|
|
| Products 121 to 150 of 238 |
Data Transceiver /RF Radio FC-221AG
1) Comply with FCC&CE
2) PLL & TCXO
3) 25KHz /12.5KHz channel spacing
4) 19.2kpbs RF data rate
Application:
Wireless AMR system;
Wireless data collection;
Industrial control and telemetry;
Wireless queuing system;
wireless weighting scales;
Security monitor and alarm;
LED sign automatic display;
Specification :
1) Frequency band: 433MHz(default),868MHz,915MHz
2) 3FSK
3) Channel: 8, customized for more channels.
4) RF Power: <50mW
5) Receiver sensitivity: -118dBm@1200bps,-115dBm@2400bps
6) Transmit current:<45mA/TTL,<51mA/RS485,<52mA/RS232
7) Receive current:<30mA/TTL,<35mA/RS485,<35mA/RS232
8) Sleep current: 25uA
9) Cgannel spacing:25kHz
10) Interface: UART/TTL,RS-232,RS-485,Baud rate: 1200-19200bps.
11) RF data rate: 1200-19200bps
12) Power Supply: 5.0±0.5V DC(customzide for 12V)
13) Temperature: -30°C ~ 80°C
14 )Size:40mmx27mmx6mm
15) Weight: 10g
|
|
High speed Data transceiver/ data radio/ FC-222
Technical specification:
Frequency band: VHF/UHF, default band: 220MHz
Modulation : 3FSK
Channel spacing 5KHz12.5KHz18.75KHz and 25KHz optional.
Three interface RS-232,RS-485 and TTL optional.
RF Data Rate: 1200bps,2400bps,4800bps,9600bps,19200bps optional.
Power supply :+10.5V +15.0V,Nominal voltage +13.8V
Standby current :¡Ü80MA
RX current :¡Ü100 MA
TX current :¡Ü1.6A
Operating temperature : -40+85
Channel spacing :5KHZ
Modulation : 3FSK
RF output power :5.5W¡À0.5W
Frequency deviation :¡À500HZ
RX sensitivity : ¡Ü-118dBm1200bps.
|
|
AutoLog® 16
Expandable I/O, using I/O expansion cards. Old, but popular model. Partially replaced by AL20AN model.
Digital inputs (DI) 8 pcs 24 VDC / max. 8mA
Digital outputs (DO) 8 pcs 24 VDC / max. 0.5A
Analog inputs (AI) AL32AN: 6 pcs
10-bit (opt 12-bit), selectable input modules:
PT100, KTY10, 0(4)...20mA, 0...5V, 0...10V
|
|
|
|
|
|
AMC335
Intelligent Synchronous WAN Communications Module
HIGHLIGHTS:
* Multipurpose Intelligent WAN Communications Module for AdvancedTCA® and MicroTCA%u2122 Systems
* Mid-Size Single AMC Module
* Full Compliance with AMC.0 R2.0, AMC.1 R1.0, and AMC.2 R1.0 Specifications
* Four High-speed Channels Capable of Sustaining 2 Mbps per Port
* Freescale%u2122 MPC8270 PowerQUICC II%u2122 Processor
* 128 MB Dedicated Processor SDRAM Memory
- Handles Extensive Onboard Traffic and Protocol Requirements
* 32 MB Application Flash
* NexusWare® WAN Protocol Software:
- Radar Receiver
- TADIL-B
- HDLC
- X.25
- Frame Relay
- ASYNC
* NexusWare® CGL OS and Development Environment
* Broad Operating System Support Includes Solaris%u2122, Windows®, and Linux®
The use of AdvancedTCA® and MicroTCA%u2122 systems for the aerospace and defense markets, as well as for telecom OEMs, will require high-density, highly advanced I/O solutions for use in these new environments. As a long-time contributor to industry standards and emerging technologies, Performance Technologies provides a combination of powerful hardware and advanced software that enables its customers to fully leverage AdvancedTCA and MicroTCA capabilities for the creation of high-density, high-performance solutions.
The AMC335 Intelligent Synchronous WAN Communications module provides four high performance synchronous/serial channels for WAN connectivity. This module is ideally suited for use in creating flexible and efficient radar gateways, radar recorders, protocol convertors, serial gateways, and front-end I/O elements as well as many other high-speed communications devices that require RS232, RS422 (RS449/EIA530), and V.35 connectivity. The AMC335 is part of Performance Technologies' industry-leading family of AMC solutions that include compute, storage, and video supported by powerful enabling software for embedded applications.
|
|
Net-Bee is a simple, but powerful controller for home or industrial wireless applications. The Net- Bee controller gives designers 2.4GHz ZigBee connectivity in a low-cost, high-performance single-board, rich with digital/analog I/O's, large data memory that designers need for embedded control and monitoring applications. Design your applications with an integrated BASIC, PASCAL or C compiler designed specifically for Net-Bee Wireless Controller.
Features:
- Small Size: 95x60x15mm.
- Microchip PIC16F88 controller at 8MHz.
- 8KB Flash for user memory applications.
- 32kB of EEPROM Memory.
- 2.4 GHz ZigBee RF Module.
- Free space range approx 300m for Net-Bee and 1km for Net-Bee Pro.
- Internal antenna for Net-Bee.
- Antenna connector for Net-Bee Pro.
- 4 Protected Digital Inputs.
- 4 10-bit Analog Inputs.
- SPDT Relay Output.
- USB communication - Optional.
- Real Time Clock backup.
- Normal and Sleep Mode operation.
|
|
HyperLan-Pack
Ready-to-use Point-to-Point Wireless Ethernet Bridge
HyperLan-Pack is a solution to establish a high speed Ethernet wireless link between buildings, factories, CCTV cameras, offshore platforms and temporary installations ... to connect Ethernet networks or Ethernet devices between each other.
HyperLan-Pack is available in two versions : long range (up to 5 Km) and medium distance (up to 1.5 Km) at 40 Mbps.
Range increase significantly (up to 50 Km) if data rate is reduced to 10 Mbps.
The kit is built around two WiFi units and two parabolic antennas, installation is very easy as described below :
Antenna height calculation depending on distance and land topography
Antenna mounting on masts
Antenna tilt calculation using ACKSYS software and a GPS
Antenna vertical alignment according to calculated tilts using a clinometer
Antenna horizontal alignment using a compass
Ethernet cable connexion on each unit
Radio quality and sustained data rate checking
|
|
Ethernet Air-Pack
Ready-to-use Point-to-Point wireless Ethernet Bridge
Ethernet Air-Pack is a ready-to-use solution designed to :
- replace any Ethernet cable between equipments (PC, IP video, printers ...),
- replace the network cable between the RJ45-wall outlet and the computer
- or even to establish a wireless bridge between two independent Ethernet networks (between two buildings, two PLC's networks ...).
The kit is built around two pre-configured WiFi units already associated, installation doesn't require any configuration.
|
|
PC-W provides wireless connectivity for serial devices of RS-232/422/485 and Ethernet devices. It is suitable for bridging communications in places difficult to wire or impractical to wire and also useful for mobile user interfaces, especially in an industrial environments. It can be used with all Brainchild's products HMI, IO modules, recorders & controllers or other industrial products.
