|
|
The space-saving communication-solution for technical installations.
Modem / SMS Alarm-Messender
All “CombiLine” models became developed specially for industrial surroundings and they are corresponding to the most currently data-transmission-norms.
With the help of the included software package, the modules will be configured easily over the COMinterface.
8 alarm-signal-inputs, 2 switchable signal-outputs.
By activation the input lines, faults will be announced by sending an SMS message and displayed on a mobile phone, voltage breakdowns will be indicated as well.
While power interruption, the modules remain in operation by using an optional built-in NiMH accumulator.
|
|
|
|
|
|
Anybus RemoteCom enables remote management of industrial equipment from a standard web browser. By providing fast and accurate information at any time and place, RemoteCom helps to minimize equipment downtime, unnecessary travel of service personnel, helping to secure our natural environment.
With Anybus RemoteCom, HMS Industrial Networks provides a complete new product series for remote visualization and control of industrial devices and machinery. Anybus RemoteCom is an easy-to-use web gateway. RemoteCom acts as a Modbus bridge and gives remote access and control of serial devices over Ethernet, Internet, LANs, GSM, GPRS and telephone modems.
RemoteCom contains built-in features for alarm handling (SMS, E-mail, SNMP), data logging and web-based data access. RemoteCom has a powerful embedded webserver for visualization of the device data that can be accessed from any standard web browser. The user can easily and securely access devices from anywhere at anytime.
In addition to the visualization and diagnostic functions, RemoteCom provides the ability to remotely control devices. RemoteCom enables authorized users to select and modify device parameters such as, target values or operation mode.
The network configuration of RemoteCom is easy and made via the inbuilt webserver. The webserver is also used to setup the serial Modbus connection to the industrial device or machinery. Pre-defined device templates supplied with RemoteCom ensures a fast and easy setup. No programming or windows tools required!
As an additional service, a secure online management server is available that expands the functionality of Anybus RemoteCom.
|
|
Double Ridge Guide Horn Antennas
Broadband antennas, compared to half wave dipoles, reduce test time because the technician did not have to stop the test to adjust the dipole antenna for each frequency. Most compliance standards now require the use of such antennas. The latest version of Mil-Std 461E states the used of broadband double ridge guide horn antenna as the antenna of choice for frequencies above 200 MHz.
A.H. Systems Double Ridge Guide Horns are broadband antennas that offer excellent performance over the frequency range of 170 MHz to 40 GHz. These Horn antennas are an excellent choice for both radiated immunity and emissions testing. Here are several double ridge guide horn antennas ideal for most compliance standards and/or general field measurements.
|
|
|
|
|
|
By giving you the option to design and build custom application-specific antennas, Spectrum Advanced Specialty Products goes one step farther in helping you find the ideal antenna to ensure wireless reception of your system. Vertical integration allows for a wider range of materials in the manufacturing process, which deliver prototypes and production volumes in shorter lead times. Our antenna specialists use sophisticated simulation software and in-house testing to optimize your antenna, resulting in a high performance antenna built just for you.
In addition to our custom antenna solutions, we offer a complete line of patch antennas. When dealing with critical patch antenna issues such as board layout, ground plane size, mounting methods and port measurement, Spectrum’s engineering team is ready to help identify the best antenna choice for maximum efficiency. We look at everything from polarization to frequency tolerance to determine the ideal patch for your design. And our flexible manufacturing and testing processes allow us to easily accommodate the required adjustments to supply an optimized antenna.
• Variety of antenna types, including: Aperture, Slots, Loops/Magnetic Dipole, Planar, Helical, Beam Forming-static, Custom Networks and Switched Arrays
• Available in partial assembly to complete “Plug-n-Play” assemblies
• RoHS compatible parts available
• Low VSWR
• Frequency ranges within -300MHz to 6GHz
|
|
OmniLOG® 90200
700MHz-2,5GHz
The OmniLOG® 90200 Antenna is specially developed for a quasi isotropic (radial isotropic) measurement in the GSM (GSM900, GSM1800, GSM1900), UMTS and 2,4GHz WLAN frequency ranges.
The OmniLOG antenna offers the possibility for a direct, radial measurement of field strength without the need to move the antenna to the source. This offers the possibility to get a direct field strength reading without any hassle.
It´s extremely small size allows measurements without attracting attention or even for covert measurements. Every OmniLOG Antenna offers a high-grade SMA connector.
