Adhesive pumps

Width: 130 mm
Length: 323 mm
Height: 174 mm

... DIAPHRAGM PUMP The 01D140 pneumatic, double diaphragm pump is designed for fluid transfer and small circulating systems with 1:1 ratios. These pumps will deliver high ...

Width: 188 mm
Length: 232 mm
Height: 251 mm

... pneumatic, double diaphragm pump is designed for low-pressure circulating systems with a ratio of 3.5:1. These pumps will deliver high performance and durability. ULTIMATE HIGH PERFORMANCE, COMPACT ...

Flow: 54.6 l/min
Pressure: 180 bar
Fluid temperature: 80 °C

... . Double-acting shovel pumps are specifically designed to transfer fluid with a viscosity greater than 50,000 Cps and operate from 25,000 Cps for products whose particular rheology makes them difficult to pump. ...

Designed to fit large drums or containers, PowerMaster III pump units are ideal for lubrication systems using substantial quantities of lubricant. The modular combination of various air motors with pump ...

Flow: 0.0001 l/min - 0.0245 l/min
Weight: 550, 620 g
Pressure: 0 bar - 6 bar

Progressive Cavity Pumps Continuous volumetric dispensing, independent of fluid viscosity or changes in viscosity over time, gives you a reliable, repeatable process. Nordson EFD’s 797PCP Series pumps ...

Flow: 0.0001 l/min - 0.0245 l/min
Weight: 550, 620 g
Fluid temperature: 10 °C - 40 °C

... 797PCP-2K Series pumps precisely meter accurate ratios of part A and part B materials through static mixers for highly repeatable dispensing with fluid deposit accuracy at +/- 1%. With a modular design that consists ...

Height: 870 mm - 2,600 mm
Flow: 0.6 l/min - 6 l/min
Weight: 17.5 kg - 185 kg

Adhesive pumps for industrial applications Reliable and clean feeding directly from original containers Drum pumps: High performance piston pumps This drum pump ...

For continuous metering of adhesives, sealants and lubricants Gear metering pumps from DOPAG offer all the features that are required in industry today. They meter a wide range of materials, including ...

Flow: 98.4 l/min

ARO 3:1 Ratio High Pressure Pump PH10A-XSS-XXT feature an operating capacity of up to 300 psi due to its dual power engines that control the fluid handling diaphragms. This stall-free machine offers an excellent material ...

Flow: 0 l/min - 4.2 l/min
Weight: 2.2 kg
Pressure: 0 bar - 7 bar

... DX70 Diaphragm Pump Air operated 1:1 ratio diaphragm pump Binks DX70 is the perfect solution for one or two spray gun applications with faster colour changes and quick refills for less production ...

Flow: 0 us gal/min - 22 us gal/min
Weight: 28, 43 lb
Pressure: 0 psi - 125 psi

... aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, paints, ...

Flow: 20 l/min - 170,000 l/min
Pressure: 0 bar - 120 bar
Fluid temperature: 300 °C

CHEMICAL PUMPS [CHEM] -INDIVIDUAL TYPES & DESIGNS Gear pumps for the Chemical industry Gear pumps for chemical applications CHEM gear pump to transport and dose ...

Pressure: 0 bar - 120 bar

Gear pumps with magnetic coupling The magnetic coupling is equal to contact-free drive and seal. Magnetic coupling pumps are used if critical media has to be transported. The seal ensures that the pumps ...

Flow: 20 l/h - 170,000 l/h
Pressure: 0 bar - 120 bar

Chemical pump hydraulically temperature controlled for a wide range of applications. This ranges from organic and inorganic chemicals to food oils, polymers and pharmaceutical products. A wide-ranging modular system provides ...

Flow: 0 l/min - 21 l/min
Head: 40 m
Power: 800 W

Pre-assembled eccentric worm-drive pump kit with planetary gear for industrial applications to pump thin to medium viscous media up to 25.000 mPas out of 200-l drums and IBCs. The positive displacement ...

Flow: 50 l/min
Pressure: 8 bar

... up to max. 50.000 mPas - Residual quantity in the drum: < 1 % - Mobile use, simply transport to the drum - Combination of pump and motor can be individually designed for the material to be pumped (modular design) - ...

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Pressure: 30, 10 bar

ViscoTec dispenser 3VMP15, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Pressure: 30, 10 bar

ViscoTec dispenser 3VMP22, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 0 m³/h - 48 m³/h
Pressure: 0 bar - 7 bar

... multipurpose peripheral flow AODD pump The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of material ...

Flow: 0 m³/h - 30 m³/h
Pressure: 0 bar - 4 bar

Industrial flexible impeller pump for standard and hygienic applications Industrial flexible impeller pump for standard and hygienic applications Polished stainless steel for hygienic applications Industrial ...

Flow: 0 m³/h - 130 m³/h
Pressure: 10, 16 bar

... media TopGear MAG is a range of leak-proof internal gear pumps for low and high viscous liquids which are corrosive, toxic, aggressive or expensive. Total containment of the liquid inside the pump ...

Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C

... plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump sizes, hydrolub® can be configured to suit customers’ specific requirements and therefore, ...

Flow: 2.5 l/min - 265 l/min
Pressure: 200 bar
Fluid temperature: -30 °C - 200 °C

Stainless steel reactor discharge pump for chemical polymer production processes – cinox®-V therminox®-V The pump models cinox®-V therminox®-V are discharge pumps. They have been ...

Width: 45 mm
Length: 140 mm
Height: 65 mm

... technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...

Width: 45 mm
Length: 140 mm
Height: 65 mm

... technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...

Width: 45 mm
Length: 143 mm
Height: 65 mm

... technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

... industrial applications. ASTRAevo is a recent project, conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, reducing at the lowest the maintenance ...

Flow: 0 l/min - 25 l/min
Pressure: 8 bar

... Temperature max: - +110 C Pressure: - 8 bar Description: - Compact and small diaphragm pump in aluminium and cast iron, ideal for installation where it is little space Aluminium ...

Flow: 0 l/min - 30 l/min

... is the biggest pump in the range of powder transfer pumps with a max capacity of approx 30 kg/min. Reduced contamination The powder is transferred in a hermetic system from the powder container to ...

Flow: 0 l/min - 20 l/min

... is the smallest pump in our range of powder transfer pumps with a max capacity of approx 20 kg/min. Reduced contamination The powder is transferred in a hermetic system from the powder container to your ...

Length: 230 mm
Weight: 360 g
Pressure: 0 bar - 20 bar

The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Length: 230 mm
Weight: 360 g
Pressure: 0 bar - 20 bar

The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Length: 230 mm
Weight: 374 g
Pressure: 0 bar - 20 bar

The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Flow: 20 l/min
Pressure: 3 bar - 12 bar

... lt/min Supply Pressure:3-12 bar Pneumatic transfer piston pumps with 1:1 or 2:1 ratio: are perfect for the application of low and medium viscosity vinyl glues. For this application the pump is provided ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar

Application(s) : Multicomponents Specification(s) : I/O on the rear of the pump Technical data Sealing : Lip seals and liquid barrier (16KA) Rotation speed : From 10 to 200 min-1, depending on the product involved Standard ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar

... Clockwise rotation (A) Temperature : Max. 135°C Output pressure : Max. 100 bars Input/Output : 2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar

... Clockwise rotation (A) Temperature : Max. 135°C Output pressure : Max. 100 bars Input/Output : 2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive ...