Other milling machines

This equipment is designed for 8-inch and above chip sealing and testing plants, and is applied to low-k wafers and silicon-based Gan wafers with 40nm and below in the semiconductor industry. • High quality Use ultra short pulse processing ...

X travel: 762 mm
Y travel: 406 mm
Z travel: 508 mm

Every VF Series vertical machining center provides outstanding features at an excellent price, and features a wide range of available options to customize your machine to your exact needs. The VF-2 is our most popular model, and the workhorse ...

X travel: 762 mm
Y travel: 508 mm
Z travel: 508 mm

5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. ...

X travel: 3,683 mm
Y travel: 2,223 mm
Z travel: 1,000 mm

The GM-2-5AX is a 5-axis gantry mill designed for complex, large-part machining, such as airframe components, layup molds, and composite structures. The machine’s rigid steel construction provides a very stable cutting platform, and a ...

X travel: 7,160, 4,160, 7,000, 4,000 mm
Y travel: 300, 250 mm
Z travel: 250, 270 mm

CNC Machining centre with 4 controlled axes The FMC SERIES 4 latest generation machining centres with 4 controlled axes have been designed to carry out drilling and milling operations on aluminium or steel profiles. The characteristic ...

X travel: 4,160, 4,000, 7,158, 7,000 mm
Rotational speed: 20,000 rpm
Power: 7 kW

CNC Machining centre with 4 controlled axes The FMC 340 latest generation machining centre with 4 controlled axes has been designed to carry out drilling and milling operations on aluminium or steel profiles. The characteristic design ...

X travel: 7,945 mm - 15,445 mm
Y travel: 580 mm
Z travel: 400 mm

Machining centre with 5 interpolating axes for machining on 5 faces of aluminium profiles with a cross-section of 580 x 400 mm and steel tubes up to 5 mm thick. HSK E63 22 KW 24000 rpm liquid-cooled electrospindle allows the production ...

VFT-orbit-2 is the world’s fastest, most robust and easiest to service lens generator. This free form lens generator raises the bar that Satisloh’s flagship VFT-orbit set. The fully automated lens surfacing machine features exceptional ...

VFT-orbit-2E is an economical entry into automated Rx lens generating for mid volume production. In addition, the surfacing machine is available as automated or manual. Economically priced free form lens generator VFT-orbit-2E is ...

VFT-macro is a manual, Rx free form lens generator for low to mid volume production. It features VFT technology and auto-calibration. Digital Rx lens production for low to mid volume operations The manual compact Rx lens generator ...

X travel: 650 mm
Y travel: 550 mm
Z travel: 550 mm

The Vector series is the compact all-in-one machining solution, designed and preconfigured for complex manufacturing challenges. The machines are designed using the latest FEM analysis software. The production takes place under strict ...

X travel: 850 mm
Y travel: 550 mm
Z travel: 550 mm

The Vector series is the compact all-in-one machining solution, designed and preconfigured for complex manufacturing challenges. The machines are designed using the latest FEM analysis software. The production takes place under strict ...

X travel: 1,000 mm
Y travel: 550 mm
Z travel: 550 mm

The Vector series is the compact all-in-one machining solution, designed and preconfigured for complex manufacturing challenges. The machines are designed using the latest FEM analysis software. The production takes place under strict ...

X travel: 310, 610 mm
Y travel: 250 mm - 1,060 mm
Z travel: 120 mm

Designed for fine, precise, intensive works in small formats, the CharlyDMCII milling machines are used for many applications: metal engraving, fine machining, plasturgy, design, rapid prototyping, electronics… STRENGTHS Rigid steel/cast ...

Rotational speed: 60,000 rpm
Power: 500 W

Milling/grinding machines for dental prostheses available in versions 4 and 5 positioned axes, perfect for a simple and fast daily production of prostheses in soft materials and ceramics, with dry or lubricate tool. hanks to their ...

Rotational speed: 60,000 rpm
Power: 500, 980 W

Machining machines for dental prostheses in 5 positioned axes, ideal for a simple and fast daily production of prostheses in soft and ceramic materials, dry or with lubricated tool. Very compact in size thanks to the original choice ...

