DCサーボモーター 40AIS83-24-C00330-B1-5-1R

24V永久磁石IP54

Features:• 17-bit/23-bit absolute photoelectric encoder, high-end and highly responsive.• Speed: Excellent high-speed performance, typically reaches a rated speed of 3000 rpm, with a maximum speed of up to 6000 rpm.• Adaptability: Strong overload resistance, can withstand loads up to 3 times the rated torque, especially suitable for applications requiring instantaneous load fluctuations and rapid starts.• Stability: Smooth low-speed operation, no step-out phenomenon like stepper motors during low-speed operation. Ideal for scenarios requiring high-speed response.• Timeliness: Short dynamic response time for motor acceleration and deceleration, usually within tens of milliseconds.• Comfort: Significantly reduced heat and noise.ModelVoltage (VAC)Current (A)Torque (Nm)Weight (kg)Length (mm)MD40AIS83-24-C00330-B1-5-1R24V6.5A0.32 83Motor SpecificationsItemSpecificationWinding Connection MethodStar ConnectionEncoder Type17-bit Absolute EncoderShaft Runout0.025mmRadial Play0.06mm @ 450gAxial Play0.08mm @ 450gMax Radial Load15N @ 20mm from flangeMax Axial Load10NInsulation ClassClass BDielectric Strength500VAC for 1 minuteInsulation ResistanceMin. 100Ω @ 500VDCMotor ParametersMotor ModelMD40AIS83-24-C00330-B1-5-1RRated Voltage (V)24Rated Power (W)100Rated Current (A)6.5Rated Torque (N·m)0.32Peak Torque (N·m)0.64Rated Speed (rpm)3000 ± 10%Max Speed (rpm)3200 ± 10%Winding Resistance (Ω)0.6 ± 10%Line Inductance (mH)0.4 ± 20%Torque Constant (N·m/A)0.05Length (mm)83Number of Pole Pairs5Protection ClassClass FMotor Insulation ClassIP54Wiring DefinitionTerminalNameFunctionCN11GND - DC power ground (For DC24–48V power supply. Reversing the positive and negative poles will damage the driver.)2DC+ - Positive pole of DC power supply1PULSE+ - Positive terminal of command pulse2PULSE– - Negative terminal of command pulse (DC5–24V self-adaptation)3DIR+ - Positive terminal of command direction4DIR– - Negative terminal of command directionCN57D01+ - Output terminal 01 (function depends on user I/O setting)8D01–5Di1 - Input terminal 016DIC - Common terminal of input terminals, used to drive the input optocoupler. Connect to DC12–24V (common–anode NPN connection) or 0V (common–cathode PNP connection), current ≥ 100mA9485A - Positive terminal of 485 communication10485B/T - Negative terminal of 485 communication11GND - Communication common ground12CLK - Clock line for program upgrade13DIO - Data line for program upgrade14+3.3V - 3.3V power supply for communicationOutline DrawingCategory: Integrated DC Servo Motor and DriverTag: AC Servo Motor and DriverTechnical Specifications:Model: MD40AIS83-24-C00330-B1-5-1RRated Voltage: 24VRated Power: 100WRated Current: 6.5ARated Torque: 0.32 N·mPeak Torque: 0.64 N·mRated Speed: 3000 ± 10% rpmMax Speed: 3200 ± 10% rpmWinding Resistance: 0.6 ± 10% ΩLine Inductance: 0.4 ± 20% mHTorque Constant: 0.05 N·m/ALength: 83mmNumber of Pole Pairs: 5Protection Class: FInsulation Class: IP54