- Highly isotropic from 700MHz to 2,5GHz
- Optimal for usage with spectrum analyzer for radial isotropic measurements
- 90° knuckle base with SMA connector
- Small weight and very small dimensions
- 10 years warranty
|
|
RF antennas for wireless applications, ideal for gate door openers, burglar alarms, car alarms, personal security, home security, remote controls, bluetooth, Wi-Fi.
The antenna system is essential to have the best performances from a transmitter and a receiver, as all technical characteristics given out from data sheets are normalized assuming an antenna impedance at 50 Ohm. Efficiency of energy radiation is directly correlated to antenna efficiency.
With limits imposed from available space, several types of antenna can be used, characterized by different levels of efficiency.
Below, antenna systems are presented, in order of increased efficiency. Details are given assuming a work frequency on 434 Mhz band.
|
|
RF Solutions provide a wide range of high quality antenna:
* Passive and High Gain Antenna
* Flexi 1/4 Wave, Helical, Puk, Embedded, Dipoles and Yagi
* Rugged High Quality Finish
* Available with a range of fixings
* Low Noise Amplifier Modules
|
|
|
|
|
|
868-870MHz helical right angle 50 ohm antenna with Reverse Polarity (no pin) SMA connector designed for our family of Wi.232XXX European radio modules. These antennas are designed to ETSI/CE certification approval for all our 868MHz European modular products. These antennas were certified with our FCC modular approved radios. This antenna supports the European family of Radiotronix Wi.232XXX embedded modules operating in 868-870MHz frequencies.
868-870 MHz FCC certified LONG RANGE ½ wave Dipole 50 ohm antenna with Reverse Polarity (no pin) SMA connector designed for our family of Wi.232XXX radio modules. These antennas are designed to meet FCC certification approval for all our modular products. This 2dBi high gain antenna is designed for longer range modules.
902-928MHz helical straight 50 ohm antenna with standard polarity (pinned) SMA connector designed for our family of Wi.232XXX radio modules. These antennas work with our standard polarity evaluations modules, Wi.XXXX-EVMs, that are supplied in our development kits and also sold separately.
902-928MHz ¼ wave whip 50 ohm antenna with standard polarity (pinned) SMA connector designed for our family of Wi.232XXX radio modules. These antennas work with our standard polarity evaluations modules,Wi.XXXX-EVMs, that are supplied in our development kits and also sold separately. This is the standard antenna shipped with all our development kits in the 900MHz frequency. This antenna supports 902-928 MHz frequencies and all Radiotronix Wi. Family of embedded modules.
902-928MHz 1/2 wave LONG RANGE Dipole 50 ohm antenna with standard polarity (pinned) SMA connector designed for our family of Wi.232-XXX-EVM-R radio modules. These antennas work with our standard polarity evaluation modules that are supplied in our development kits and also sold separately. This 2dBi high gain antenna is especially recommended for our long range module, Wi.232FHSS-250-R. This antenna supports 902-928MHz frequencies.
|
|
|
|
|
|
JB Series 30 MHz - 6 GHz:
JB Series antennas are compact, high-performance instruments designed for EMC emissions and immunity testing. The broadband characteristics of these antennas enable them to operate over a wide frequency range - a must for automated test environments. Innovative design and manufacturing techniques result in long-lasting strength and mechanical integrity. The result is an electrically stable measuring instrument that maintains calibration over extended use.
The antenna boom is made from a custom aluminum extrusion that reduces the number of parts at the nose. The result is a stronger, more stable feedpoint and excellent cross-polarization properties. The unique shape allows for a larger feed cable to be used, which significantly increases the maximum power rating. Dipole elements are permanently attached to the boom by an assembly technique that maintains excellent electrical characteristics for the life of the antenna.
The low-frequency wings are swept forward and turned in at the ends to reduce ground plane coupling while maintaining performance. Each wing is attached with dual compression fittings for true alignment. A tough powdercoat finish with UV inhibitors seals the aluminum structure and protects it from sunlight and moisture.
|
|
Product Highlights:
Antenna Style = Embedded Antenna
Voice Application
Antenna Type = 800 MHz Cellular
824 - 894 MHz Operating Frequency
Mount = Tab
|
|
Portable radio antennas are used for wireless two-way communication with civil service, military, and construction organizations; with many custom applications.