FEATURES:
* 2 numbers serial ports
* Selectable RS-232/RS-485/RS-422 serial mode by software
* Transparent between Ethernet to Wireless networking
* Support UDP, TCP server and client protocols for Virtual COM mode and pair connection
* Configurable via built-in web server and Windows-based utilities
* Metal housing and IP50 standard with DIN-Rail mounting
* 15KV ESD protection for serial ports
* IEEE 802.11g 54Mbps wireless network connectivity
* Standard 2.4GHz High-gain antenna
** Please visit us at coming exhibition Hannover Messe 2009 at "Hall 9, Stand H24" during April 20-24, 2009.
|
|
|
SENCITY®LINK operates at a frequency of 60 Ghz with a net data rate of 100 Mbps full duplex over a distance of up to 800 m (2600 ft). Measuring only 16x16 cm (6.3"x 6.3"), its compact size is due to deep integration of its active and passive components. The SENCITY® Link system is unique in its small unobtrusive size and ease of installation which is facilitated by the simplicity of an optical pointing and alignment bracket. Extensive trials and customer installations have proven that this HUBER+SUHNER solution mitigates expensive civil works and minimizes visual impact.
|
|
|
|
|
|
Moxa's AWK-5222 AP/bridge/client has two independent RF modules to resist disconnections caused by radio interference. This robust feature makes the AWK-5222 series the most stable wireless solution for critical industrial wireless applications. The two independent RF modules create a exclusive wireless redundancy mode to increase the reliability of your entire wireless network. The AWK-5222 not only gives you a highly reliable solution for your industrial wireless networks, but also offers you a greater variety of wireless connection configurations to fit different wireless applications. For example, its wireless bridge mode is designed to optimize the problem of WDS (Wireless Distribution System) mode’s poor performance. On the other hand, the AWK-5222’s AP Client mode can be used to provide Internet access in areas where cabling would be too expensive or impractical to install. The AWK-5222 is a rugged, IEEE 802.11 a/b/g-compliant, 3-in-1 industrial wireless AP/bridge/client also compliant with IEEE 802.3af Power-over-Ethernet (PoE). With high speed Turbo Roaming™, which is great for rolling stock applications, and fast BSS (Basic Service Set) transition between access points, data transmission latency is prevented and wireless network roaming is seamless and super fast. On top of it all, the AWK-5222 is equipped with dual Ethernet ports that support RSTP or Turbo Ring™ for added reliability for your entire network.
Features:
‧Redundant dual-RF design for rapid failover
‧Industrial wireless AP/bridge/Client with IEEE 802.11a/b/g
‧100 ms Turbo Roaming™ for rapid handover during client roaming
‧RSTP for dual Ethernet redundancy
|
|
WLg-xROAD/S is a rugged equipment designed for applications in road and rail transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shockproof and vibration proof according to MIL-STD-810F standard, protection against dust and water projections.
The product is UTAC E2 certified (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.
|
|
|
|
|
|
Moxa's OnCell 5004/5104 is a high-performance industrial grade cellular router that allows up to 4 Ethernet-based devices to simultaneously use a single cellular data account for primary or backup network connectivity to remote sites and devices. They are typically deployed as the primary WAN link in areas or applications where using wired connections is too costly or unfeasible. In areas that can be wired, OnCell 5004/5104 can also be installed as a backup communication link in case the primary cabled link fails. The OnCell 5004/5104 is an intelligent, industrial strength and multi-functional cellular communication platform for the machine-to-machine (M2M) market. It differs from general routers by focusing on monitoring and managing remote sites and devices with RJ45 connectors, such as SCADA devices, programmable logic controllers (PLCs), and remote terminal units (RTUs). In addition, the OnCell 5004/5104 uses 12 to 48 VDC power inputs with a screw-on design for greater reliability, and its serial ports come with 15 KV ESD line protection to keep your system safe from unexpected electrical discharges.
The difference between the OnCell 5004 and OnCell 5104 is that the OnCell 5104 has an IA design and can be attached to a DIN-rail. In addition, the OnCell 5104 comes with a built-in relay output that can be configured to indicate the priority of events when notifying or warning engineers in the field, and the two digital inputs allow you to connect basic I/O devices, such as sensors, to the cellular network.
