|
|
| Products 91 to 120 of 267 |
|
Production of worm gear units and electric motors sizes 030 to130 reduction ratio 1:7 to 1:100
|
|
Tritex Series brushless servo-gearmotor with amplifier and control
Frame Size 2 – 3.5 inches, 51 – 89 mm
Maximum Continuous Torque Rating 2078 lbf-in, 235 Nm
Maximum Motor Speed 2500 rpm
|
|
The High Performance AR Series Single Axis Positioning Actuator consists of a zero-backlash / trouble-free RV reducer, compact servomotor, amplifier and controller - all within one unit.
The AR Series can support heavy loads due to the integrated support bearings in the RV reducer with high positional accuracy and excellent repeatability.
The AR series can accommodate up to 255 addresses and is ideal for a variety of applications where precise motion control is required, including: Headstock / Tailstock, Index Table, Robotic axis, ATC Magazine and Semiconductor equipment.
|
|
Features:
robust cast iron housing
gearing meets up to date international high standards
wide selection of motors and brake-motors including inverter-duty motors
units available for harsh environments
integrally cast foot or flange designs
sleek design for easy cleaning
all bearings selected to provide long and trouble-free operation
high quality sealing for enhanced leakage-protection
output side is integral part of the housing, no bolt-on output cover to cause leakage or gear-misalignment
|
|
ROTEK spur gears -- Flexible and reliable operation
Multiple speed ratios - maximum flexibility
Suitable for use in a variety of applications from equipment manufacturing through to heavy-duty industrial environments. Our spur-gear transmission ranges are equipped with hardened steel gears, premium lifetime lubrication, and robust sintered bronze bearings for a longer working life.
Multiple speed ratios and numerous options provide for maximum flexibility no matter what your application. In combination with our motors, they give customers an extremely compact drive unit.
Benefits
> high efficiency even at high gear ratios
> excellent cost-performance ratio
Charateristics
> low backlash
> maintenance free
Options
> customized shafts
> low-noise variants
> special lubrication
|
|
DESCRIPTION
Leading applications: general purpose, medium and fractional power drives.
Design: housings and covers of aluminium die cast up to size 4, of cast iron from size 5; two- and three-gear trains.
|
|
Uniblock design for foot and flange mounting. Gear case machined on all sides for universal application.
Revolutionary new gearing geometry here and in all the other models results in exceptional running smoothness. For special environmental conditions the gear unit can be fitted with two shaft seals.
|
|
Spur Gearheads
Compactline, for extremely quiet and high-performance drive applications.
Flatline, with the same approved properties as the Compactline but extra flat, making it ideal for limited space situations
|
|
STRÖTER - Helical geared motors
Range of power : 0,09 - 22 kW
STANDARD DESIGN
Motor : Three phase IEC AC- motor
Voltage : 230/400V - 400/690V
Power : 0,09 - 22 kW
Type of protection : IP 55
Insulation class : "B"
Mounting position : "B3"
OPTIONAL ACCESSORIES*
Mounting position : "B5" - flange mounted
Motor : Brake motors, Pole changing motors, Explosion
proof motors, DC - motors
Special : voltage / frequency
Type of protection : IP 56
Insulation class : "F" or "H"
Other : PTC Thermistor or temperature switch
MIG - Incremental pulse encoder
* special price
|
|
Benefits of ABM helical geared motors
Helical geared motors are the most commonly used industrial gearboxes. They efficiently increase motor torque while reducing motor speed to a
favorable range.
Key features of ABM helical geared motors:
- Energy conserving operation at 98% efficiencies per stage
- Outstanding value at competitive prices
- Robust and maintenance free
- Very low emission operation compared to com-bustion engines and hydraulic or pneumatic drives
High quality helical gearing with ground gear tooth flanks that guarantee quiet operation and precise torque transfer.
Applications:
- Material handling, cranes and hoists
- Textile production
- Construction industry (elevators, pumps)
- Packaging industry
- Sheet metal fabrication
|
|
|
|
|
|
SEW-Eurodrive's R-Series parallel gearmotors deliver exceptional performance and reliability combined with low maintenance. Available in many configurations, they continually distinguish themselves with their efficiency and durable gearing.