Established in-market presence and innovative molding techniques, with verified platforms and a variety of connection options adds to the reputation for rugged reliability in hazardous situation and harsh environments for these antennas.
Laird Technologies' portable radio antennas are the world standard for reliable flexible ("Rubber Duck") antennas. These antennas are used with all popular portable radios in use by police, fire, militray and private users; and provide excellent communication in any location, environment, or condition. Tuf-Duck® and patented Sable antennas are included in this product line. Each antenna can be individually tuned to frequency to ensure optimum performance.
|
|
THE LÜNEBERG ANTENNA
Luneberg lenses are used in microwave communication.
Luneberg lenses can be excited by one or several feeds, providing multi-feed antennae with extremely high directivity and high theoretical gain G, equivalent to the gain of a parabolic antenna of similar diameter.
APPLICATIONS
- On-board antenna: plane, train, boat, car, ...
- Microwave communication, high outflow Internet.
- Communication toward several fixed or mobile antennae (satellites...)
- Land communication relay station.
|
|
A.H. Systems offers 9 models of portable antenna kits. Each kit provides all the reliable antennas, current probes and accessories needed to satisfy a wide array of customer requirements. Each component has a specific storage compartment in the carrying case therefore, loss and breakage are virtually eliminated. Cables, a tripod with azimuth and elevation head and a tripod carrying case accompany each antenna kit. see our website at www.AHSystems.com
|
|
|
|
|
|
Pasternack introduces it's new series of LMR (Land Mobile Radio) Antennas for Mobile Applications to fill filling a wide range of antenna requirements in wireless, telecommunication and radio applications. All products conform to the Telecommunication Industry Association (TIA) standards for terrestrial land mobile radio antenna manufacturers (TIA-804-A ./ TIA-804-B).
Pasternack's series of LMR Antennas are broad-based, wideband antenna solutions that operate over a wide range of frequencies. These products are designed for maximum durability under severe operating conditions. A wide range of styles allows users to select the right package and tuned frequency operation to satisfy virtually any LMR application. Operating frequencies range from 40~1990MHz and offer 150~200 Watts of power.
All products are in full production and stocked at the factory to support same-day shipment. Pricing is as low as $8.76 for 100 pieces of a Field Tunable Mobile Antenna rated for 118~940MHZ and 150W operation. Use Pasternack's on-line selection guide for complete specifications at www.pasternack.com. For additional support, contact Pasternack by phone at (866) 727-8376 or by email at sales@pasternack.com
|
|
Antennas for SATELLINE Radio Modems
We can offer following antenna types for your solutions:
* Half Wave Antennas for frequencies 400 ... 470 MHz and for 869 MHz (for SATELLINE-1870 modems) for short distances
* Quarter Wave Antennas for frequencies 400 ... 470 MHz, for 869 MHz (for SATELLINE-3AS 869 modems) and for 140 ... 174 MHz (for SATELLINE-3AS VHF modems) for short distances
* Helix Antennas for frequencies 400 ... 470 MHz and for 140 ... 174 MHz (for SATELLINE-3AS VHF modems) for short distances
* Directional Antennas for frequencies 370 ... 470 MHz, for 869 MHz (for SATELLINE-3AS 869 modems) and for 140 ... 174 MHz (for SATELLINE-3AS VHF modems) for long distances
* Omnidirectional Antennas for frequencies 370 ... 470 MHz, for 869 MHz (for SATELLINE-3AS 869 modems) and for 140 ... 174 MHz (for SATELLINE-3AS VHF modems) for long distances.
|
|
In a HF product, the antenna plays an essential role: it's the most important link of the chain.
A quarter wave antenna, without its ground plan, will behave practically as a wire, but when its ground plan is sufficient, its efficiency will be maximal.
The antenna must be placed always in high position and clear from all metallic obstacles.
The antenna cable is another important element not to be neglected. Depending on the type of cable used, the loss in dB will be more or less high.
We bring you our advises for all your needs in wireless transmission and radio systems, with our product range for a variety of applications. We can also design radio systems according to your specifications.
|
|
|
|
|
|
HUBER+SUHNER designs and manufactures an extensive product portfolio of directional and omni directional antennas for various wireless applications for the communication, transportation and industrial markets. The HUBER SUHNER product portfolio includes Antennas for
- Indoor DAS
- WiFi coverage for office, industrial and warehouse
- RFID portal and forklift antennas
- WiMAX base station, backhaul and subscriber CPE equipment
- Vehicle-mounted exterior and interior antennas for public transportation.