Features:
․Quad-band 900/1800, 850/1900 MHz GSM/GPRS
․Connect up to 4 10/100BaseT(X) devices
․Industrial primary and backup wireless WAN connectivity
|
|
|
NETGEAR’s routers and gateways not only work great, but also look terrific too. Inside our award-winning design you will find wireless routers with the range and coverage you need for today’s demanding applications and home networks. Count on them for ease-of-use, quality, reliability, and security.
|
|
The 9160 G2 is our newest and most advanced Wireless Gateway. This long range wireless access point enables you to mix and match RF technologies to best suit your requirements. The 9160 G2 offers support for dual 802.11 radios for a range of wireless applications. The 9160 G2 delivers robust security, with the ability to scale from basic WEP all the way up to 802.11i with AES encryption.
Industrial housing for demanding environments
Dual radio, 2.4 and 5 Ghz multi-band access point supporting 802.11 a/b/g/ radio standards
Enhanced real-time diagnostics and configurations via SNMP, HTTP, Telnet or serial console
Scaleable security
|
|
ARF20 / ARF30 - Logical and analogical status transfer 433/434MHz or 869MHz – 10 & 500mW LICENCE-FREE
* Monodirectional transmission of 8 logical status or 4 analogical values up to 4km
* 8 TOR inputs toward 8 "open collector" outputs or 4 relays
* 4 channels/8 bits – voltages 0/5V or currents 0/20mA
* Complies with the European standard RTTE EN300-220 / EN301-489
* IP65 box ready for use
* Industrial applications, long range transmissions and/or in disturbed environments
(in-town network, agriculture, difficult environments, building interconnection…)
o Information transfer
o Wireless remote control
o Alarm and security system triggering
o Level control…
|
|
Zlinx Wireless I/O, point-to-point/multi-point
How to select the right wireless system for your Modbus point-to-point/multi-point applications
Simplify your installation by sending your digital and analog inputs and outputs over the air. Why run a wire when you can install a Zlinx wireless module to replace it? The new Zlinx wireless product line provides point-to-point or multi-point communication, replacing your wires.
With bi-directional flow control, the controllers allow full-duplex transmissions to optimize the communiation efficiency. Modbus Mode - Up to 150 base modules in a system. Up to 6 systems can run simultaneously by using difference RF network I/O.
Connects directly to analog, digital and temperature inputs and outputs
Point to point/multi-point wire replecement
Expandable, modular design
Modbus compatible
|
|
|
|
|
|
Wireless Remote I/O - Cable Replacement
Banner introduced a new product line called SureCross Wireless I/O.
The DX70 is point to point architecture based on a pair of emitter/receiver. Digital or analogue I/Os are directly linked based on the internal terminal chamber identification. Unlimited pairs can work together in the same area without any interference.
The DX80 is a point to multipoint with up to 56 Nodes linked to one Gateway. The possible high number of I/Os can be transferred to supervision by communication with Modbus RTU (RS485), EtherNet/IP or Modbus TCP. Some Nodes can be powered by 24 Vdc, battery box or solar panel with rechargeable battery. Special DX99 Nodes come with ATEX certification Zone 0 for gas.
The DataRadio DX80DR2M is used mainly for serial (RS232 or RS485) cable replacement. This can be configured with one master and numerous slaves.
SureCross products fit with many different types of Industries (Factory and Process Automation, Water Treatment...). The high performance, reliability and low cost of this product makes it a natural solution for renovation/revamping of existing installations.
