Cover meter NOVASCAN R630A

Multifunction rebar locator to ensure maximum precision in structural investigations Novascan R630A is used to determine the localization and distribution of rebar, the measurement of the thickness of rebar cover and the diameter of bars. The multi-functional rebar detector Novascan R630A, is used to determine: 1. Localization and distribution of rebar [General-Scan]; 2. Measure the thickness of rebar cover [General-Scan]; 3. Measure the diameter of bars and stirrups [General-Scan]; 4. Graphic reconstruction of the grid [Grid-Scan]; 5. Display the rebars in section for assessing the deviation from the known rebar cover to each bar or stirrup [Profile-Scan]; Multifunctional detector: GENERAL-SCAN: standard scan for the localization of rebars, measuring rebar cover and estimate diameter bars and stirrups. The “General-Scan” is available (independently) with the probe “Small” or the probe “Large”; PROFILE-SCAN: this acquisition mode provides a view in section of the rebars. By entering the knowing cover value you can evaluate the deviation from this value for each bar or stirrup. The “Profile-Scan” is available only with the probe “Large”; GRID-SCAN: scan that allows to reconstruct the mesh of the rebars and evaluating their distribution within the element under investigation. The “Grid-Scan” is available only with the probe “Large”; The acquired data are stored on the device’s internal memory. The export is carried on USB device for transferring data processing software for data analysis and report generation test.