|
|
| Products 181 to 210 of 267 |
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 16 finely spaced frame sizes, spanning over the 1.000 - 450.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
|
|
ROTEK planetary gears -- perfect performance and stableness
High efficient - compact design
Our planetary gears are characterized by their optimum performance to size ratio and durability. The simultaneous direct intervention of three planetary gears per stage supports the handling of extreme forces within a small footprint.
Robust, maintenance free and versatile, these gears are predestined for really demanding applications. The excellent performance to size ratio gives customers an extremely compact and efficient drive unit in combination with our synchronous motors.
Benefits
> high torque within a small footprint
> high impact resilience
> excellent size to power ratio
Charateristics
> concentric output shaft
> low backlash
> maintenance free
Options
> Low-noise version
> Customized shafts and flanges
> IP53 protected
> special lubrication
|
|
ROTEK planetary gears -- perfect performance and stableness
High efficient - compact design
Our planetary gears are characterized by their optimum performance to size ratio and durability. The simultaneous direct intervention of three planetary gears per stage supports the handling of extreme forces within a small footprint.
Robust, maintenance free and versatile, these gears are predestined for really demanding applications. The excellent performance to size ratio gives customers an extremely compact and efficient drive unit in combination with our synchronous motors.
Benefits
> high torque within a small footprint
> high impact resilience
> excellent size to power ratio
Charateristics
> concentric output shaft
> low backlash
> maintenance free
Options
> Low-noise version
> Customized shafts and flanges
> IP53 protected
> special lubrication
|
|
ROTEK planetary gears -- perfect performance and stableness
High efficient - compact design
Our planetary gears are characterized by their optimum performance to size ratio and durability. The simultaneous direct intervention of three planetary gears per stage supports the handling of extreme forces within a small footprint.
Robust, maintenance free and versatile, these gears are predestined for really demanding applications. The excellent performance to size ratio gives customers an extremely compact and efficient drive unit in combination with our synchronous motors.
Benefits
> high torque within a small footprint
> high impact resilience
> excellent size to power ratio
Charateristics
> concentric output shaft
> low backlash
> maintenance free
Options
> Low-noise version
> Customized shafts and flanges
> IP53 protected
> special lubrication
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
ABM helical geared motors, shaft mounted helical motors and planetary back geared motors give added power to the motor torque and reduce the speed to the necessary level. Helical geared motors and shaft mounted helical motors are those most widely used in industrial applications.
These ABM drive units are particularly known for their:
energy saving of 98% efficiency at each stage
economy due to favourable cost/performance ratio
rugged and practically maintenance-free
environment friendly drive type (compared with internal combustion engine, hydraulics, pneumatics)
The high-quality helical gearing with polished tooth profiles guarantee complete smoothness of operation and accurate power transmission.
ABM Planetary Geared Motors
drive torque up to 700 Nm
reduction ratios, single stage up to i = 12
all further details upon enquiry
|
|
SEW-Eurodrive's P-Series combination planetary gearmotor offers high power density in the high power range. Inline co-axial and right angle configurations add design flexibility.
- Standard Features
Manufactured in plants certified ISO 9001:2000
International product support available through technical sales offices worldwide
Case hardened, spur steel gears are finished to AGMA 12 (ISO 6, DIN 6)
High capacity anti-friction bearings selected for extended life and trouble-free service
Gray cast iron housings; splash and pressure lube; modular construction
Fast delivery
-Mounting Configurations
Co-axial, right angle, foot mounted and flange mounted
Horizontal, vertical
Solid shaft or shrink disc, torque arm
C-face and V-belt motor mounts
Output mounting flanges
|
|
|
Power and reliability, the features that make this model ideal for large-sized gate leaves, such as industrial, sliding gates. The new generation electronics allows you to program the command to partially open the gate, control the proper running of the safety devices and automatically block the commands when any obstacles are detected.
|
|
DEIMOS SERIES
ELECTROMECHANICAL AUTOMATION FOR RACK SLIDING GATES
• SMART TECHNOLOGY.
> Electromechanical microswitches that control the end stroke (inductive on the prox version).
> Incorporated two-channel rolling code radio receiver.
> Control unit with self-learning and self-diagnostic functions.
> Control unit compatible with the EElink protocol.
• SAFE USE.
> The version powered at 24V has been specially designed for simpler and faster installation in compliance with the safety standards laid down by the Machinery Directive.
> Thanks to the antisquashing system, the operator inverts motion and prevents damage to people and property in the event of contact (BT).
> Electromechanical braking system (DEIMOS 800F).
• SIMPLER INSTALLATION.
> Incorporated control unit positioned frontally for easier accessibility.