Main features include:
Rugged industrial housing giving an IP67 rating
Reliable and secure data communication with FHSS
Accept up to 12 different analogue or digital signals on one module
Up to 56 Nodes per Gateway with extended address mode
Line of sight maximum distance of 3 Km between Node and Gateway
Built-in signal strength visualisation
Link loss output indicates communication status
Specific FlexSensors adapted for a longer lifetime when using a battery
Frequency band of 2,4 GHz and 900 MHz depending on country
|
|
|
TO-PASS, a complete telecontrol solution offered by WAGO consisting of stand-alone fault detectors with GSM connection, optional IP66 protection and a telecontrol PLC that can be linked to the WAGO-I/O-SYSTEM. This enables widely branched systems to be acquired in the same manner as remote stations. A GPS version is even available for locating vehicles using satellite signals. An Internet server with MySQL database rounds out the system features.
|
|
|
SATELLINK products makes constructing your wireless communication applications easier than ever. The first product in the SATELLINK line, SATEL I-LINK 100, is designed for transparent transfer of contact information or analogue signals from one location to another together with the SATELLINE radio modems.
|
|
|
Wireless I/Os are the solution for applications where cables are not suitable to be used, such as cranes, AGVs and robots. In those cases wireless I/Os are used to transfer status and control information.
|
|
Wireless-based high-precision, 8-channel temperature measurement module;
requires WLS-IFC wireless gateway device
- 8 temperature input channels
- Supports thermocouples, RTDs, thermistors, and semiconductor temperature devices
- Superior performance - accuracy exceeds sensor output
- 8 digital I/O bits; user-configurable for alarming
- 802.15.4 wireless protocol
- Range: Up to 150 feet indoors, 2400 feet outdoors
- Included Software: TracerDAQ™, Universal Library, Universal Library for LabVIEW, and InstaCal
- Lifetime Warranty & Harsh Environment Warranty® included
|
|
The Radio Printer is part of a wireless system for temperature monitoring and control. It is made up by one or more temperature sensor-transmitters, like the TempStick Radio, and a radio receiver, the Radio Printer itself. It has everything it needs to work and doesn't require any PC or software : the display allows to configure the acquisitions and the printer to store easily and quickly all the stored data.
- no need of a PC nor software;
- graphic and alphanumerical LCD display;
- LED and sound alarms for thresholds set by the operator;
- display values for each sensor and all data recorded;
- rechargeable batteries and external power supply.
Applications:
stock houses and warehouses monitoring;
fridges and fridge cells monitoring;
environment monitoring;
computer rooms control;
laboratories monitoring;
transport monitoring;
catering services;
HACCP compliance temperature monitoring;
ISO compliance temperature monitoring.
|
|
|
|
|
|
|
The TempTrackr™ Multipoint System provides a batteryless, non-invasive and low cost temperature measurement solution that is ideally suited for applications ranging from High Power Switches to Rotating Machine Components. The Starter Kit is designed to showcase the capabilities of the TempTrackr™ Multipoint System. Each Kit includes three batteryless wireless temperature sensors that are capable of reading temperatures between 0°C and 120°C. The three sensors provide the ability to monitor temperature at multiple points of interest. The Surface Acoustic Wave (SAW) resonator within each sensor is powered by bursts of electromagnetic radiation emitted by a wireless reader (also known as a wireless interrogation unit). A feedback signal, conditioned by the temperature to which the resonator is exposed, is then electromagnetically transmitted to the wireless reader where it is processed for temperature measurement. The TempTrackr™ Multipoint System is capable of tracking up to six sensors and can provide temperature data via the CAN communication protocol. The number of sensors can be extended to 12 by making use of multiple interrogation antennae. The Starter Kit is an ideal technology evaluation tool3. SenGenuity will work closely with you to adapt the TempTrackr™ Multipoint System to meet the specific needs and requirements of your application.
|
|
ARF44 - Multi-channel transceiver with µC - 863/870MHz - 8mW
* Two-way digital link over 300 m
* 863-870MHz – multicanal- Wideband
* Module-Modem including a RF transceiver + µC + dedicated firmware
* On-board standard mode : Transparent
* Serial link: UART TTL
* Configuration and Set-up through Hayes commands
* Pin code
* Received signal strength indicator (RSSI)
* Consumer market, tertiary and industrial applications
o Short-distance communication
o Payment terminal
o Home applications
o Thermal regulation
o Traceability
o 'Consumer market' intercom
o Automotive
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product.
