|
|
| Products 91 to 120 of 188 |
- Four series: 12 to 180 VDC DC motor voltage ratings, and 230 VAC/VDC universal motor rating
- 1/2 or 3/4 HP continuous, 1.5 HP intermittent ratings
|
|
The helical gearbox from the CMG series is available in 4 different sizes and has the following characteristics:
- Body and the PAM flange are made from aluminium
- The feet and output flange from iron
- The gears are always rectified for stages 1 and 2
- Permanent lubricant
The intensely thought out engineering behind the project allows us to make up the gears quickly by combining specific kits: this reduces the number of components and codes to manage and speeds up assembling and delivery time, which makes management easier and reduces warehouse costs.
The CMG is unique in its type as it is characterised by a higher grade of modularity which makes it ideal for many applications. Starting from the standard base it is possible to configurate the gear according to the applications requirements.
|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor 763 60 output W 3400 Rpm loadness, 24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor and the reduction gear are both plated for corrosion strength.
Connecting 2 wire 0,75 x 250 mm.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1,9 A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 3.6 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 14 A and cannot be mantained for more than 2".
Max forces which may act on the outlet shaft: Axial 30 kg, Radial 40 kg on the extremity of outlet shaft.
It is possible to apply an encoder.
|
|
MSF/MSF combined worm gear motors
Worm gear speed reducers type SF-MSF are a new generation of products developed by our company.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation.
Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: First stage with die-cast aluminium case, second stage in steel. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 37 to 2209.5. Rated torque 23.5 Nm.
Version B3 or B5.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 120-160 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil.
Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 33,25 to 475. Rated torque 90 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
Combined units of the series MKF + MOT
Mechanical speed variator MKF manufactured by SITI can be combined with series MOT right-angle reduction units, thereby obtaining right-angle axis transmission at an output speed that varies from 1 to 105 rpm with 9900 Nm maximum torque.
|
|
Portescap offers a variety of gearmotor and gearheads.
• Torque range of 10.4 mNm (1.47 oz. in.)
to 9534 mNm (1350 oz. in.)
• Reduction ratio of 5:1 to 2048:1
• Compact design
• Compatible with an array of specialty motor offerings
Details
Spur gear concept:
Only 1 transmission point per train
Input wheel made of special grade plastics
Planetary concept:
3 or 4 transmission points per train
|
|
|
Production of worm gear units and electric motors sizes 030 to130 reduction ratio 1:7 to 1:100
|
|
107 AC
115/230V PSC TEFC AC Design
AC Parallel Shaft Gearmotors: 207 AC
115V Shaded Pole Open Fan Cooled AC
115V Totally Enclosed Fan Cooled AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Phenolic High Speed and Hardened Steel Ball Bearings On Motor
Mounting: All Positions
Rotation: Reversible
Seals: O-Ring Type On Output
Agency Approval: UL & CSA
Other products
307 AC
115V Split Phase, Open Dripproof AC Design
407 AC
115V Split Phase, Open Dripproof AC Design
507 AC
115/230V PSC, TENV AC Design
|
|
107 DC Parallel Shaft Gearmotors
12V & 90V PMDC TENV Design
507 DC
12V & 90V PMDC, TENV Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Plastic High Speed and Steel
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: O-Ring Type on Output
Agency Approval: UL & CSA
|
|
* MRP6 :
APPLICATION :
brush motor for cleaning machines walk behind, or riders, etc.
FEATURES :
Type of motor mounted: MP80
Gearbox: parallel axis with steel gears
Reduction ratio: 10/1
Power up to: 600W
Electromagnetic brake available
|
|
Torque ratings consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application.The housing from nodular cast iron ensures robustness even in the harshest environment and the class of precision the gear are machined into helps producing an extremely quit and vibration-free operation.
|
|
The new range of universal helical gearboxes, establish a new standard on the market to refer to, having a suitable dimensioning fit for grant the maximum and constant reliability in the more heavy working conditions.
An effective answer to the power transmission requirements of the middle-heavy and heavy industry.
