|
|
A range of 12 to 180 Volt DC Motors with power outputs of 25-750W, available alone or in combination with a wide range of right angle and in-line gearboxes.
MOTORS
PM36 Custom permanent magnet motors up to 75 watts
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
GEARBOXES
G30 Custom non declutch right angle gearboxes to 11Nm torque.
G34 Custom declutch right angle gearboxes to 40Nm torque.
G46 Compact right angle gearboxes to 20Nm torque
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
G63 Compact Hi-Duty right angle gearboxes to 25Nm torque.
G120 In-line gearboxes to 30Nm torque.
IMS In-line gearboxes to 120Nm torque
minimum order quantity: 100 units per annum
|
|
DC - Gearmotors SERIE 42
Supplie voltage 12-24V
No load speed (rpm) 40-150
Shaft power: 1 Nm duty cycle S3
|
|
DC - GEARMOTORS Ø 76 Axle distance 35 mm
Supply voltage 12÷48V
No load speed(rpm) 15÷220
Shaft power:
3÷22W-----15÷40rpm
18÷35W----40÷120rpm
20÷50W----120÷220rpm.
|
|
DC - GEARMOTORS Ø 62 Axle distance 31 mm
Supply voltage 12÷48V
No load speed(rpm) 30÷100
Shaft power: 20÷70.
|
|
DC - GEARMOTORS Ø 90 Axle distance 45 mm
Supply voltage 12÷48V
No load speed(rpm) 15÷220
Shaft power:
4÷45W-----15÷40rpm
15÷60W----40÷120rpm
20÷60W----120÷220rpm
|
|
Tensions: 12 or 24V mini – 100/110 – 200/220 – 230/250 – V maximum. Series
A.C./D.C. or shunt D.C. special Tensions on request.
Engines Classifies “ F” – on closed rolls of the dice, lubricated with life. All to 2
direction of rotation.
Reducers tight and lubricated with life. Entirely on rolls of the dice, screw
without treated steel end and polished. Coil in composite or bronze on request.
Assembly multiposition.
Flexible connections Wire PVC 30cm or box on terminals on request.
Details of the Performances Engine Page 44.
|
|
Our innovative gearbox design expertise together with today's materials have been combined to exploit the full output power generated by this widest range of motors in the most price sensitive way. Each gearbox type is offered with many ratios, torque of 10mNm to 20Nm is achievable through the range with speeds peaking at 500 rpm.
Low noise and extended life are characteristics that are high on our agenda.
Motors and gearboxes can be combined in a manner that is infinitely variable, providing our customer with a precise and complete solution for each and every application.
All motor gearbox packages can be supplied with flying leads, connectors and output drives. A unique feature of this product range is the option of a single or dual channel signal feedback.
|
|
|
Venture has a variety of gearboxes available, both motorized and manual. Many are customizable to suit your specific need. If we don't have exactly what you need contact us and we will be happy to investigate making a custom unit for your specific application.
|
|
Mechanically commutated permanent magnet DC motors
Mechanically commutated permanent magnet motors are designed for operation with 24 V direct voltage and provide a nominal torque and a nominal speed with this voltage.
The exact motor speed is dependent on the required torque, according to the motor characteristic. Speed control is possible in conjunction with external open-loop control.
The lifetime of a mechanically commutated permanent magnet motor is designed for 3000 hours (operating factor CB=1 and nominal load) (carbon brush wear).
|
|
BISON 480 SERIES
Designed to replace motor-speed reducer combinations, Series 483 parallel shaft gearmotors are more economical and occupy less space.
|
|
BISON 300 SERIES
For up to 350 in-lbs., our 300 series is unmatched in voltage and speed options.
Features
• Rear tapped hole for encoder mount
Optional Features / Accessories
• Junction-Box
• Shaft Mount Encoder
• Accessory Shaft
|
|
GPG Series Gearmotors
A compact, lightweight and durable motor gearbox combination, the GPG series provides a high quality, low cost solution to suit a vast array of applications.
To provide maximum selection flexibility, 5 alternative gear ratios are offered as standard for each of 3 motor-gearbox models to suit 12, 24 or 36V rated voltages.
