|
|
| Products 151 to 180 of 238 |
|
|
|
|
The WLI-E wireless LAN interface has been designed for applications requiring robustness and reliability in harsh environments or for embedded systems: public transport, trams, buses, trucks, building works machines, tower cranes, conveyors, rolling cranes, etc...
Protected against dust and water to IP66 class, with two M12 connectors (one for power and one for the Ethernet connection), it can be placed directly outside close to the antenna or can be deported (N male connector). It supports the Access Point, Client, WDS (client or AP) modes and provides advanced options such as, for example, a table with selected scan channels.
The setting is done by its very intuitive Web interface with multiple utilities and integrated diagnostic tests (throughput test, statistics, ARP table, log activity, site survey, etc. ...). Access can also be done by Telnet, SSH or HTTPS.
The Wi-Fi compatible WLI-E will impress you with its ease of installation and configuration, its robustness, performance and capabilities. They are a lot of applications, both for transmitting video, audio, data over TCP / IP and also connect various systems such as PLCs, data loggers, SCADA systems, etc...
|
|
|
The RuggedWireless™ family are industrially hardened Ethernet switches which integrate IEEE 802.11b/g Wireless Access Points, with fully managed wired 8-Port Ethernet switches providing six Fast Ethernet copper only ports and two optional copper or fiber ports. With the installation of the RS900W Series wireless access point, a network designer will achieve the integration of wired and wireless networks. The RS900W and RS910W can be configured as an access, client, or bridge device.
|
|
The SeaI/O-410W is a wireless interface to 16 optically isolated inputs and 16 Reed relay outputs. Inputs can range from 5-30VDC, while the Reed relays provide long life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
Communicate with the SeaI/O-410W over 802.11b and 802.11g wireless networks using the Sealevel SeaMAX API software libraries or use any Modbus TCP compliant device. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Windows 2000, XP and Vista operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.
|
|
|
|
|
|
Eurotech offers a range of ZigBee enabled products to the mobile, industrial and military markets.
A standard ZigBee or 802.15.4 is an excellent choice for many low power, low data rate wireless communication applications. However, is it really for everything? There are situations where 802.11 WLAN works very well for high data rate traffic. Similarly, there are applications that require long range & more battery life. ZigBee protocols are relatively light with respect to demands on code space (32-70 KB) and have a moderate range (10-100m). These make ZigBee a good choice for Industrial & Home Networking. One of the big advantages of ZigBee is the "mesh" capability. Mesh Networks allow messages to be passed from node to node such that if any of the nodes fail or drop out, the message can still reach its destination.
ZigBee Modules
1. nZB - suitable for Industrial Automation, Remote Control & Monitoring, Domotics, Remote Sensor Networking, Medical Equipment, Active RFID or localisation applications.
2. nZB Development Kit
3. uTOS - IEEE 802.15.2/TinyOS Module
4. ZStick - USB/ZigBee Stick
5. ZRouter - Router for ZigBee Mesh Networks
6. ZED - Multifunction ZigBee end device family with rechargeable battery
7. ModBee2400 - ModBus-ZigBee mesh network interface.
8. Zypad WL1100
|
|
|
|
|
|
The Wi.FREESTAR™ (PN: Wi.FS24-100ST™) is a powerful long range 802.15.4, 2.4GHz Zigbee-ready 100mW embedded radio module in a miniature footprint. It features the Freescale MC13192 Zigbee™ transceiver and the MC9S08GT60CFD Freescale microprocessor. The radio comes loaded with a highly efficient proprietary Star protocol but is easily upgradeable to the Freescale Bee-stack™ for Zigbee™ mesh type applications simply by downloading the stack to the MCU. The Wi.FREESTAR™ is ideally suited for point-to-point/multipoint networks or in Zigbee™ mesh applications.
The Wi.FREESTAR™ was designed to address the range issue with most +3dBm and below Zigbee type applications that struggle in real world environments. The TRUE 100mW PA allows users in North America to get the extra range allowed by regulations in this market. The module can also be set for 10mW to meet the reduced regulatory power output allowed in Europe and ROW applications. Key features of the Wi.FREESTAR:
· 10 and 100mW power output modes
· Embedded inverted F antenna on board
· External MMCX option available
· Fully FCC/IC/CE certified
· Small form factor 1.0” x 1.4"
|
|
| ... products without technical information |
| |
|
|
|
|
The Radiometrix UHX1 is a high-specification telemetry radio tranceiver.
The Narrow Band FM multi-channel VHF transceiver unit ideal for use in the new 169.4-169.475MHz European band. Squeezed into a compact, low profile package (67x30x12mm), it can provide a reliable data link capable of supporting rates of up to 5kbit/s or 1200 baud modem link over a range of more than 1km.
The dual frequency capability allows UHX1's transmitter section to be operated on one frequency while receiver frequency on another.
Features
-Conforms to ETSI EN 300 220-3 and EN 301 489-3
-High performance double superhet, 128 channel PLL synthesizer
-500mW RF power output: adjustable via serial command
-Data rates up to 5 kbps for standard module
-Usable range over 1km
-Feature-rich interface (RSSI, analogue and digital baseband)
-Incorporates a 1200baud modem
-Re-programmable via RS232 interface
-Low power requirements
Applications
- Heavy vehicle/machine remote controls
- Environmental monitoring equipment
- Automatic Meter Reading (AMR)
- Asset Tracking and Tracing
- Data logging systems
- Industrial telemetry/telecommand
- High-end security/fire alarms.
Technical specifications
Operating frequency: Any 2MHz segmnet in 140- 175MHz
128 channels controlled via RS232 interface
16 channels selected by parallel interface
Transmit power: : 500mW (+27dBm) nominal. Adjustable 1 - 500mW
Supply range: 5V regulated transmit, 3.1 - 15V receive
Current consumption: 330mA (at 500mW output) transmit, 25mA receive
Receiver sensitivity: -118dBm (for 12 dB SINAD)
|
|
|
|