Ratio: Min 1/1,11 - Max 1/801
Torque (Nm): Min 1400 - Max 692000
Power (Kw): Min 0,72 - Max 9308
|
|
With MOTOX we offer both a modular geared motor range and a comprehensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
Features:
robust cast iron housing
gearing meets up to date international high standards
wide selection of motors and brake-motors including inverter-duty motors
units available for harsh environments
integrally cast foot or flange designs
sleek design for easy cleaning
all bearings selected to provide long and trouble-free operation
high quality sealing for enhanced leakage-protection
output side is integral part of the housing, no bolt-on output cover to cause leakage or gear-misalignment
|
|
SEW-Eurodrive's F-Series parallel helical gearmotor lives up to its name as the ideal drive for tight space conditions. This compact drive, with its multiple mounting configurations, is a rugged alternative to right angled gearmotors.
- Reducers
Gears manufactured from certified steel, heat treated to a case hardness of 58-62 Rockwell C for long gear life
Finished ground or shaved gear teeth to assure maximum mechanical efficiency (1-1/2% loss/gear stage), minimum noise and heat generation
High capacity anti-friction bearings for optimum load carrying capacity and long life
Double output seal design consisting of patented bi-helix inner seal made of Viton® and double-lip Nitrile (Buna-N) outer seal*
Captured keys on output shafts
Gearcases made of high-strength gray cast iron, SAE Class 30. F27 and smaller, made of high-strength, pressure-cast aluminum
High cross-section modulus design, rugged monobloc design for maximum rigidity
Center tapped holes on output shafts
Available with inch dimension, hollow or solid output shafts
- Motors
NEMA Design B/C
Inverter duty
Connection terminals
Quick disconnect IS terminal box option for fast motor replacement
Extremely low motor inertia
Mark for shipment into Europe
|
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units.
|
|
- Three series: Up to 1200 lb-in stall torque
- Up to 1/2 HP continuous rating
- 12 to 180 VDC
|
|
|
22 mm planetary gear motor - The gear motors are available in 2-, 3- and 4-stage versions, and gear ratios range from 19:1 up to 809:1. Currently nine different gear ratios in 12V and 24V versions are in stock, ready to ship. With these versions, torque values of 150 to 800 mNm can be achieved. The gears are made entirely of plastic and run very smoothly.
|
|
Planetary motor reducers dia. 38 with 110mm
Tension 12 or 24VCC
Acceptable couple 2,9 to 200 Nm
Speeds from 2 to 700 rpm - 1 with trains
Strong points:
- Robust Construction
- Capacity of high overload
- Reduced noise Level
- Optimal Lifespan
- Quality ratio/prices Excels
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
|
Over 60 years of supplying manufacturers with efficient gearmotors in small packages allows customers to concentrate on their application. Contact a Globe Motors application engineer today to assist with your specification.
|
|
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 16 finely spaced frame sizes, spanning over the 1.000 - 450.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
|
|
SEW-Eurodrive's P-Series combination planetary gearmotor offers high power density in the high power range. Inline co-axial and right angle configurations add design flexibility.
- Standard Features
Manufactured in plants certified ISO 9001:2000
International product support available through technical sales offices worldwide
Case hardened, spur steel gears are finished to AGMA 12 (ISO 6, DIN 6)
High capacity anti-friction bearings selected for extended life and trouble-free service
Gray cast iron housings; splash and pressure lube; modular construction
Fast delivery
-Mounting Configurations
Co-axial, right angle, foot mounted and flange mounted
Horizontal, vertical
Solid shaft or shrink disc, torque arm
C-face and V-belt motor mounts
Output mounting flanges
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
ABM helical geared motors, shaft mounted helical motors and planetary back geared motors give added power to the motor torque and reduce the speed to the necessary level. Helical geared motors and shaft mounted helical motors are those most widely used in industrial applications.
These ABM drive units are particularly known for their:
energy saving of 98% efficiency at each stage
economy due to favourable cost/performance ratio
rugged and practically maintenance-free
environment friendly drive type (compared with internal combustion engine, hydraulics, pneumatics)
The high-quality helical gearing with polished tooth profiles guarantee complete smoothness of operation and accurate power transmission.
ABM Planetary Geared Motors
drive torque up to 700 Nm
reduction ratios, single stage up to i = 12
all further details upon enquiry
|
|
- Up to 350 lb-ft stall torque
- Up to 2 HP continuous rating
- 12 to 230 VDC motor voltage ratings; 2- or 4-pole DC motors
|
|
|
|
Geared motors