> Control unit with programming by LCD display (BT).
|
|
Series C Right angle helical worm geared motors and reducers provide a highly efficient and compact solution to meet most requirements up to 45 kW with maximum output torque capacity of 10,000Nm.
Product Specification:
The Series C product adds to the growing family of new drives which has taken advantage of our many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, increased efficiency, quiet running and reliability.
- Unit Sizes: 03, 04, 05, 06, 07, 08, 09, 10
- Input Power: Up to 45kW (60HP)
- Output Torque: Up to 10,000Nm (88,500 lb.in)
- Gear Ratios: From 8:1 to 250:1 in a double unit and 60,000:1 in combined units
- Motor Sizes: IEC Frames from 63 to 225; NEMA Frames from 56 to 326
|
|
Right-angle geared motors are always applied where the mounting conditions or technical requirements call for a right-angle position. ABM worm gears are also available in a self-locking design, in elevators, for example, offering back-up safety to braking. Worm gears and helical worm geared motors are the classic solution of right-angle drives.
They offer the user the following advantages:
economy; due to the favourable cost/performance ratio
rugged and virtually maintenance-free
extremely quiet in operation
For applications requiring high efficiency, special ABM bevel gears are also available.
ABM Worm Gears
drive torques up to 300 Nm
reduction ratios up to 250 to 1
ABM Helical Worm Gear Motors
drive torques up to 4000 Nm
reduction ratios from 8 to 350 to 1
output speeds of 0.7 up to 330 rpm
ABM Bevel Gears
drive torques up to 1200 Nm
reduction ratios from 6 to 100 to 1
all other details available upon enquiry
|
|
BISON 756 SERIES
The 750 Series line of hollow shaft gearmotors allows hundreds of mounting configurations enabling engineers to optimize their assemblies. Industry standard mounts are available for drop-in requirements, and a hollow shaft style is available to use with optional accessories to meet your specifications.
|
|
607AC
115/230V PSC, TEFC AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output
Agency Approval: UL & CSA
|
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with brushless DC Motor.
G46 Compact right angle gearboxes to 20Nm torque.
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
CTM1
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 250 Watts
* Maximum Output Torque: 1Nm
* Speed Range: 3790 RPM
* Size Diameter: 87mm
* Size Length: 66mm
* Weight: 1.16Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
CTM2
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 350 Watts
* Maximum Output Torque: 1.5Nm
* Speed Range: 3700 RPM
* Size Diameter: 87mm
* Size Length: 72mm
* Weight: 1.92Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
minimum order quantity: 100 units per annum
|
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with a range of DC Motors.
GEARBOXES
G30 Custom non declutch right angle gearboxes to 11Nm torque.
G34 Custom declutch right angle gearboxes to 40Nm torque.
G46 Compact right angle gearboxes to 20Nm torque
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
G63 Compact Hi-Duty right angle gearboxes to 25Nm torque.
MOTORS
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts
minimum order quantity: 100 units per annum
|
|
|
BISON GEAR 746 Series Right Angle DC Gearmotor. Available in right or left hand orientations. Base mount - any angle. Reversible rotation, replaceable brushes. PMDC motor, TENV lifetime oil bath, sealed and gasketed. Available in 1/15 Hp. Max torque of 68 in-lbs
|
|
607 DC
90V PMDC, TENV Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output
Agency Approval: UL & CSA
|
|
Permanent magnet DC gear motors :
* AOMPI40 :
APPLICATION :
brush motor traction for trolleys, welding machines, small vehicles, golf, etc.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: steel worm and worm gear rolled or rectified with plastic or bronze gear
Reduction ratio: 12/1 - 18/1 - 37/1 - 65/1
Power up to: 200W
Electromagnetic brake available
* MRP4 :
APPLICATION :
brush motor traction for small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Max diameter exit axles: 20 mm [0.78 in]
Axles material: AISI 303
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available
|
|
Torque Range
100 Nm... 14.000 Nm
Mechanical Rating (n1= 1400 min-1)
0,22 ... 150 kW
Gear ratios
5,4 ... 1715
Output Configuration
Foot and Shaft mount - Two Bore Options per Size
Keyless Shrink Disc Fitting
Metric or Inch series Solid Output shaft
Taper bushings matching more shaft diameters
Splined hollow shaft to DIN 5480
Input Configurations
IEC and NEMA motor Adaptors
Servomotor adapters
Metric or Inch series Solid Input Shaft
Applicable AC motors
Integral motors and Brake motors - M series
IEC-normalized Motors and Brake motors - BN series
Single and Dual Speed Motors
Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electonically
Controlled AC/DC Rectifier type SB, NBR, SBR (options)
Main Motor Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
|
|
Slightly after the market introduction of the gearboxes RX 800 line the bevel helical series RX 700 is now ready to be launched as a natural complementary range covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and optionals making it a strong and realiable product.
