|
|
| Products 121 to 150 of 266 |
STRÖTER Worm gear motors
Torque range - 2000 Nm
Standard design
* three phase IEC AC-motor
* voltage : 230/400 V - 400/690 V
* type of protection : IP 55
* insulation class : B
* mounting position : D
* output shaft : hollow shaft or solid shaft (A or B)
STRÖTER Worm gear motors / power range 0,12 - 2,2 kW
|
|
|
|
|
|
ABM helical geared motors, shaft mounted helical motors and planetary back geared motors give added power to the motor torque and reduce the speed to the necessary level. Helical geared motors and shaft mounted helical motors are those most widely used in industrial applications.
These ABM drive units are particularly known for their:
energy saving of 98% efficiency at each stage
economy due to favourable cost/performance ratio
rugged and practically maintenance-free
environment friendly drive type (compared with internal combustion engine, hydraulics, pneumatics)
The high-quality helical gearing with polished tooth profiles guarantee complete smoothness of operation and accurate power transmission.
ABM Helical Geared Motors
a shaft height of 71 mm to 315 mm
drive torque of 30 to 6000 Nm
rpm from 2 to 750 rpm
ABM Shaft Mounted Helical Motors
drive torque up to 2500 Nm
speed from 3 to 220 rpm
reduction ratios of 6 to 250 to 1
ABM Planetary Geared Motors
drive torque up to 700 Nm
reduction ratios, single stage up to i = 12
all further details upon enquiry
|
|
KEB COMBIGEAR S Helical Worm Geared Motors
The KEB helical worm geared motors are available in the power range 0.12…12kW representing the “standard gear" in machines and systems due to their superior economic efficiency.
Lifetime lubrication, universal mounting construction and varied output options (solid shaft, hollow shaft) make this geared motor extremely adaptable
|
|
|
|
|
|
SEW-Eurodrive's S-Series gearmotors (right angle) offer helical-before-worm gearing combining durability with power-packed performance in a compact design that requires no motor belts or couplings.
-Reducers
Worm shaft and helical gears manufactured from certified steel, heat treated to a case hardness of 58-62 Rockwell C for long gear life
Gears are milled, hardened and ground to assure maximum efficiency (up to 94%), minimum noise and heat generation
High capacity anti-friction bearings for optimum load carrying capacity and long life
Captured keys on input and output shafts
Gearcases made of high strength gray cast iron, SAE Class 30
High cross-section modulus design with stiffening webs for maximum rigidity
S-Series reducers are continuous duty at rated thermal capacity, based on ratio and input speed
Center tapped holes on output shafts
Double output seal design consisting of patented bi-helix inner seal made of Viton® and double-lip Nitrile (Buna-N) outer seal*
-Motors
NEMA Design B/C
Inverter duty
Connection terminals
Extremely low motor inertia
Mark for shipment into Europe
|
|
Efficient compact right-angle geared motor. A favorably priced alternative for the standard tasks expected of a right-angle drive.
- Sizes:
- S0 – S4.
- Rated torque:
- 23 – 800 Nm.
- Motor power:
- 0.12 – 9.2 kW.
- Gear ratio range:
- 6 – 683.
|
|
Worm gear units up to 20 Nm
Fed up of compromises or expensive customized gear motor solutions? Have a look at HeiDrive - the intelligent gear motor programme!
Configurate a gear motor perfectly adapted to your needs and requirements by choosing from different gear sizes, a variety of ratios
and a broad range of motor types and accessories. Whether you are in need of helical gears, helical bevel gears or worm gears -
HeiDrive always offers you the right choice!
Following ratios/torques are available:
Size S031 S031
Ratio i 7,0 up to 100,0 : 1 7,0 up to 100,0 : 1
Torque Mzth [Nm] up to 6 up to 6
Combination with motor type 3 phase motor 3 phase motor
Motor power P2 [W] 30 - 80 30 - 80
Motor speed [rpm] 2700 2700
|
|
Gear motor with worm screw and standard motor Ø 37x34 24 Vdc 5000 RPM output W, with noise suppressor.
Driving shaft mounted on two bearing and bushing. Outlet shaft supported by two bearings.
Design to give low RPM in little dimension
* The rotation speed can change of ± 10%.
The S1 load test was made using a 0,8 A corrent in the air with an increase of temperature of 70 C°
The S2 load test was made using a 1,5 A corrent in the air with a timing 5' ON 5' OFF with an increase of temperature
of 80 C° max
The starting corrent is 4 A and cannot be maintained for more than 2"
Max forces wich may act on the outlet shaft: Axial 25 kg, Radial 40 kg
It is possible to apply an encoder.
|
|
|
|
|
|
BCE2000
MOTOR: Asynchronous-single and three-phase-2 pole. Enclosed with external ventilation. Safety thermal cutout. Class F winding according to VDE0530 standards. Insulation IP65 according to CEI EN 60529 standard.
GEAR UNIT: With die-cast aluminium case in first reduction stage with worm screw and in steel in second planetary reduction stage with three internal planetary gears. Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 50/75/125/225/300/400. Maximum rated torque is 14,4 Nm. Manufacture B3/14.
