|
|
- 8 opto-coupler inputs + 8 NPN transistor outputs
- Full duplex, cyclic or on event operating mode
- I/Os replicate in mirroring mode
- Compatible with ADN16-S (serial version) radio module
- Compatible with ModBus / Jbus protocol
- Securized communication (CRC16)
- Metal case for Din rail mounting in professional cabinet
- Screw terminal
- 1/4-wave professional antenna with 50 cm cable provided
- Professional power supply: 10 to 28Vdc
|
|
500mW multi-channel industrial radio modem RS232/RS485 or USB - WITHOUT LICENCE
The ARF53 enables two-way half duplex wireless data transmission over a range of 6000 m.
It integrates a multi-channel radio professional transceiver, a digital processing unit and a wide power dosing range on the same board.
Available as an IP65 enclosure ready for approved use, this modem uses the 869MHz (Europe) band according to the European directive RTTE EN300-220/EN 301-489 or the 902/928MHz (United-States) band according to the FCC Part 15.247 and is approved.
Data transfer is performed via an RS232/RS485 serial port or USB interface.
Configuration is performed by AT commands.
It can be used WITHOUT A LICENCE and covers most "long-distance" wireless data transmission applications, from remote meter reading type point to point transmission to constitution of cordless multipoint local networks, in sectors of activity such as automation, robotics, remote management... and more generally all types of applications requiring long range or in a particular disturbed environment : automatic piloting of buses traffic lights, urban traffic control extension....
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
| The radio professional transceiver ARM-C8 complete the ARM radio industrial modems range and offers a solution for all users who want a wireless function on their equipment. The versatile ARM-C8 features radio transmission that uses the license-free ISM bands: 868MHz (and 433MHz in option). The radio channel and the transmission power can be set by Hayes commands. The A.R.M. series enables link range from 1 to 2km in 10mW and a least 5km in 500mW. Very easy to integrate and to use, the ARM-C8 can operate in transparent or securized mode (serial port Baudrate up to 115200bps). The firmware includes most of all the current features required for radio transmission applications. The ARM-C8 is a small 64x32mm card to be directly solded on a PCB (12 points). The power supply specifications is 5V (350mA max in 500mW Tx) or 3-3.3V with the low power version. |
|
Single channel professional transmitter and receiver
The CDP-TX-04S-R and CDP-RX-03BS/AS-R are a FM narrow band miniature transmitter and receiver set. The low-cost compact modules are designed to operate with low voltage and current consumption. The miniaturization of the CDP-TX-04S-R is of particular note as compared with other narrow band FM modules.
The receiver CDP-RX-03BS/AS-R provides very high sensitivity -120dBm(434MHz) which realize long operation range. |
|
UHF Multi Channel Transparent Data Link
The TXL2 and RXL2 modules are 9600baud simplex multi channel OEM radio industrial modems, operating on the European 433MHz ISM Band.
The TXL2/RXL2 pair act as a transparent serial professional cable to attached host. The TXL2/RXL2 will take care of preamble, synchronisation, bit balancing and error checking, along with automatic noise squelching.
Features
· Conforms to EN 300 220-3 and EN 301 489-3
· Serial modem baud rate at 9600bps (simplex)
· Addressable point-to-point
· 5 serial select wideband channels
· Transmit Power: +10dBm (10mW)
Applications
· In professional building environmental monitoring and professional control
· Remote professional data acquisition system, data logging |
|
Multi channel radio transmitter and receiver
The unique and compact CDP-TX/RX-02E-R is a frequency selectable radio data module for the 434MHz UHF band. Both CDP-TX-02E-R (transmitter) and CDP-RX-02E-R (receiver) are equipped with a frequency professional synthesizer system including microprocessor. 32 RF channels are selectable using an onboard 4-bit switch.
A 458 MHz version is available with 11 channels.
Its small size, low voltage operation, and frequency selectability make CDP-02E ideal for various applications in sites where many radio industrial transmitters are operated.
8-pin frequency selection is available as CDP-TX/RX-02EP-R. |
|
These modules enable an economic single-way AM/FM digital link over a range of 4km.