- Reducers
Gears manufactured from certified steel, heat treated to a case hardness of 58-62 Rockwell C for long gear life
Finished ground or shaved gear teeth to assure maximum mechanical efficiency (1-1/2% loss/gear stage), minimum noise and heat generation
High capacity anti-friction bearings for optimum load carrying capacity and long life
Captured keys on output shafts
Gearcases are made of high-strength, gray cast iron, SAE Class 30; R27 and smaller are made of high-strength, pressure-cast aluminum
High cross-section modulus design, with center wall for maximum rigidity
Center tapped holes on output shafts
Double output seal design consisting of patented bi-helix inner seal made of Viton® and double-lip Nitrile (Buna-N) outer seal*
-Motors
NEMA Design B/C
Inverter duty
Connection terminals
Extremely low motor inertia
Mark for shipment into Europe
|
|
Gear motor with worm screw and standard motor Ø 42 30 output W 24 Vdc 3700 RPM loadness, with electric noise
suppressor. Driving shaft mounted on a bearing and bushing. Outlet shaft supported by two bearings with oil splash
guard on the outlet side.
* The rotation speed can change of ± 10%.
Connecting 2 wire 0,75 x 250 mm.
The S1 load test was made using a 1,6 A corrent in the air with an increase of temperature of 70 C°
The S2 load test was made using a 3,0 A corrent in the air with a timing 5' ON 5' OFF with an increase of temperature
of 80 C° max
The starting corrent is 5 A and cannot be maintained for more than 2"
Max forces wich may act on the outlet shaft: Axial 25 kg, Radial 40 kg
It is possible to apply encoder
|
|
Bonfiglioli worm gears are milestones for the industry worldwide. They succeeded in combining uncompromising quality with state-of-the-art technology and renown price effectiveness.
Absolute flexibility is given by the wide choice of several mounting options, shaft configurations and motor interface, all offered as standard. The helical-worm and the double-worm version, with or without the torque limiter, also add up, creating a highly versatile drive system.
|
|
|
Production of worm gear units and electric motors sizes 030 to130 reduction ratio 1:7 to 1:100
|
|
|
The Series K geared motor is designed with integral cast feet for base or end mounting and can be offered with single or double extended output shafts. Units are also available shaft mounted or with output flanges and are available for mounting horizontally or vertically. The units can also be offered with a bolt on torque reaction bracket and all variants are available either motorised or with an input shaft assembly.
|
|
MSF/MSF combined worm gear motors
Worm gear speed reducers type SF-MSF are a new generation of products developed by our company.
|
|
WORM GEARED MOTORS:
- Worm and wheel:
Mb 2000 : Keyed hollow or solid shaft
- Variable speed:
Mb 2000 - LSMV : Keyed hollow or solid shaft - Centralised drive
- Integrated variable speed:
Mb 2000 - LS VMA : Keyed hollow or solid shaft - Decentralised drive
- Atex:
Mb 2000 - zone 21 : Geared motor fixed speed - Atex zone 21
Mb 2000 - zone 22 : Geared motor fixed speed - Atex zone 22
- Food industry:
Mb 2000 IAW : Geared motor - Food processing : very harsh atmosphere
Mb 2000 IA / LS : Geared motor - Food processing
Guaranteed availability - Please determine reception date!!!
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 26 mm. Wheel rim in special bronze 110 HB hardness. Worm gear in hardened steel with grinding thread rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures. gear ratios (i) available, from 7.5 to 80. Rated torque 9 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
MOTOR: Asynchronous-single and tree-phase-2 pole. Enclosed with external ventilation. Safety thermal cutout. Class F winding according to VDE0530 standards. Insulation IP65 according to CEI EN 60529 standard.
GEAR UNIT: With die-cast aluminium case (UNI 5076). Centre distance 20 mm. Bronze ring with hardness 110 HB. The screw is made of hardened steel with ground thread. The grommets are made of fluoridised polymer (FPM). Lubrication with synthetic oil (EP). 6 reduction gear ratios are available: 10/15/25/45/60/80. Maximum rated torque is 3 Nm. Manufacture B3/B14.
|
|
STAINLESS STEEL SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles, totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530. IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 26mm. Wheel rim in special bronze 110 HB hardness. Worm gear in
hardened steel with grinding thread rotating on ball and roller bearings, output shaft in stainless steel on request. Lubrication with special long-lasting oil. Sealing rings
made in special white rubber for high temperatures. Rated torque from 0,8 to 5 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 32 mm. Wheel rim in special bronze 120-160 HB hardness. Worm gear in hardened steel with grinding thread rotating on ball and roller bearings. Lubrication with special long-lasting oil. Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 7 to 100. Rated torque 20 Nm. Version B3 or
B5. B5/S left version - B5/D right version.
|
|
INOX SHAFT
MOTOR: Asynchronous three-phase motor with 2 poles, totally enclosed. Thermal safety feature.