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77
|
|
The Micro-Cell Module gives designers GSM/GPRS connectivity in a low-cost, high-performance single-board, it can be used as a standalone and powerful GPRS modem with its intrinsic TCP/IP stack. Its plug-and-play functionality and GPRS features make the Micro-Cell Module ideal for use in a wide range of M2M business fields, such as metering and remote maintenance, traffic systems, transportation and logistics, security, vending machines and facility management.
Features:
- Small Size: 82x66x32mm
- Low-Cost GSM/GPRS Modem.
- Dual Band EGSM 900/1800 MHz.
- Intrinsic TCP/IP protocol stack
- Data and SMS communications.
- RS232 serial communication.
- Up to 256kb of EEPROM Memory
|
|
Agile-Link™ High Speed Wireless Data Acquisition System
- Wireless sensor and data acquisition system.
Agile-Link™ 2.4 GHz Wireless Base Stations
- Wireless Base Stations.
V-Link® Wireless Voltage Node
- Analog input datalogging transceiver for use in high speed wireless sensor networks.
SG-Link® Wireless Strain Node
- Direct strain gauge input datalogging transceiver for use in high speed wireless sensor networks.
G-Link® Wireless Accelerometer Node
- Triaxial accelerometers combined with datalogging transceiver for use in high speed wireless sensor networks.
|
|
|
|
|
|
Functional principle
The PLICSRADIO series is used for easy wireless transmission of 4 … 20 mA/HART signals and switching conditions. An emitting unit receives the measured values and can also serve as (Ex) power supply for sensors connected via cable. Individual 4 … 20 mA/HART sensors of all manufacturers can be integrated. A receiving unit receives the measured values via the radio distance and dependent on the version transmits them to a 4 … 20 mA output or a processing unit. An indicating unit in radio range can also show the requested measured values.
Applications
By using a license and registration free transmission range, a simple and reliable radio connection is available for industrial application areas. The instruments are used when wiring of a signal cable from the sensors to the processing is not possible or too complex. Obstacles such as streets, railways, rivers and buildings can be overcome without problems and in a price-favourable way. The use in mobile system parts such as conveyor belts, rotating vessels or in tankers are further application areas. PLICSRADIO series is best suited for quick and interference-free extension of existing plants or permanently changing plant constellations.
|
|
|
|
|
|
WLg-LINK-OEM
Access Point, Ethernet Bridge, bridge router & repeater (WDS) (a/b/g/h) full module for OEMs.
The WLg-LINK-OEM module used in the ACCESS POINT mode makes it possible to create an industrial WiFi wireless network from any industrial equipment featuring an 10/100 Ethernet interface.
Used in the BRIDGE mode, the WLg-LINK-OEM enables to connect any industrial equipment featuring a 10/100 Ethernet interface to the WiFi wireless network.
WLg-LINK-OEM module can also be used as a WiFi network repeater (WDS) in order to extend radio coverage, device supports both INFRASTRUCTURE and AD-HOC modes.
The WLg-LINK-OEM device is also designed to work as a wireless bridge between the wired MODBUS/TCP or PROFINET protocols and the radio network, this feature allows to connect any MODBUS/TCP or PROFINET equipments to this network.
Thanks to its built-in WEB interface, the setup of the device is achieved using the web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...).
WLg-LINK-OEM doesn't require any additional software to be installed on your computer (no peripheral driver needed).
|
|
WLg-ABOARD/N
WiFi Access Point, 2-port Ethernet Bridge, bridge router & WDS Repeater (a/b/g/h) for automotive or outdoor applications.
WLg-ABOARD/N is a rugged equipment designed for applications in road, railways, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, tramways, freighter ships, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shockproof and vibration proof, IP66 seal rating for protection against dust and water projections.
The product is UTAC E2 certified (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.
|
|
|
|
Wireless communication network equipment