PML flat armature, ironless disc motors as used in applications worldwide, are renowned for their low inductance, zero spark, exceptional brush life. These qualities also ensure excellent EMC properties.
The GPG Series motors can be linked to PMA or PMC Drives
|
|
Electrical drives and couplings
Our range includes AC/DC linear drives, DC motors, AC/DC servo drives and frequency inverters. The range of couplings includes torsionally flexible and torsionally rigid couplings.
DC gear motor A+P with worm gear pair, 12 V DC
DC gear motor A P with worm gear pair, 24 V DC
|
|
DC motors up to 500W
Heidolph DC motors are compact and robust. Field loss is eliminated since field excitation of the motors is achieved by the use of permanent magnets achieving a high efficiency. The motors have an excellent dynamic response due to small mass moments of inertia.
Overview
Type 350 351 352 353 354
Power P2[W] 45 100 150 300 500
Voltage[V] 24 24 24 24 180
Nominal torque[Nm] 0.143 0.32 0.48 0.96 1.6
Nominal current [A] 2.6 5.54 8.33 15.6 3.3
|
|
|
|
|
|
The new Intecno micro gearmotors series characteristics:
- Coaxial arrangement of the input and output
- Compact design
- Advantageous torque with minimum space requirements
- Low moments of inertia
- Suitable for continuous, reversing and intermittent operation
- Can be installed in any mounting position
Planetary gearboxes stand out for having a wide range of reduction ratios, It’s possible to obtain a total of 72 reduction ratios from i=3.7: 1 (1 stage) to i= 2076:1 (4 stages). Planetary gearboxes are lubricated with grease and are therefore maintenance-free.
This product can be personalized due to the possibility of using metal, plastic or material mix versions. The LN (low noise) version is also available: It significantly lowers the gearbox noise.
The distinguishing features of D.C. motors in general are their high start torque as well as a torque/speed ratio suitable for high work loads. Another important characteristic of the D.C. motor is its density.
Features:
- Magnetic field generated by permanent magnets
- Available in 5 sizes: diameter 35,42, 52, 65, 80 mm
- Low voltage power supply, 12 or 24 Vdc
- Power ratings available from 8 to 140 W S2
Intecno micro gearmotors are perfect for many applications, in any sector where both small dimensions and good performances are required. These characteristics are important in the medical sector, robotics and also in electric vehicles. Other important fields are shutters for windows/doors where the movement required can be obtained by Intecno’s small DC motors and planetary gears. Options such as a bearing mounted input shafts and DC motor controls are also available to complete the product.
|
|
DC Electric Micro Gearmotor
* Gear Coreless motor
Diameter : Ø7 to 18 mm
Voltage 3 v to 12v
Gear type: Spur gear :Planeteary gear
Several gear ratio are available
* Gear Brushless motor
Diameter Ø1.5 to 30 mm
Voltage 3 to 24 v
Gear type : Spur gear , Planetary gear
Several gear ratio are available
|
|
|
High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras.
|
|
Canon's 16mm Gear Head Motor
Rated Voltage: 12V
Gear Ratios: 1/20-1/410
Rated Load: 58mNm – 294mNm
Rated Speed: 15 r/min – 245 r/min
Rated Current: 170mA – 342mA
Starting Torque: .25Nm- 3.23Nm
Canon will gladly attempt modifications to achieve the exact speed, power and current required of your application.
|
|
GM Series
GM12
10mm x 12mm 6V or 12V DC gearmotor, available in five gear reduction ratios. 30:1, 63:1, 100:1, 210:1 and 298:1
|
|
42A-GB Series DC Right Angle Gearmotor
42A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
Unvented gearhousing.
Industrial lip type seals on motor and output shafts.
Ball bearing on output shaft for increased radial load capacity and long life.
Permanently lubricated gearing utilizing oil for long life.
Hardened helical output gearing for quietness and high output torque.
Bronze primary worm gear for high shock load capability.
Hardened and ground worm hobbed on the motor shaft for high strength and long life.
Application Information:
Performance ratings of 130V models are based on use with filtered controls.