Class H winding in accordance with VDE 0530. IP 66 standard protection(IP67 on request) in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing. Wheelbase 32 mm. Wheel rim in special bronze 110 HB hardness. Worm gear in
hardened steel with grinding thread rotating on ball and roller bearings, output shaft in stainless steel on request. Lubrication with special long-lasting oil. Sealing rings
made in special white rubber for high temperatures. Rated torque from 2,9 to 18 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
The UNIVERSAL Worm Gear Unit SI represents a homogeneous gear module. The single-piece aluminium die cast housing has no cover or sealing joints. The rigid housing block ensures the highest degree of operational safety even with the highest load capacity. This variable worm gear range features a modular design. The IEC/NEMA motor mountings in connection with the helical pre-stage form completely mounted gear modules that can be easily assembled.
A variety of individual gear designs can be combined from few modules. The UNIVERSAL Worm Gear Unit SI features as standard foot mounting on three sides, B14 flanges on two sides and an output hollow shaft. Modules that enable various applications of the gear series are plug-in solid shafts, output-side bolt-on type flanges, torque arms or helical gear pre-stages.
|
|
ROTEK worm gears -- twice as useful due to second shaft end
Smooth running - maintenance free technology
The worm gear transmission S can be used wherever you need a second shaft end, or to deflect forces by 90°. Additionally, the motor can be fitted at 90° to the device axis.
Fabric-based laminate worm gears give these transmissions the extremely smooth running performance needed for use in medical and laboratory applications. Bronze worm gears are available for applications with heavy loads and for longer service life.
Benefits
> Apply force at 90° to machine
> second shaft end
> Self-locking with higher gear ratios
Charateristics
> smooth running
> maintenance free
Options
> customized shafts
> special lubrication
> Bronze worm gears
|
|
Shanghai SGR Heavy Industry Machinery Co.,Ltd. is one well-known manufactory in China. This company specializes in producing all kinds of gearboxes and gear motors.
Helical worm electric gearmotor we offer is a modular geared motor with a comphrensive range of transmission power and competitive price.
Input power rating: 0.18 up to 22 kW
Output speed: 0.3 up to 205 RPM
Torque range: up to 4 000 Nm
|
|
The distinguishing features of D.C. motors in general are their high start torque, which enables them to overcome heavy loads at start-up, as well as a torque/speed ratio suitable for high work loads and to absorb the kickbacks of a variable load. Another important characteristic of the D.C. motor is its density i.e. considerable power and torques are concentrated within a compact size compared to other types of electric motors.
EC series of D.C. motors have perfected these typical features and offer the following advantages:
- Extremely compact with a robust and sturdy structure
- High quality balancing
- Low noise levels
Other features:
- Magnetic field generated by permanent magnets
- Tubular construction, without fan
- Available in 5 sizes: diameter 42, 52, 65, 80, 110 mm
- Low voltage power supply, 12 or 24 Vdc
- Power ratings available from 30 to 800 W S2
- Brushes made of a graphite/copper composite with a large surface to handle the current density well
|
|
DESCRIPTION:
Leading applications: general purpose, medium and fractional power drives
Design: housings and covers of aluminium die cast up to size 85, of cast iron for size 110; single worm/wheel units; ratios up to i=100.
|
|
|
Venture has a variety of gearboxes available, both motorized and manual. Many are customizable to suit your specific need. If we don't have exactly what you need contact us and we will be happy to investigate making a custom unit for your specific application.
|
|
Due to the unique combination of newly developed worm wheel material with special lubricants, extreme precision and optimized shapes, this powerful motor achieves comparatively high levels of efficiency and torque. The case machined on all sides enables diverse mounting options.
Double-chamber shaft seals made of HNBR are used as standard, guaranteeing complete leak tightness.
|
|
|
|
Electric gearmotors