|
|
|
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
* Thanks to its closed system, it can be used in every installation position
* 100% maintenance-free through lifetime lubrication
* Efficiency < 90%
* Lower noise level in comparison to cylindrical or bevel gears
* Options: IP65, dust and waterproof for applications in the food industry and similar applications (on some sizes only)
* Hollow shaft design for quick and simple fitting
* "Hygiene + " version with food-grade grease as a lubricant (optional)
Ratios: 5:1 to 1440:1
Motor: 15W - 5,5 kW
Torque: 0,3 bis 1480 Nm
Electrical connection: 230 V – 400 V 3-phase, optional 1-phase and other international voltages
Housing: Aluminium housing with 2-component paint finish, compact and corrosion resistant
Types: Flange and base design
Shafts: Hollow or solid shaft; shaft diameter adjustable according to client requirements
Lubrication: Grease filled, maintenance free
|
|
Varvel continues to score successes in its product range completion with the new hollow output shaft speed reducers 'Series RN-RO-RV'.
Each size of this new series - displayed at the former Hannover Fair, April 2007 - is designed with a common base body that gives rise to three different speed reducer lines by the means of the appropriate input module fitting: RN shaft mount, RO horizontal and RV vertical input bevel/helical.
Speed reducers are designed in six sizes - aluminium pressure die cast for the smallest three and grey cast iron for the bigger ones - with 30 reduction ratios in two and three stages, and output torques from 180 Nm to 3200 Nm.
Multiple foot-, flange- or torque arm mountings are available as well as hollow output shafts (keyed, shrink-disk, splined) and solid simple or double sided.
Same fixing footprint for the three versions, high flexibility, easy mounting and quick lead times are the pluses that make the speed reducers RN-RO-RV a really new and advanced range.
|
|
607 Universal
115V Universal, Vented Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output, Left / Right / Double Configuration Available
Agency Approval: UL & CSA
|
|
Right-angle geared motors are always applied where the mounting conditions or technical requirements call for a right-angle position. ABM worm gears are also available in a self-locking design, in elevators, for example, offering back-up safety to braking. Worm gears and helical worm geared motors are the classic solution of right-angle drives.
They offer the user the following advantages:
economy; due to the favourable cost/performance ratio
rugged and virtually maintenance-free
extremely quiet in operation
For applications requiring high efficiency, special ABM bevel gears are also available.
ABM Worm Gears
drive torques up to 300 Nm
reduction ratios up to 250 to 1
ABM Helical Worm Gear Motors
drive torques up to 4000 Nm
reduction ratios from 8 to 350 to 1
output speeds of 0.7 up to 330 rpm
ABM Bevel Gears
drive torques up to 1200 Nm
reduction ratios from 6 to 100 to 1
all other details available upon enquiry
|
|
The BM geared motor for more efficient electric overhead conveyors.
The BM09 for low load applications fulfills the requirements of directive C1 of VDE 3643.
Features and benefits
Product range
Power rating up to 0,55 kW.
Main features
* Torque bis 90 Nm
* Radial force up to 6.500 N
* versatile installation possibilities
* Completely enclosed, sealed against dust and water spray
* Lubrication change first after 15000 hrs
* Low noise gearing
* Mains connection 110 ... 690V, 50/60Hz
* Enclosure IP65 (Standard), IP66 (Optional)
* Connection Standard with CAGE CLAMP®
* Additional features: Connecting with Plug connectors.
* CE-Mark
* CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
* Motors according to EN 60034
* Corrosion protection CORO1, CORO2, CORO3
|
|
Applications
Wheelchair Drives
Personal Vehicles
Material Handling
Medical Drives
4", 4 5/8" or 6" motors available
Up to 1.5 HP
24 or 36 Volts
3400 Motor R.P.M
35 in-lbs. Manual Release Brake
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
|
|
No better, easier and neater installation than with a shaft mounted unit of the F series. Lightweight and performing, an F unit is the dependable drive for all the material handling applications.
|
|
The units are also available with rubber torque bushes, output flanges, output shafts and KIBO® sleeves to allow for trouble free maintenance. All variants can be fitted with standard IEC motors. Input shaft assemblies are available up to and including F10.
* Unit Sizes: 02,03,04,05,06,07,08,09,10,11,12
* Input Power: Up to 110kW (147HP)
* Output Torque: Up to 16,500Nm (146,000 lb.in)
* Gear Ratios: From 5:1 to 100:1 in double reduction form and in combined unit form up to 5,600:1.
* Motor Sizes: IEC Frames from 63 to 225
|
|
|
Simple and yet powerful is the S series, developed for the pump industry as well as the fan and blower application. Foot and flange mounted, with shaft dimensions to the UNEL standard.
|
|
|
|
Electric gearmotors