They are used as an asynchronous serial channel where the useful data rate ranges from 0.5 à 10Kbps Manchester.
These modules (miniature daughter board to be integrated) are available in 3 versions
* 433/434MHz – 10mW
* 869.525MHz – 25mW et
* 869.525MHz – 500mW
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from industrial radio remote control of gates, industrial roller blinds, point to point transmission, micro-networks ... in general public or tertiary sectors of activity, home automation, access control, alarm ...
They also can be useful in all applications requiring long range or in a particular disturbed environment.
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
- LOGICAL I/O TRANSFERS :
Professional transmitter : 8 logic inputs
Receiver : 8 static outputs or 4 relay outputs (it is possible to have 2 professional pcs
4 relay professional receivers + 1 transmitter working together)
Permanent or momentary radio link
7 groups of 3 frequencies (for the version with "high immunity to
interferences") or 8 frequencies
Range : 300 m (in unobstructed area)
Response time : 100 ms
Supplier of power supply : 10 to 30 Vdc
Relay output receivers : 12 to 30 Vdc
Metal housing
IP 65
- ANALOGUE I/O TRANSFERS :
Transmitter : 4 inputs in 8 bit resolution or 3 inputs in 10 bit resolution
Receiver : 4 outputs in 8 bit resolution or 3 outputs in 10 bits, static PNP,
4-20 mA/0-5 V compatible.
Permanent radio link
7 groups of 3 frequencies (for the version with "high immunity to
interferences") or 8 frequencies
Range : 300 m (in unobstructed area)
Maximum frequency of use : 3 Hz
Power supply : 10 to 30 Vdc
Metal housing
IP 65 |
|
Functional principle:
The PLICSRADIO series is used for easy wireless transmission of4 ... 20mA/HARTsignals andswitchingconditions. An emitting unit receives the measured values and can be also used as (Ex) supply for sensors connected via cable. Individual 4 ... 20 mA/ HART sensors of any manufacturer can be connected. A receiving unit receives the measured values via a radio link and transfers these to a 4...20mA output or a processing unit, depending on the version. In addition, an indicating unit located within the radio range can show the requested measured values. |
|
ADI offers a variety of transceivers for wireless applications. The Othello® family of direct conversion radios offers numerous benefits to developers of GSM, GPRS and EDGE terminals such as best-in-class performance and significant BOM savings. The ADF702x family is well-suited for audio, cordless phones, video over ISM, low-rate connectivity, security systems and automatic meter reading, featuring low power and minimal external components. In addition to the Orthello family, ADI also offers the WiMAX family of RF transceivers which offer a complete RF and mixed-signal system on a chip.
|
|
| High-frequency SiGe, BiCMOS, and bipolar processes make Maxim your source for low-power, low-cost, high-performance, complete system solution RF ICs for wireless, RF, and cable applications. |
|
YLX-TRM8053-500-05
Long Range 500mW Industrial radio modem 868-870MHz ISM Band
Compact YLX-TRM8053-500-05 Radio Industrial modems can replace easily miles of cable in industrial applications. Using FHSS, TDMA or FDMA protocol, the YLX-TRM8053-500-05 resists to interference and enable co-located client and network operation without degrading data integrity and range performance. The YLX-TRM8053-500-05 offers a large number of on-the-fly commands, providing a high level of flexibility for any application.
Features
* 868 - 870MHz Free license band
* Fully assembled and tested
* UART or SPI interface
* Embedded protocol
* Up to +27dBm into a 50 Ohm load
* Data rate up to 152.3kbps NRZ coding
* 75x29x5mm Size
* Low current consumption:
* 20mA in Receiver mode
* 650mA in Professional transmitter mode at 27dBm
* High reception sensitivity:
* down to -114dBm at 4.8kbps
* down to -105dBm at 76.8kbps |
|
This system enables two-way half duplex digital links over a range of up to 6Km.
It is used as an asynchronous serial channel where the useful data rate ranges from 0.2 kBps to 50 kBps Manchester.