3-point mount, tapped holes on both sides of gearhead face, and four tapped mounting holes under the gearhead.
|
|
BISON MULTI-TECH™ 385 SERIES
Add your own stepper or servomotor to our NEMA gearboxes. Highly Efficient - helical-spur geartrains transmit 96% of the available power per stage, leading the industry. Low Backlash Ratings - less than 60 arc-minutes, create the ideal gear reducer for applications such as process conveyors, pumps, and dispensers. 200% Shock Load Capability - is standard in the Multi-Tech product offering, as it is in all of Bison's products. Gloss Black Powder Coat Finish - provides the durability needed for demanding environments. Grease lubricated for all position mounting.
|
|
Technical Description. Motor casing: Deep drawn, corrossion protected. Excitation field: Permanentmagnet. Method of bearing, A-side: Ball bearing, sleeve bearing optional. Method of bearing, B-side: Sleeve bearing. Gear: Worm gear.
Gear housing: Aluminium die cast. Gear wheel: plastic. Gear greasing:
Lubricant/permanent lubrication. Mechanic interface: Output shaft. Electric interface: Connector.
|
|
Voltage: 180 V DC, 24 V DC
Power: 40 - 350 Watt
Motor Speeds: 2000, 3000 min-1
Connection: flying leads or terminal box
Type of protection: IP 44 or IP 54
Ratios:
Type 12 - 5:1 up to 75:1
Type 13 - 5:1 up to 56:1
Type 14 - 6,75:1 up to 80:1
|
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers
|
|
The Bauer Aseptic Drive is a combination of an asynchronous motor with a smooth surface (without cooling ribs and fan) and a gearbox from the renowned Bauer 2000 range.
Features and benefits
Product range
Power rating 0,37 - 2,2 kW
Combines with:
BG Helical gears
BF Shaft mount gears
BK Bevel gears
Main features
* Easy-to-clean design allowing cleaning agents to drain off completely
* Dirt traps are avoided
* Re-infection avoided around the motor because the fan-free design means no air turbulence occurs
* High degree of protection (IP 67 and IP69K) as standard, with Aseptic acid and alkali resistant paint (pH2 - pH12).
* Motor windings equipped as standard with thermistors and class F insulation.
* Suitable for frequency inverter duty.
* CCC certified
Options
* Paint finish according to RAL tables
* Pre-fabricated 6 wire cable, 3m long
|
|
The VLT FCM 300 Series is a very compact alternative to the traditional solution with a VLT frequency converter and motor as separate units.
The frequency converter is attached in place of the motor terminal box. It is not higher than the standard terminal box - not wider nor longer than the motor.
|
|
Electronically commutated permanent magnet EC motors
EC direct current motors have very long lifetimes due to their electronic commutation (normally over 10,000 hours). Speed control can be realised via the electronics integrated in most models. Electronically commutated motors normally provide high torque even at lower speeds.
DC gear motors are available even as external and internal rotors.
The external rotor is characterised by a high torque and a high mass inertia of the rotor.
The internal rotor captivates by its excellent dynamics.
|
|
Modular, high quality drive solutions, specially designed for
a variety of industries and applications such as:
• Mechanical handling
• Medical industry
• Industrial automation
• Door automation
• Automotive
• Office equipment
• Pumps and Compressors
• Packaging and food industry.
As a premier supplier of high precision drive
technology, Dunker offers four product groups:
• BLDC motors
• BRDC motors
• AC motors
• Geared motors
Standardised motors and modular accessories
are available with a high degree of
flexibility to address specific
requirements.
The drive’s power ranges from 1 to
300 Watts. The motor range is further complemented by
high quality components:
• Planetary and Worm gearboxes
• Optical and magnetic encoders
• Tachogenerators
• Electro-magnetic brakes
• Electronic control systems.
Dunkermotoren offers cost-effective and reliable solutions.
|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
735 13 output W 4700 Rpm loadness, 24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor and the reduction gear are both plated for corrosion strength.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1, A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 1,6 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 4 A and cannot be mantained for more than 2".
Max forces which may act on the outlet shaft: Axial 10 kg, Radial 15 kg on the extremity of outlet shaft.
It is possible to apply an encoder.
|
|
|
|
Electric gearmotors