The know-how and many years of design experience gained by HUBER SUHNER antenna engineers allow us to provide the optimum solution for your specific requirements. Besides a wide standard product portfolio, we offer customized solutions to your need. We frequently include an antenna solution inside a customer defined (Industrial Design) housing. Thanks to these skills in wireless communication, it goes without saying that we offer all customers essential support in project co-ordination and after-sales support.
|
|
|
Cushcraft's integrated diversity antenna designs feature two separate 2 dBi omnidirectional radiating elements sharing a common backplane and enclosure. The radiating elements are terminated with coaxial pigtails and MMCX connectors that exit the backplane of the antenna. Hence, they can interface with an access point that has been mounted in the plenum above the ceiling if so desired. The complete package dimensions are 5.25" x 2.75" x .75". Both coax length, connector type and package aesthetics can be modified to meet customer requirements. Offices, HealthCare facilities, educational or industrial campuses and shopping malls are just a few of the more common applications for these antenna designs.
|
|
* Antenna Style = Embedded Antenna
* Application = Bluetooth
* Antenna Type = 802.11b Lead Free
* Operating Frequency = 2,400 - 2,500 MHz
* Mount = Surface Mount
|
|
State-of-the-art computer-aided RF design and Yageo's renowned Phycomp branded multilayer-ceramic and resistor-chip technologies are combined in the worlds smallest BluetoothTM * antenna. Measuring only 7.3 X 5.5 X 1.4 mm yet packing in the full antenna functionality essential for Bluetooth and wireless-LAN communications.
Yageo's new Phycomp multilayer-ceramic antenna is ideal for use in the 2.4 GHz ISM band. Targeting the coming world without cables based on the Bluetooth protocol enabling electronic devices to communicate with each other without wires or user intervention. Helping to bring computing power and the power of communications and the Internet into our daily lives.
|
|
|
|
|
|
Class 2 Bluetooth® module for Data or Audio transmission
This miniature module enables full duplex Bluetooth® data or audio transmissions over 20m.
It uses the international 2.45 GHz frequency band as described by European Directive RTTE / EN300-328 / EN301-489 and US FCC part 15.This module is Bluetooth V2 “End Product” certified, meaning users are able to directly use the Bluetooth® logo. Data transmission and configuration are both managed through UART-type TTL serial interface. The air rate is 723kbps. Miniature antenna is included.
When using “Data” version, serial connection with every PDAs, laptops, GSM Bluetooth® devices become possible through the embedded SPP profile ; a PC/PDA can have a remote COM port added. A mobile phone can be used as a GPRS or SMS modem...
Audio versions also offer an SCO connection that supports HFP*, HSP** and HSAG Audio Gateway profiles; the Audio Gateway module can directly link with every Bluetooth headset on the market. On mobile site, a hands-free headset can be designed by simply adding a microphone and earphone.
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information: http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77
|
|
|
|
|
|
This miniature module enables two-way Bluetooth® transmission over a range of 150m.
It uses the 2.45GHz world frequency band according to the European directive RTTE EN300-220 / EN301-489.
This module is fully compliant with the Bluetooth V2.0 EDR (Enhanced Data Rate) standard.
Its "air" data rate goes up to 3Mbps, if EDR mode is supported on both sides. Data transmission and setup are performed via a standard or complete UART serial interface.
The miniature antenna is integrated on the PCB. The module is available as Stand-alone modules or in DemoKit.
This product covers the following applications :
- payment terminals ;
- trucks geolocalisation ;
- data transmission for environment.
The major advantage stems from the fact that this module is fully compatible with PDA's, laptops and Bluetooth® GSMs.