These systems offer 9 transmission channels
These modules (miniature daughter boards to be integrated) are available in 4 versions
* Monochannel 433MHz / 868MHz or 915MHz
* 8 channels 433MHz - 10mW
* 9 channels 868MHz
* 1/2/5 channels 868MHz - 500mW for long range applications
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from point to point transmissions, industrial professional remote controls, remote sensors to cordless local networks... in both industrial sectors of activity: robotics, remote control, and in general public or tertiary fields: access control manufacturers, home automation...
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
PERFORMANCE
Power Output: 27~30dBm
RF Line-of-sight Range: 2000m@1200bps,1000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps
Receiver Sensitivity: -118dBm@1200bps,-114dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <450mA@27dbm,<500mA@30dbm
Receive Current: <45mA
Sleep current: <5μA
Frequency Band: 868MHz(Default),820MHz~960MHz(customized)
Channel: 8(Default),16/32 (customized)
Interface: TTL/UART, standard RS232 and RS485
Size: 78mm×56mm×15mm
Weight: 45g
Professional antenna Base: 50Ω
Operating Temperature: -35℃~+80℃(TCXO industrial crystal)
Frequency Stability: ±2.5ppm |
|
869MHz Wide Band FM Radio Professional transceiver
The BiM3B radio transceiver module is an enhanced higher power replacement for the European version BiM3A-869-64.
Two frequency variants are available in the European unlicensed band, one with 5mW RF power with no duty cycle restriction, the other with 25mW RF power with 1% duty cycle restriction.
Features
- Complies with European harmonised professional standards EN 300 220 and EN 301 489
- RF power output: +14dBm (25mW)
- Data rates up to 64kbps
- Industrial crystal controlled PLL FM circuitry for both Tx and Rx
- Professional receiver Sensitivity: -101dBm for 1ppm BER (64kbps)
- Usable range up to 300 metres external, 75 metres in professional building
- RSSI (standard) or carrier detect option
- Analogue and digital baseband
- Low professional profile with small footprint
|
|
Order Code Z-LINK:
- Supply: 12 Vdc net supplying
- Dimensions: 25 x 68 x 25 [mm]
- Assembly on DIN guide 42677
- Comunication: RS232, RS485, Half duplex, 434 (868 opt.) MHz, 10 mW, 100 Kbps
|
|
| AUREL RF professional receivers are produced in accordance to RoHS European Directive and are identified with a -G- suffix to Manufacturing Code (Ex. 650200609G). |
|
Features :
- Professional laser Class 1
- Compliant with Small form Factor Pluggable MSA Specification
- Compact Size (13.3 x 49.8 x 9.8 mm / 0.52 x 1.95 x 0.39")
- Compliant with Industry Standard RFT Electrical interconnector and Cage
- Available with either button release or bail release latching mechanism
- High-Performance and Cost-Effective
- Single +3.3 V Supplier of power supply and TTL Logic Interface
- Low Power Consumption
- Metal Package for Superior EMI Performance
- EEPROM with Serial ID Functionality
- Enhanced Monitoring Functionality (Digital Diagnostics per SFF-8472 available)
- Standard and Wide Operating Temperature Ranges
Applications:
- SONET/SDH from 155 Mbit/s to 2.7 Gbit/s (OC-48, OC-12, OC-3, and STM-14, STM-4, STM-1)
- GbE (GbE-SX, GbE-LX, and GbE-ZX)
- FC (1GFC and 2GFC)
- Transmission distances from 500 m to 100 km
- Metropolitan and access systems
- IP professional routers and ATM core switches
- DWDM for Metro Area Networks |
|
| Designers can easily add cost-effective, short-range wireless data features to their products using the Toshiba family of low-power, high-sensitivity, single-chip radio transceivers and receivers. The devices offer frequency bands of 240 to 450 MHz, 900 MHz and 2.4 GHz. Each device is engineered to enable flexible and customized system designs reducing end-product and manufacturing costs. |
|
YLX-TRM8053-500-05
Long Range 500mW Industrial radio modem 868-870MHz ISM Band
Compact YLX-TRM8053-500-05 Radio Industrial modems can replace easily miles of cable in industrial applications. Using FHSS, TDMA or FDMA protocol, the YLX-TRM8053-500-05 resists to interference and enable co-located client and network operation without degrading data integrity and range performance. The YLX-TRM8053-500-05 offers a large number of on-the-fly commands, providing a high level of flexibility for any application.
