thanks to intelligent sensor ...

... Product Description Airflow meter for extruders Art.-Nr. 01023 ...

Process temperature: 0 °C - 60 °C

... >AI.C-SONIC is the cutting-edge solution for measuring water flow in small pipes. Thanks to "transit time" ultrasonic technology, this instrument allows precise flow monitoring without cutting pipes or ...

Process temperature: -40 °C - 130 °C
Precision: 1 %

... battery that provides up to 16 hours of continuous operation, all stored in a sturdy aluminum carrying case.

Main Technical Specifications
Accuracy: ±1% of the measured value
Flow Range: ...

Process temperature: -30 °C - 160 °C
Precision: 1 %

... the ultimate professional solution for precise liquid flow measurement in closed ducts. Based on transit-time ultrasonic technology, this system ensures accurate measurements without interrupting flow or cutting pipes, ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

... series clamp-on ultrasonic flow sensors/ flow meters are compact in size, enabling efficient flow measurement and output without external circuitry. They can be easily clamped onto flexible ...

Volumetric flow rate: 0 l/min - 12 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

... Overview
The CM series clamp-on ultrasonic flow sensors / flow meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid flow ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

... /strong>
The CM series clamp-on flow sensors/ flow meters are similar to CG series sensors/ flow meters in basic structure and function. The major difference is that ...

Volumetric flow rate: 0.015 l/min - 83 l/min
Process temperature: -40 °C - 80 °C
Process pressure: 200, 50 bar

... Designed for precise flow measurement, the volumetric flow meter is suitable for continuous or intermittent monitoring of liquid flow or instantaneous flow in pipelines. ...

Process pressure: 3 bar

... Non-intrusive installation, no pipeline modification, on-site configuration via menu
https://www.genndih.com/ Flow- Meter/Ultrasonic- Flow- Meter
...

Mass flow rate: 1 kg/h - 20,000 kg/h
Process temperature: -20 °C - 450 °C
Process pressure: 6, 30 bar

... Microwave-based flow measurement for bulk solids MF 3000 Numerous bulk material applications require continuous measurement of mass flow, e.g. for exact dosing of a material or to ...

Precision: 0.3 %

... Product overview

• EFM water monitoring system from E&E Solutions Pvt. Ltd for continuous online monitoring of industrial water parameters.
• Designed to provide real‑time data to plant control and water management

Process temperature: 5 °C - 55 °C
Process pressure: 0.3 bar - 16 bar
Precision: 2 %

... Product Overview
Ultrasonic Flow meter EE-UWFM-DNX is an advanced inline ultrasonic water flow meter designed for real-time water management. It addresses the challenges of rising water costs ...

Volumetric flow rate: 2.12 l/min - 4,121,766.82 l/min
Process temperature: -20 °C - 180 °C
Precision: 2 %

...

• Can this meter be used in industries with high-flow water systems? Yes, it is designed for high-flow water systems and provides accurate measurements in industrial environments.
• Does

Process temperature: -4 °C - 45 °C

... of the flow profile. Versatile: The StreamPro can be used in very shallow waters from about 0.1-2 m. There is the option of extending the measuring range to 6 m. Mobile flow measurements at low to moderate suspended ...

Process temperature: -5 °C - 45 °C

... varies depending on the water depth. With the help of the supplied Software WinRiver II all relevant information ( flow profile, current flow, etc.) are provided to the user in a clear form. ...

Process temperature: -5 °C - 45 °C

... relevant information ( flow profile, current flow, etc.) are provided to the user in a clear form. Optimised equipment rack: The RiverPro trimaran has a particularly favourable flow design, which is beneficial ...

... Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including bubbler, non contact laser area velocity, submerged Doppler ultrasonic ...

Process temperature: -40 °C - 120 °C
Precision: 1 %
Repeatibility: 0.25 %

... transit-time flow meter for pipes and ducts. It combines a DSP-based processing unit with up to four speed transducers. The meter measures the difference in transit time between ultrasonic pulses sent ...

Precision: 1 %
Repeatibility: 0.2 %

... transit-time flow meter for measuring flow in pipes and ducts. It comprises an advanced DSP-based processing unit and up to four velocity transducers. Ultrasonic pulses are transmitted upstream→downstream ...

Process temperature: -40 °C - 120 °C
Precision: 0.5 %
Repeatibility: 0.15 %

... recordings and transfer to external systems.

Measurement / Detection / Technology
Measurement: Flow / Flow rate
Detection: Flow / flow rate
Technology: Transit-time ...

Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar

... Electromagnetic Flow meter does not have any moving parts, ideal for wastewater applications or any dirty liquids which is conductive or water based, or for applications where low-pressure drop and low maintenance are ...

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %

... The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Application ...

Process temperature: -30 °C - 80 °C
Precision: 2, 1 %

... solution for monitoring the flow or velocity of open channels, agricultural irrigation or groundwater. the best solution. Application : ● Open channel flow rate or flow monitoring (Parshall trough, ...