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or 33 (0) 4 76 92 07 77
|
|
Bluetooth Module Class2
AMB2300 - BlueNicecom IV
* Bluetooth radio module (Class 2)
* Bluetooth 2.0 specification
* Digital AUDIO interface (PCM interface)
* Integrated profiles: SPP, GAP, SDAP
* Supported profiles: DUN, FAX, FTP, HSP, HFP, OPP, SYNC, BIP, BPP
* Small form factor
* Integrated chip antenna
* UART interface with programmable baud rate
* Quick-Start Evaluation Kit available
* EN 300 328 com
|
|
Bluetooth, ZigBee & WiFi
* Wireless Data Comms
* Onboard Encryption
* Bluetooth, Zigbee and WiFi 802.11b Protocols
* Ideal for Rapid and Reliable System Design
|
|
The LogPer-Antenna of the HyperLOG® series 3000 are based on an ultra-thin, GOLD COATED high tech TEFLON substrate. Based on this innovative construction, the frequency range could yet again be vastly extended compared to the 4000 antenna-series. The lower frequency range now reaches down to 380MHz, thus covering, for example, the important TETRA band (380MHz and up). The extended upper frequency range up to 18GHz now also allow measurement of unusable signal sources like military radar, various satellite services, and more. Combined with a spectrum analyzer, an incredible EMC measurement system for mobile or laboratory use is formed, at an affordable price. As an option, the antenna-calibration-data can even be stored on a special IC on the antenna and be queried with our spectrum-analyser-series at any later time. What more can you ask ?
Shipped including EMC-Antenna, typical CALIBRATION DATA, detachable pistol grip and aluminum case.
|
|
The WTMC is a radio receiver that can acquire data from the TempStick Radio, the wireless transmitter with temperature sensor. The received data are sent via Ethernet to the PC where the management software (like the FridgeLog) is installed per storing. The WTMC has a memory too where it can save some data, in case the Ethernet connection is down for a while. Each WTMC can receive up to 32 sensor-transmitter: to each one of them an IP adress is assigned and many WTMCs can communicate on the same network, according to your needs. The WTMC is provided with its power supply. The WTMC is configured through the Ethernet connection with the WTLS2FL software, provided with the FridgeLog.
Applications:
- stock houses and warehouses monitoring;
- fridges and fridge cells monitoring;
- environment monitoring;
- computer rooms control;
- laboratories monitoring;
- HACCP compliance temperature monitoring;
- ISO compliance temperature monitoring.
|
|
|
|
|
|
ARF62 - Class1 Bluetooth® RS232 Dongle
* Bluetooth® V2 stack – Bluetooth® certified
* Compact design, available in DCE/DB9 femelle – DTE/DB9 ou DB15HD mâle versions
* Full RS232 serial port profile
* Profiles GAP, SDAP, SPP, DUN
* Air rate up to 115.2 kbps
* Range 150m
* Applications : Wireless connection of any devices with RS232 serial port profile (Notebook, PDA, fax, printer, RTC/GPRS modem …)
Success story
This can be used, for example, for setting up a system to monitor PLCs in a building at some distance from the factory.
The RS232 wired connection between the PLCs and the modem is replaced easily using a transparent wireless Bluetooth® transmission.
Communication is set up using the female Bluetooth® DCE/DB9 dongle for use with the PLCs, which offers a wireless connection to a modem connected to a male Bluetooth DTE/DB9 dongle.
This configuration makes it possible to send instructions and to return to the alarm status in the monitoring centre found in a nearby building.
ARF62 is useful due to its DUN profile that ensures the transfer of all control signals of a complete RS32 beyond serial transmission.
|
|
|
Wireless interface products provide a cost effective alternative to expensive hard wired connections. The wireless product provides continuous, 24/7 communication using the FCC licenses free 900MHz frequency. Using Frequency Hopping Spread Spectrum (FHSS) technology, a robust signal is provided that is virtually free from disruption due to interference. This technology has been proven in thousands of installations worldwide.
|
|
Wireless I/O solutions from Phoenix Contact offer flexible and reliable data transmission for your applications. Monitoring and controlling your processes is reliable with point to point, and multipoint to point industrial radios.
These industrial radios can be incorporated into controlling pump stations, monitoring tank levels and sensors as well as a variety of additional industrial applications.
|
|
This system enables two-way half duplex digital links over a range of up to 6Km.
It is used as an asynchronous serial channel where the useful data rate ranges from 0.2 kBps to 50 kBps Manchester.
These systems offer 9 transmission channels
These modules (miniature daughter boards to be integrated) are available in 4 versions
* Monochannel 433MHz / 868MHz or 915MHz
* 8 channels 433MHz - 10mW
* 9 channels 868MHz
* 1/2/5 channels 868MHz - 500mW for long range applications
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from point to point transmissions, industrial remote controls, remote sensors to cordless local networks... in both industrial sectors of activity: robotics, remote control, and in general public or tertiary fields: access control, home automation...
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77
|
|
|
|
Wireless communication network equipment