Diameter: 430 mm
Spindle speed: 7,000 rpm
Maximum part length: 480 mm

EMCONNECT – Digital Process Assistant (Sinumerik ONE) Automation with EMCO bar loader, swing loader or gantry loader Driven tools on both turrets Siemens or Fanuc control Highlights Spacious Work Area Fanuc 31iB with ...

Diameter: 840 mm
Spindle speed: 2,500, 2,000, 3,500 rpm
Maximum part length: 3,500, 1,500, 2,500 mm

Main spindle with 3 bed lengths up to 3500 mm Sinumerik ONE control Y axis directly implemented in machine construction Steady rest for the machining of shafts Highlights High thermostability and precise machining High ...

Diameter: 700 mm
Spindle speed: 3,500, 2,500 rpm
Maximum part length: 1,300 mm

Main spindle with spindle connection KK8 Y-axis directly integrated into the machine Highlights High thermostability and precise machining Very stable Y axis with long travel High-precision C axis State-of-the-art control ...

X travel: 1,524 mm
Y travel: 660 mm
Z travel: 610 mm

TABLE Spindle nose – table (mm) - 102 - 711 Table working surface W x D (mm) - 1.680 x 660 T-Slots (DIN 650) - 6 x 18 H8 x 100 AUTOMATIC TOOL CHANGER Tool length max. (mm) - 300 FURTHER DETAILS Content coolant tank (l) - 894 Scraper ...

X travel: 3,200 mm
Y travel: 2,100 mm
Z travel: 900 mm

TRAVELS B-Axis (°) - +100 / -110 C-Axis (°) - ±360 TABLE Spindle nose – table (mm) - 66 - 966 Table working surface W x D (mm) - 3000 x 1700 T-Slots (DIN 650) - 7 x 22 H8 x 220 SPINDLE Spindle Torque max. (Nm) - 106 FEEDRATES Rapid ...

Diameter: 336 mm
Spindle speed: 4,500 rpm
Bar capacity: 40 mm

TRAVELS Y-Axis (mm) - +/- 55 W-Axis (mm) - 640 MACHINE CAPACITY Max. swing over bed (mm) - 508 SPINDLE Chuck diameter (mm)-210 Draw Tube Diameter (mm)-64,5 Live Tools Spindle Speed max. (rpm)-5.000 Spindle Power (kW)-6,3 Spindle ...

X travel: 550 mm
Y travel: 400 mm
Z travel: 400 mm

FEHLMANN PICOMAX 550 PRO - new CNC machine for modern 5-axis machining. Compact, universally applicable and user-friendly - quality that makes a difference. The PICOMAX 550 PRO offers an economical and technologically advanced solution ...

X travel: 650 mm
Y travel: 800 mm
Z travel: 500 mm

For 5-sided and 5-axis machining - with the VERSA 945, workpieces up to Ø 650 mm can be precisely machined in 5 axes. The largest machine in the VERSA family also combines the latest technology with proven features. The rotary tilting ...

X travel: 650 mm
Y travel: 800 mm
Z travel: 500 mm

Highest level of precision and dynamics This 3-axis machining center with a fixed table offers a generously-sized clamping area of 870 x 760 mm. Workpieces up to 1000 kg can be machined with high precision and dynamics. The VERSA 943 ...

X travel: 8,000 mm
Y travel: 515 mm
Z travel: 370 mm

GARNET 5X, a 5-axis CNC machining center offers a remedy in wide range of its users by processing aluminium profiles in different measures through spindle which makes process in each aspect between 0° / 360° angles in axis B, 0° / 180° ...

Used for end milling processes of aluminum and plastic profiles. • Hydro-Pneumatic motion • Pneumatic vertical and horizontal clamps • Secure operation by the cover equipped with a safety sensor • Automatic returning to process ...

X travel: 6,000, 4,000 mm
Y travel: 340 mm
Z travel: 255 mm

Thanks to its spindle which can operate in -90˚ / +90˚ fixed angles, the 4 axis CNC machining center, GARNET XS4 can process different sizes of aluminum and PVC profiles and offer a wide spectrum of solutions to the user. The machine ...

