DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C
... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16. ...
DN: 30 mm - 1,000 mm
Pressure: 40, 63, 100 bar
... Middle and low pressure valves The standard line of VAPTECH Spherical valves is designed for diameter range from 300 to 1000 mm and pressure ratings 40, 63 and 100 bar. The valve actuation is with ...
VAPTECH LTD
DN: 8 mm - 100 mm
Pressure: 125, 69, 100 bar
Temperature: -38 °C - 220 °C
... 3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve. (Option: FDA - Firesafe) EU1935 ...
Dansk Ventil Center A/S
DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C
... Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure rating SW up ...
Stahl-Armaturen PERSTA
... Pressure reducing valves The pressure reducing valve is a device designed to reduce the pressure of a gas from an initial generally variable value to a final given value at the end of a process. Primary, secondary and ...
ODL
DN: 0.25 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 450 °F
... The general purpose carbon steel ball valve is available in sizes 1/4" - 4" with a working pressure of 1000PSI (150 PSI WSP steam rating). Available with NPT (threaded) or socket weld end connections. ISO 5211 mounting pad standard with ...
Valtorc
DN: 50 mm
Temperature: -26 °C - 240 °C
... 2” access fitting. The valves have a bleed valve located on the non-process side of the ball. This bleed valve may be used to drain the retrieval tool, sample process, or be used as a path for back-pressuring. ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing which protects completely the ...
... POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version 410-C is designed with a stronger ...
Pressure: 600 bar
... • Manual operated valves (leakage free) • 3/3-way for use with single acting cylinders • 4/3-way for use with double acting cylinders • Maximum flow 40 l/min • Maximum working pressure 600 bar • Oil ports M18x1,5 • Lever operated ...
QUIRI
... control abrasive valve uses ultra-wear-resistant composite materials, long life, easy flow adjustment, can spray steel shot, steel sand and other large materials. During sandblasting operation, a control signal is sent to the intake ...
DN: 0.5, 1, 1.5, 1.8 m
Temperature: 150, 180 °C
... injection valve ensures straightforward isolation of the mould cavity and vacuum tight sealing, ensuring reliable and clean operation • Careful positioning of the material port allows use in deep mould structures with limited access ...
DN: 50 mm - 1,250 mm
Pressure: 1,500 Pa
Temperature: 40 °C
... Ventilation fittings, round plastic fittings for exhaust air systems Our range of fittings for aggressive/corrosive exhaust air has impressive quality and service life. ...
Pressure: 0.3 bar - 3 bar
... CHARACTERISTICS Flame failure valve by thermocouple with pilot outlet : Double beat valve or without pilot outlet : single beat valve. Gas shut off after 1 minute of flame extinguishing. Modèles : T10 ...
DN: 20, 25, 32 mm
Flow rate: 4 m³/h - 21 m³/h
... three-way/two-way zone valve ZV is designed for controlling the output of water heat exchangers. Technical Specifications Cylindrical shut-off allows stopping the flow regardless of pressure Option for manual changing of valve ...