Power meter with power quality and harmonic analyzer MAE-96 series

energy metermultimeterreactive power

Flush-mount measurement unit for Rogowski coils or 1/5A CTs. The MAE-96 units measure the main electrical quantities of a three-phase circuit. Data can be viewed locally on the LCD display or remotely via Modbus communication. The combination of Rogowski coils with the MAE-96V unit facilitates integration into high-power switchboards. - Electrical: The MAE-96x unit measures single-phase, three-phase networks with or without neutral. Auxiliary power supply 85-270V AC. Depending on the model, the measurement unit can be associated with Rogowski coils (mV signal) or current transformers with 1A or 5A secondary. Accuracy: 0.5% for active energy and 0.2% for instantaneous measurements. - Communication: 2 fully programmable pulse emitters and RS485 Modbus port. - Physical: The MAE-96 measurement unit is flush-mounted on a cabinet door or electrical panel, in a 92×92 mm cutout. Case dimensions: 96×96 mm, depth 70.7 mm. Backlit LCD display. Connection via pluggable screw terminals. - Measured data: The measurement unit measures and displays the following electrical data: – Instantaneous measurements: phase-to-neutral and phase-to-phase voltages, frequency, current per phase and neutral, PQS powers, fundamental powers V/A/P/Q/S, power factor per phase and total. – Energies: active, reactive, apparent, imported and exported, per phase and total. – Network quality: voltage and current total harmonic distortion, individual harmonics up to the 31st order. – Recordings: demands, extreme values. - Integration: The MAE-96V measurement unit allows connection of Rogowski current sensors (MSC-TCR models), offering the following advantages: – Opening and flexible, Rogowski coils are ideal for integration in tight spaces or for retrofitting in existing cabinets. – Excellent and linear accuracy across the entire range. – Increased safety: no heating or overload possible. – Easier maintenance: possibility to disconnect the secondary under full load. - Usage: Measurement visualization locally on a large LCD screen with 4 data lines and bar graphs, or remotely via Modbus RTU communication. - Applications: Suitable for wind or photovoltaic applications thanks to separate indexes for imported (consumed) and exported (produced) energy. - Accuracy: 0.5% for active energy and 0.2% for instantaneous measurements. - Compliance: CE, RoHS, REACh. - Applicable standards: IEC61000-4, IEC61010-1:2001, IEC62052-23:2003, IEC62053-22:2003. - Compatible current transformers: - MAE-96V measurement unit with Rogowski coils: MTCR-24-300, MTCR-36-600, MTCR-100-1000, MTCR-150-3000, MTCR-200-6000. - MAE-96A analyzer with 1A and 5A secondary current transformers. - Variants and order codes: Order code | Associated current sensors | Stocked product MAE-96V | Rogowski coils /mV | instock MAE-96A | Current transformer /1A and /5A | instock - Technical specifications: - Flush-mount measurement unit for Rogowski coils or 1/5A CTs - Measures single-phase and three-phase networks with or without neutral - Auxiliary power supply: 85-270V AC - Accuracy: 0.5% (active energy), 0.2% (instantaneous) - RS485 Modbus communication, 2 programmable pulse outputs - Backlit LCD display, 4-line data display with bar graphs - Panel cutout: 92×92 mm, case: 96×96 mm, depth: 70.7 mm - Pluggable screw terminals - Compliance: CE, RoHS, REACh - Standards: IEC61000-4, IEC61010-1:2001, IEC62052-23:2003, IEC62053-22:2003