BCE2000 12/24MP
MOTOR: Direct current with permanent magnets, enclosed. Class F winding according to VDE0530 standards. 12 or 24 Vdc. Absorbed power 60 W.
Insulation IP65 according to DIN40050 standard.
GEAR UNIT: With die-cast aluminium case in first reduction stage with worm screw and in steel in second planetary reduction stage with three internal planetary gears. Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 50/75/125/225/300/400. Maximum rated torque is 15 Nm. Manufacture B3/
B14.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 110 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures.
9 gear ratios (i) available, from 37,5 to 400. Rated torque 23,5 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 120-160 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil.
Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 33,25 to 475. Rated torque 90 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
ASTRO a phase synchronous geared motor AS 80-6
Ex engine after guideline 94/9/EG (ATEX)
Compact building method
Area of application:
Gases, steams or fog "G"
Types of dust "D"
z.B. Automotive, printing, food, regulation industry
1~24V for 50 or 60 cycles per second
Speed range 0.75 - 1200 Upm
High stable torque process
GROUP OF EQUIPMENT II
Category 1
very high measure of security
Zone 0 and 20 = no permission
Category 2 = permissions
high measure of security
Zone 1 = G (gas)
Zone 21 = D (dust)
Category 3
normal measure of security
Zone 2 = G (gas)
Zone 22 = D (dust)
Ignition enclosure:
G = gas/zone 1
Engine: Ex II 2 G ex e II T4
Gear motor: Ex II 2 G ex ec II T4
D = dust/zone 21
Engine: Ex II 2 D ex tD A21 IP65 T 90°C
Gear motor: Ex II 2 D ex tD C A21 IP65 T 90°C
LARVA IN GERMANY
|
|
Type
RK543AA
Series
5-phase with microstep (RK-Series) (Standard type)
Technical data
Type
RK543AA
Frame size [mm]
42
Shaft type
single
Holding torque [Nm]
0.13
Step angle [°]
0.72
Power supply
single-phase 100-115 VAC
RoHS-compliant
yes
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
Ultra flat dimensions
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Custom systems available from design to production
Very cost effective
Precision gearboxes available in all sizes
|
|
Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
|
|
|
|
HELICAL GEARED MOTORS
- Helical axial output:
Cb 2000 - Cb 3000 - Cb 1500: Keyed solid shaft
- Helical bevel:
Ot 3000: Hollow or solid shaft
- Helical pendular mounting:
Pb 2000 - Pb 3000 : Gearbox with taper bush hollow shaft
- Variable speed:
Cb 2000 or Cb 3000 - LSMV : Keyed solid shaft - Centralised drive
- Integrated variable speed:
Cb 2000 or Cb 3000 - LS VMA : Keyed solid shaft - Decentralised drive
- Atex:
Cb 2000 or Cb 3000 - zone 21 : Geared motor fixed motor - Atex zone 21
Pb 2000 - Pb 3000 - zone 21 : Geared motor fixed speed - Atex zone 21
Cb 2000 or Cb 3000 - zone 22 : Geared motor fixed speed - Atex zone 22
Cb 2000 - zone 21 : Geared motor fixed speed - Atex zone 21
Pb 2000 - Pb 3000 - zone 22 : Geared motor fixed speed - Atex zone 22
- Atex variable speed:
Cb 2000 or Cb 3000 - LSMV PX FCR : Geared motor variable speed - Atex zone 21
Cb 2000 or Cb 3000 - LSMV - zone 22 : Geared motor variable speed - Atex zone 22
- Atex integrated variable speed:
Cb 3000 - LSPX VMA : Geared motor decentralised drive - Atex zone 21
Cb 3000 - LS VMA - zone 22 : Geared motor decentralised drive - Atex zone 22
- Food industry:
Cb 3000 IAW : Geared motor - Food processing : very harsh atmosphere
Cb 3000 IA / LS : Geared motor - Food processing
Guaranteed availability - Please determine reception date!
|
|
|
|
|
|
Parker's Stealth Gen II Helical Planetary Gearheads provide performance enhancements that include higher radial load capacities (four times greater in some cases) and increased service life (nearly double) resulting from the incorporation of more robust bearing support, dual angular contact bearings to support the output carrier, full complement needle bearings to support the planet gears and optimized gearing geometries. Internal design changes allow for one fill level for any orientation, resulting in shortened part number designation and simplified order placement.
The redesign incorporates a simplified motor mounting kit design, which will enhance Parker’s ability to build to stock allowing for quicker deliveries (potentially same day). Parker’s distribution channel will have a similar advantage, since gearheads of specific frame size and ratio could be stocked, then upon receipt of customer orders, a separate mounting kit could be pulled from their stock or delivered immediately from Parker Bayside. The new “universal” mounting kits (designated “MU”) are designed to be used across multiple product lines; therefore, axes that demand high precision -- Stealth Gen II (PS, RS), mid-range precision Stealth Gen II (PX, RX) and lower precision (PV) -- utilize the same mounting kit part numbers within the same frame size.
|
|
Shanghai SGR Heavy Industry Machinery Co.,Ltd. is one well-known manufactory in China. This company specializes in producing all kinds of gearboxes and gear motors.
