|
|
DC - Gearmotors SERIE 42
Supplie voltage 12-24V
No load speed (rpm) 40-150
Shaft power: 1 Nm duty cycle S3 |
|
DC - GEARMOTORS Ø 76 Axle distance 35 mm
Supply voltage 12÷48V
No load speed(rpm) 15÷220
Shaft power:
3÷22W-----15÷40rpm
18÷35W----40÷120rpm
20÷50W----120÷220rpm. |
|
DC - GEARMOTORS Ø 62 Axle distance 31 mm
Supply voltage 12÷48V
No load speed(rpm) 30÷100
Shaft power: 20÷70. |
|
DC - GEARMOTORS Ø 90 Axle distance 45 mm
Supply voltage 12÷48V
No load speed(rpm) 15÷220
Shaft power:
4÷45W-----15÷40rpm
15÷60W----40÷120rpm
20÷60W----120÷220rpm |
|
| Venture has a variety of gearboxes available, both motorized and manual. Many are customizable to suit your specific need. If we don't have exactly what you need contact us and we will be happy to investigate making a custom unit for your specific application. |
|
Mechanically commutated permanent magnet DC motors
Mechanically commutated permanent magnet motors are designed for operation with 24 V direct voltage and provide a nominal torque and a nominal speed with this voltage.
The exact motor speed is dependent on the required torque, according to the motor characteristic. Speed control is possible in conjunction with external open-loop control.
The lifetime of a mechanically commutated permanent magnet motor is designed for 3000 hours (operating factor CB=1 and nominal load) (carbon brush wear). |
|
MB series characteristics:
MB reducer consists of compressed drive devices, friction transmission devices and speed-regulating devices.
Wide speed-regulating range, stable running,
Speed-regulating range R=5, suitable for constant running at clockwise orcounterclockwise, speed can be varied at the starting or in running.High precision of speed-regulation, coaxial , compact design, light weight. Under permissible load, certain output speed is constant. Stable running, silent, long lifetime, less maintenance, easy operating, high efficiency.
Rotation direction,
Basic speed range: 200-1000rpm
Combination: 0.001-2000rpm(Subsection)
Torpue: 1.5-980kW
Power: 0.18-22kW
|
|
Type A and Type B
The two drive types are controlled by a simple cable remote control with up/down keys. We recommend Type B for high loads. The engine and the control are built into the housing. The transformer (230 VAC, optionally 110 VAC) is attached on the outside of the housing. The cable remote control (2 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
Typ C
On drive Type C different heights can be memorized and automatically selected. The memory board also has a digital height indicator. The infrared remote control is available as an alternative to the memory board. The power supply (230 VAC, optionally 110 VAC) is integrated into the control unit. The memory board (2.5 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top. |
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers |
|
Electronically commutated permanent magnet EC motors
EC direct current motors have very long lifetimes due to their electronic commutation (normally over 10,000 hours). Speed control can be realised via the electronics integrated in most models. Electronically commutated motors normally provide high torque even at lower speeds.
DC gear motors are available even as external and internal rotors.
The external rotor is characterised by a high torque and a high mass inertia of the rotor.
The internal rotor captivates by its excellent dynamics. |
|
APPLICATION :
traction system for cleaning machines, material handling, golf cars, small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Diameter exit axles: 20 mm [0.78 in]
Reduction ratio: 16.4/1
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available |
|
APPLICATION :
traction system for cleaning machines, material handling, golf cars, small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Diameter exit axles: 20 mm [0.78 in]
Reduction ratio: 16.4/1
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available |
|
A unique Power Train for heavy-duty applications.