X travel: 800 mm
Y travel: 450 mm
Z travel: 465 mm

Make use of your com­pe­ti­ti­ve advan­ta­ges! The 5-axis machi­ning cen­ter HSTM with hori­zon­tal com­po­nent ori­en­ta­ti­on is par­ti­cu­lar­ly sui­ta­ble for the machi­ning of tur­bi­ne and com­pres­sor blades, blisks/impellers and/or ...

X travel: 930 mm - 2,400 mm
Y travel: 400, 240, 700 mm
Z travel: 830, 570, 400 mm

Make use of your com­pe­ti­ti­ve advan­ta­ges! The 5-axis machi­ning cen­ter HSTM with hori­zon­tal com­po­nent ori­en­ta­ti­on is par­ti­cu­lar­ly sui­ta­ble for the machi­ning of tur­bi­ne and com­pres­sor blades, blisks/impellers and/or ...

X travel: 600 mm
Y travel: 150 mm
Z travel: 395 mm

Make use of your com­pe­ti­ti­ve advan­ta­ges! The 5-axis machi­ning cen­ter HSTM with hori­zon­tal com­po­nent ori­en­ta­ti­on is par­ti­cu­lar­ly sui­ta­ble for the machi­ning of tur­bi­ne and com­pres­sor blades, blisks/impellers and/or ...

SERIES IMG 1010 FOR MICROMACHINING Small CNC Machine The iMG 1010 offers a compact solution for machining workpieces up to 100x100x100 mm. The machine enables a wide range of materials such as aluminum, CoCr or titanium to be machined ...

DESCIPTION Our BEM 3, with pneumatic feed and integrated hydraulic regulation, has been specifically designed for precise drilling work and is ideal for industrial applications requiring high precision and efficiency. TECHNICAL ...

DESCRIPTION Our BEM 6, with pneumatic feed and integrated hydraulic regulation, has been specifically designed for precise drilling work and is ideal for industrial applications requiring high precision and efficiency. TECHNICAL ...

DESCRIPTION Our BEM 6D, with pneumatic feed and integrated hydraulic regulation, has been specifically designed for precise drilling work and is ideal for industrial applications requiring high precision and efficiency. TECHNICAL ...

X travel: 1,000 mm
Y travel: 1,100 mm
Z travel: 750 mm

Machining centre C 52 The C 52 is intended for the simultaneous 5-axis machining of workpieces weighing up to 2000 kg - with unbeatable accuracy and precision. Parameters that always represent a challenge for the machine dynamics. HERMLE ...

X travel: 1,200 mm
Y travel: 1,300 mm
Z travel: 900 mm

Machining Centre C 62 The C 62 is a highly dynamic machining centre designed for 5-axis/5-side machining. Numerous features ensure high-precision and cost-effective working on workpieces up to 2500 kg in weight. Various optional extras ...

X travel: 600 mm
Y travel: 550 mm
Z travel: 450 mm

Machining centre C 250 Within the HERMLE range of models, the C 250 is an entry-level model into the world of 5-axis & 5-sided machining. Nevertheless, the “large” models are in no way inferior. Thanks to the large swivelling range of ...

X travel: 7,120 mm
Y travel: 350 mm
Z travel: 200 mm

AIM 7510 is 5-axis servo-controlled machining centers which are is designed to perform drilling, grooving, notching, taping, saw milling, etc. on all kinds of aluminium & PVC profiles, light alloys in general and thin walled steel profiles. ...

X travel: 4,100 mm
Y travel: 2,000 mm
Z travel: 40 mm

Composite Panel Processing Machine 2.000 x 4.100 mm Net Machining Capacity, CNC Controller, 400V General Features : S1 spindle max. power (kW): 7.5 S6 spindle max. power (kW): 9 Automatic tool change feature Tool capacity ...

Machine which works with hydro-pneumatic system, ideal for the end milling operations on PVC and aluminium profiles precisely STANDART ACCESORIES 1 x pneumatic vertical clamp 1 x pneumatic horizontal clamp Air gun Spare mandrel&shim ...