Helical electric gearmotors we offer have a modular geared motor range, wide speed choice and price effectiveness.
Input power rating: 0.18 up to 160 kW
Output speed: 0.09 up to 832 RPM
Torque range: up to 18 000 Nm
|
|
The Series M geared motor has been developed with many years of design proficiency which results in a series of speed reducing geared motors offering high load carrying capacity, high efficiency, quiet running and reliability.
Product Specification:
Series M in line geared motors and reducers can meet a wide range of engineering demands offering a very efficient and compact drive solution offering input power up to 90Kw and a maximum output torque capacity of 11,000 Nm.
- Unit Sizes: 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 13, 14
- Input Power: Up to 90kW (121HP)
- Output Torque: Up to 11,000Nm (97,350 lb.in)
- Gear Ratios: 1.2 to 8:1 single reduction, 1.4 to 70:1 double reduction, up to 250:1 triple reduction 16,200:1 in combined units
- Motor Sizes: IEC Frames from 63 to 280; NEMA Frames from 56 to 405
|
|
|
The Series M gear motor range takes advantage of many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, high efficiency, quiet running and reliability.
|
|
Worm shaft made of 16MnCrS5, case-hardened and ground
Worm wheel made of high quality, wear-resistant bronze
|
|
We are a well renowned name among Geared Motor Exporters and Geared Motor Suppliers. We provide world class Helical Geared Motor. With the help our Geared Motor, we occupied a standard market place and are well accepted by a large group of people. Various type of Geared Motor are manufactured by us. We are moving ahead with our Geared Motor that are capable of changing the trends of the life styles.
When it comes to best quality Geared Motor, then there are very few alternatives available to Geared Motor provided by us. New materials and technical innovations from over years of research and experience has resulted in such advanced Geared Motor. Our industries are equipped with state- of -art manufacturing facilities. We have all modern machines needed for manufacturing. Our work force is the team of committed individuals, who understand and value their work.
|
|
A broad line of Browning helical gearmotors & speed reducers for a variety of industrial applications with most available from stock. Browning offers a complete line of helical shaft mount, right angle helical-worm and helical-bevel as well as inline helical concentric gearing products.
The Browning TorqTaper® Plus helical shaft mount speed reducer is ideal for bulk handling applications. The patented TorqTaper® Plus mounting system allows ease of installation and removal while the patented Barrier seal system provides protection in tough applications. 8 basic sizes are available from stock with mounting on shafts ranging from 3/4 " to 8". All Browning TorqTaper® Plus have tapered roller bearings for excellent thrust capacity. Offered with traditional belt drive inputs as well as hydraulic and NEMA C-Face inputs...Modular CEMA screw conveyor adaptor kits are also available from stock.
|
|
Our most selling and most economical unit, the BG gearmotor, sets new standards for reliability and economy and includes unparalleled standard features.
Features and benefits
Product range
Power rating up to 45 kW.
Main features
* Torque 20 ... 18.500 Nm
* Output Speeds 0,3 ... 450 min-1
* versatile installation possibilities
* Completely enclosed, sealed against dust and water spray
* Lubrication change first after 15000 hrs
* Low noise gearing
* Mains connection 110 ... 690V, 50/60Hz
* Enclosure IP65 (Standard), IP66 (Optional)
* Connection Standard with CAGE CLAMP®
* Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
* CE-Mark
* CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
* Motors according to EN 60034
* Corrosion protection CORO1, CORO2, CORO3
|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
752 40 output W 2900 Rpm loadness, 12/24 Vdc. Drivingshaft supported by self lubrificating bushings. Outlet shaft
supported by two coupled screened bearings. The motor and the reduction gear are both thrated for corrosion strength.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wire 0,75 x 200 mm.
* The rotation speed can change of ± 10%.
The S1 load test was made using a 1,3 A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 2,6 A corrent in the air with a timing 5' ON 5' OFF with an increase of temperature
of 80° C max
The starting corrent is 7 A and cannot be maintained for more than 2".
Max forces which may act on the outlet shaft: Axial 30 kg, Radial 40 kg on the extremity of outlet shaft
|
|
Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.
|
|
In-Line Gearboxes to 30Nm torque and 120Nm torque ratios. Available with a range of DC Motors and varying ratios.
Including:
G120 In-line gearboxes to 30Nm torque.
IMS In-line gearboxes to 120Nm torque
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
minimum order quantity: 100 units per annum
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single - phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die - cast aluminium. Case - hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long - lasting oil. Sealing rings made in special rubber for high temperatures. 14 gear ratios (i) available, from 6.48 to 372.8. Rated torque 20 Nm. Version B3 or B5.
|
|
INOX SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles (4 poles on request), totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530.
IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings, output shaft in stainless steel on request. Lubrication with long-lasting oil (no toxic). Sealing rings made in special white rubber for high temperatures.
15 gear ratios (i) available, from 7.4 to 441.9. Rated torque from 2,8 to 20 Nm. Version B3 or B5.
|
|
|
|
Electric gearmotors