Features
* 868 - 870MHz Free license band
* Fully assembled and tested
* UART or SPI interface
* Embedded protocol
* Up to +27dBm into a 50 Ohm load
* Data rate up to 152.3kbps NRZ coding
* 75x29x5mm Size
* Low current consumption:
* 20mA in Receiver mode
* 650mA in Professional transmitter mode at 27dBm
* High reception sensitivity:
* down to -114dBm at 4.8kbps
* down to -105dBm at 76.8kbps |
|
PERFORMANCE
Power Output: 500mW@5V(Default), 1W@9V(customized)
RF Line-of-sight Range: 4000m@1200bps, 2000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps optional Receiver Sensitivity: -124dBm@1200bps, -118 dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <400mA@500mW, <500mA@1W
Receive Current: <40mA
Sleep Current: <5µA optional ex-factory
Frequency Band: 433MHz(Default)
400MHz~470MHz(customized)
Channel: 8(Default), 16/32 (customized)
Default Interface: COM1:TTL/UART,COM2:Non-Standard RS232 or RS485
Size: 53mm×38mm×10mm
Weight: 34g
Antenna Base: 50Ω
Operating Temperature: Industrial: -35℃~+80℃(TCXO industrial crystal)
Commercial: -20℃~+60℃
Frequency Stability ±2.5ppm Industrial
±10ppm Commercial |
|
opens and closes professional doors and gates
low energy consumption and radio emission
actuation by pull-wire
also for outside applications,sensing range 300 m
sensing range inside 30 m |
|
| SATIMO Multiprobe systems were until 2005 only available in the 0.4-6 GHz frequency band. Since 2006 the same speed advantages can be enjoyed by customers working from 70 MHz all the way up to 18 GHz thus making Multiprobe technology the choice for any application from wireless to automotive to defense and space. The full range of SATIMO probes family is available... |
|
FM selective repeaters and radio communication services in confined surroundings
The FM03 and RCOMM03 repeaters are the latest of our innovations and are the 3rd generation of the ARF41 range, made up of FM selective repeaters / Industrial transmitters of emergency multi-messages and selective Repeaters / Professional amplifiers for Radio communication services.
Depending on the versions, these systems receive radio broadcast programmes continuously, together with the broadcasting of multiple emergency messages or the extension of radio cover in confined surroundings (Tunnels, car parks, the Metro, buildings, etc.).
Each repeater is active over an entire FM 87-108 MHz band for the FM03 or analogue 66-88MHz Radio communication, RUBIS, analogue 146-174MHz, TETRA, TETRAPOLE, analogue 440-470MHz for the RCOMM03.
The configuration is carried out by the on-board http server accessible by a standard web browser (Internet Explorer, Firefox, etc.).
Supervision is based on the SNMP/IP protocol.
In accordance with the new European regulations, the FM03 repeaters make it possible to repeat and FM channel on several channels and if necessary insert separate emergency messages on each channel.
RCOMM03 Radio communication repeaters are available in Duplex or Simplex versions.
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
The RPC2A-433-64 is an intelligent professional transceiver
module, which enables a radio network/link to
be simply implemented between a number of
digital devices. The module combines a UHF
radio transceiver and a 64kbps packet
professional controller.
It is a self-contained plug-on radio port which requires only a simple professional antenna, 5V supply and a byte-wide I/O port on a host
microcontroller (or bi-directional PROFESSIONAL PC port). |
|
SATIMO Dual Ridge Horns combine uniform gain and low return loss performance with wide band frequency operation.
The SATIMO horns have been used extensively in international facility comparison campaigns as high reliability reference professional antenna. The horns are supplied with high accuracy performance data.
|
|
|
Wireless communication network equipment