FEATURES:
* Voltage Range: 12 - 180 VDC
* Continuous Output Power Range:80 - 500 Watts
* Speed Range: 112 - 333 RPM
* Output Torque Range: 3.61 - 24.59Nm
* Construction: Aluminium
* Lubrication: Grease (sealed for life)
* Gear Material: Steel
* Poles: 4
* Brushgear: Cartridge
* Size Diameter): 142mm
* Size Length: 404mm
* Weight: 15Kgs
* Totally enclosed to IP44
* Insulation: Class F
* Connection: Flying lead
CUSTOM FEATURES
* Brake: 12 or 24 VDC to 8Nm with or without hand release
* Output shaft: Length, Diameter, Keyways, Threads (Internal or External)
* Leads: Length, Plug or Connector
* Paint Finish: Semi Gloss, Gloss, Hammer
* Paint Colour: Black, Grey, Blue, White
* Axle Length: Various to suit application
* Mounting: Various (including rubber shock mounts)
MOTOR COMPATIBILITY
PM62 & PM55 |
|
ASTRO a phase synchronous geared motor AS 80-6
Ex engine after guideline 94/9/EG (ATEX)
Employment = everywhere where explosion-sensitive media ELT of change of going become safe
z.B. Automotive, printing, food, regulation industry
GROUP OF EQUIPMENT II
Category 1 category 2 category 3
very high measure high measure normal measure
at security at security at security
Employment in Zone0 Zone20 Zone1 Zone21 Zone2 Zone22
Atmosphere
G = gas G D G D G D
D = dust
Permissions: Category 2
G = gas/zone 1
Engine: Ex II 2 G EEx e II T4
Gear motor: Ex II 2 G EEx ec II T4
D = dust/zone 21
Engine: Ex II 2 D IP 65 T 90°C
Gear motor: Ex II 2 D C IP 65 T 90°C
Gas, dust
Engine: Ex II 2 G EEx e II T4
Ex II 2 D IP 65 T 90°C
Gear motor: Ex II 2 G EEx ec II T4
Ex II 2 D C IP 65 T 90°C
|
|
Ultra flat dimensions
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Custom systems available from design to production
Very cost effective
Precision gearboxes available in all sizes
|
|
Hollow shaft (hex) gear motor. DC motor with worm gear.
- Actuator with integrated distance of travel output
- Simple upgrade from manual to motorized system
|
|
Modular, high quality drive solutions, specially designed for
a variety of industries and applications such as:
• Mechanical handling
• Medical industry
• Industrial automation
• Door automation
• Automotive
• Office equipment
• Pumps and Compressors
• Packaging and food industry.
As a premier supplier of high precision drive
technology, Dunker offers four product groups:
• BLDC motors
• BRDC motors
• AC motors
• Geared motors
Standardised motors and modular accessories
are available with a high degree of
flexibility to address specific
requirements.
The drive’s power ranges from 1 to
300 Watts. The motor range is further complemented by
high quality components:
• Planetary and Worm gearboxes
• Optical and magnetic encoders
• Tachogenerators
• Electro-magnetic brakes
• Electronic control systems.
Dunkermotoren offers cost-effective and reliable solutions.
|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
735 13 output W 4700 Rpm loadness, 24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor and the reduction gear are both plated for corrosion strength.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1, A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 1,6 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 4 A and cannot be mantained for more than 2".
Max forces which may act on the outlet shaft: Axial 10 kg, Radial 15 kg on the extremity of outlet shaft.
It is possible to apply an encoder.
|
|
Torque Range
45 Nm... 12.000 Nm
Mechanical Rating (n1= 1400 min-1)
0,08 kW ... 213 kW
Gear ratios
2,6 ... 1481
Output Configuration
Foot and Flange mount
Metric or Inch series Solid Output shaft
Input Configurations
IEC and NEMA motor Adaptors
Metric or Inch series Solid Output shaft
Applicable AC motors
Integral motors and Brake motors - M series
IEC-normalized Motors and Brake motors - BN series
Single and Dual Speed Motors
Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electonically
Controlled AC/DC Rectifier type SB, NBR, SBR (options)
Main Motor Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
|
|
| Planetary drives and gearboxes with rotating cases for the movement of wheeled or tracked vehicles. Available with static negative disc brakes, freewheel options and valves. Transmissible torques range from 80daNm to 370 daNm, radial load capacity up to 8000 kg. |
|
Excellent line-fed travel motors for one or two speeds, conical-rotor brake motors for highest demands for starting and stopping applications, as well as cylindrical-rotor motors for standard applications are available for outputs ranging from 0.18 to 45 kW as D-type helical geared motors for 90 to 5800 Nm, as W-type angular geared motors for 120 to 12,000 Nm and as A-type offset geared motors from 130 to 11,500 Nm.
|
|
• 4 sizes for torques up to 600 Nm
• speed up to 193 rpm
• compact design
• integrated encoder or potentiometer (option) |
|
| The large variety at Habasit Rossi Motoriduttori gear motors and engines is the optimal solution for innumerable applications, for example for the packaging industry. The product assortment covers parallel wave, angle, coaxial, planet and worm gear engines as well as gear motors, brake motors and frequency static frequency changers. For example during the Flaschenabfüllung snail and angle gear motors with double seals, smaller play and further accessories are used. |
|
Atex
GST helical gearbox (geared motor)
GFL shaft-mounted helical gearbox (geared motor)
GKR bevel gearbox (geared motor)
GKS helical-bevel gearbox (geared motor)
GSS helical-worm gearbox (geared motor)
AC geared motors
Lenze offers drive solutions for use in potentially explosive atmospheres. Users have access to an extensive range of geared motors for ATEX categories 2GD and 3GD (gas and dust).
|
|
|
|