Electronic module MSC-M4

Compact and efficient, the MSC-M4 energy measurement module allows for comprehensive analysis of a three-phase/four-wire circuit or three single-phase circuits: - **Main Features:** - Auxiliary power supply: 80 to 270V AC/DC. - Connection of 3 Enerclip current transformers: closed, opening, or Rogowski loops, to measure 1 three-phase/four-wire circuit or 3 single-phase circuits. - **High Precision Measurement:** - Active energy class 0.5S - Reactive and apparent energies - Voltage, current class 0.2 - Power, PF class 0.5 - Harmonics up to the 31st order class A - **Installation and Connection:** - 1-module width housing, DIN rail mountable. - Connection: - Current sensors via RJ12 cable - Voltage connections on pluggable screw terminal block - Auxiliary power supply and RS485 port on pluggable screw terminal block - **Extension Module:** - An MSC-ME module can be associated with the MSC-M4 measurement module to add the following features: - Temperature measurements. - Relay outputs controllable via Modbus or programmable on reaching minimum or maximum thresholds of current, power, voltage, temperature, etc. - Digital inputs - These MSC-ME extension modules allow interaction with the electrical circuits of the cabinet. - **Functionalities:** - Measurement of main electrical quantities for detailed circuit analysis: - Active and reactive energies, imported and exported - Multi-tariff counting - Voltage - Current - Active, reactive, and apparent powers - Power factor - Frequency - Demands - Extreme values - Average values - Harmonic distortion rate U and I - Harmonics up to the 31st order - Imbalances... - Control of electrical circuits: - The relay outputs and digital inputs of the extension modules allow control of electrical circuits based on measured values or external events. - Programmable relay outputs can ensure automation functions, alarm triggers, load shedding, etc. - Digital inputs are generally used to report the status of external electrical circuits in Modbus or to count and communicate the number of pulses emitted by a water or gas meter. - Energy performance monitoring: - By associating temperature and electrical consumption measurements, Enerclip V2 allows monitoring of the energy performance of buildings and infrastructures. - **Associated Products:** - Displays: The measurements of a large number of Enerclip MSC-M4 modules can be interfaced on the flush-mounted displays MSC-DE-2 and MSC-DE-4, as well as on the free Enerclip V2 software. - Current transformers: All Enerclip current sensors are connected to the measurement module via an RJ12 cable: - 3 closed current transformers, up to 600A, connected by a triple RJ12 cable. - 3 opening current transformers, up to 600A, connected to an MSC-TCO-TRI connector, itself connected to the measurement module via a simple RJ12 cable. - 3 opening and flexible Rogowski loops, up to 3000A, connected to an MSC-TCR-TRI connector, itself connected to the measurement module via a simple RJ12 cable. - Measurement center compatible with Enerclip current transformers: - Closed CTs: MSC-TCF - Open CTs: MSC-TCO - Rogowski loops: MSC-TCR - Compatible with: MSC-DE-4 or MSC-DE-2, associated with the MSC-C1 communication module. - **Advantages:** - A measurement center in a 1-module housing! - Easy connection with CTs connected via RJ12 cable and other connections on pluggable terminal blocks. - **Standards and Certifications:** - CE, RoHS, REACh. - **Variants and Order Codes:** - Order Code | Module Function | Product Stocked - MSC-M4 | Main module – Electrical measurements | instock - MSC-ME0 | 4 temperature probes | instock - MSC-ME1 | 4 temperature probes and 3 digital inputs | instock - MSC-ME4 | 4 temperature probes and 4 relay outputs | instock - MSC-ME10 | 4 temperature probes, 3 digital inputs, 1 relay output, and 1 insulation controller | instock - **Characteristics / Technical Specifications:** - Auxiliary power supply: 80 to 270V AC/DC - Connection of 3 Enerclip current transformers (closed, opening, or Rogowski loops) - Measure 1 three-phase/four-wire circuit or 3 single-phase circuits - Active energy class 0.5S - Voltage, current class 0.2 - Power, PF class 0.5 - Harmonics up to the 31st order class A - 1-module width housing, DIN rail mountable - Current sensors via RJ12 cable - Voltage connections on pluggable screw terminal block - RS485 port on pluggable screw terminal block - Available extension modules: temperature measurements, relay outputs, digital inputs, insulation controller - Compliances: CE, RoHS, REACh