Gear motor with worm screw and standard motor Ø 37x34 24 Vdc 5000 RPM output W, with noise suppressor.
Driving shaft mounted on two bearing and bushing. Outlet shaft supported by two bearings.
Design to give low RPM in little dimension
* The rotation speed can change of ± 10%.
The S1 load test was made using a 0,8 A corrent in the air with an increase of temperature of 70 C°
The S2 load test was made using a 1,5 A corrent in the air with a timing 5' ON 5' OFF with an increase of temperature
of 80 C° max
The starting corrent is 4 A and cannot be maintained for more than 2"
Max forces wich may act on the outlet shaft: Axial 25 kg, Radial 40 kg
It is possible to apply an encoder.
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 110 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures.
9 gear ratios (i) available, from 37,5 to 400. Rated torque 23,5 Nm. Version B3 or B5. B5/S left version - B5/D right version.
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 120-160 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil.
Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 33,25 to 475. Rated torque 90 Nm. Version B3 or B5. B5/S left version - B5/D right version.
BCE2000
MOTOR: Asynchronous-single and three-phase-2 pole. Enclosed with external ventilation. Safety thermal cutout. Class F winding according to VDE0530 standards. Insulation IP65 according to CEI EN 60529 standard.
GEAR UNIT: With die-cast aluminium case in first reduction stage with worm screw and in steel in second planetary reduction stage with three internal planetary gears. Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 50/75/125/225/300/400. Maximum rated torque is 14,4 Nm. Manufacture B3/14.
BCE2000 12/24MP
MOTOR: Direct current with permanent magnets, enclosed. Class F winding according to VDE0530 standards. 12 or 24 Vdc. Absorbed power 60 W.
Insulation IP65 according to DIN40050 standard.
GEAR UNIT: With die-cast aluminium case in first reduction stage with worm screw and in steel in second planetary reduction stage with three internal planetary gears. Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 50/75/125/225/300/400. Maximum rated torque is 15 Nm. Manufacture B3/
B14.
Geared motors