X travel: 1,615 mm
Y travel: 1,100 mm
Z travel: 650 mm

1.Full direct-drive A/C five-axis cradle turntable, one clamping to complete multi-face machining. 2.240Nm large-torque motorized spindle with a maximum speed of 10,000rpm/min. 3.Applied to the processing of aluminum and iron castings ...

X travel: 6,200, 8,500, 4,200 mm
Y travel: 4,500 mm
Z travel: 1,600 mm

It is suitable for processing oflarge parts, plate parts, disc parts, shell partsmolds and other precision parts. The X-axis is supported by four rolling guide rails, and the Z-axis adopts a squareram structure constrained by four ...

X travel: 6,500, 8,500, 4,000 mm
Y travel: 2,600 mm
Z travel: 1,250, 1,500, 1,000 mm

1.The PHB5D model CNC machining center has capability functions of milling, drillingand tapping. 2.The international CNC numerical control system is adopted.Machining for various lengths of metal profiles, such as aluminum, steel, ...

The BDR 1100 by Protem is a Pipe grooving machine which is used to perform grooving or milling works. This tool can be used for flanges, sheet and workshops. Also, it can work flat or vertical axis. It comes with a clamping system and ...

Diameter: 320 mm - 900 mm
Spindle speed: 0 rpm - 2,000 rpm
Rapids on X: 10 m/min

It cornes with a generous and robust 500 mm wide bench with lengths of up to 6 meters between the tips. The travel of the x axis allows the entire diameter allowed on the bench to be machined with any turret applied. It is placed between ...

X travel: 400 mm
Y travel: 400 mm
Z travel: 150 mm

With excellent product design, ULM-400C generates great ROI with its stable performance in high-speed and high-precision processing for various industries. The integration of Conprofe’s ultrasonic machining technology expands the range ...

X travel: 600 mm
Y travel: 500 mm
Z travel: 300 mm

Intelligent Ultrasonic machining system developed by Conprofe to tackle the challenges in machining hard-to-cut materials Supercritical Carbon Dioxide (ScCO2) Cryogenic Through-Spindle Cooling System and MQL Cooling System available ...

X travel: 600 mm
Y travel: 500 mm
Z travel: 300 mm

Intelligent Ultrasonic machining system developed by Conprofe to tackle the challenges in machining hard-to-cut materials Supercritical Carbon Dioxide (ScCO2) Cryogenic Through-Spindle Cooling System and MQL Cooling System available ...

Semi-automatic threading machine, working out of extrusion line, for PVC, PE, pipes etc. • - Threading by removal of material of both pipe ends (internal thread on one and external thread on the other); • - Threading: o - Whitworth ...

Automatic threading machines for in-line and stand-off operation, suitable for PVC electrical, gas and water pipes (produced in single or double extrusion). Outside threading (through removal of material) simultaneously on both ends; ...

Machines for slotting (or perforation) smooth or corrugated PVC, PE, etc. pipes (to be utilised for the water percolation in wells and drainage or consolidation of the soil). • - Realisation of 1 or more series of parallel slots; on ...

Handy - precise - reliable The relaible grooving machine to cut welding grooves in all different types of floor coverings without dust. • enables to cut grooves along the walls • integrated dust exhaust fan • two levels of cutting ...

Rotational speed: 3,000 rpm - 18,000 rpm

MILLING MACHINE FOR KNIFE HANDLE model "FMC/cnc" he most suitable machine for the mass production of objects milled on three sides like knife handles, flat paintbrush handles and different shapes. The machine has two working positions, ...

Rotational speed: max 11000.0 rpm

CNC ROTATING MILLING MACHINE WITH 13 AXES model "REVO 2.0" This automatic line has been designed for milling shaped knife handles up to 5 different profiles with round, oval and irregular sections. The line is composed of 3 machines ...

Rotational speed: 12,000 rpm - 24,000 rpm

COPYING MILLING MACHINE WITH 4 HEADS model "FBI/2C4T/4X2cnc" The machine is suitable to work knife handles, hacksaw handles, brush and paintbrush handles, etc. It is provided with two working positions, that allow to work two elements ...