|
|
The TH71112 FSK/FM/ASK double-conversion superheterodyne receiver IC is designed for applications in the European 868 MHz industrial-scientific-medical (ISM) band, according to the EN 300 220 telecommunications standard. It can also be used for any other system with carrier frequencies ranging from 750 MHz to 990 MHz (e.g. for applications according to FCC part 15).
|
|
| FM (FSK/ ASK) Super-het low cost receiver of modulated digital data, working at 433.92 MHz frequency. High selectivity and sensibility obtained by SAW filter. Output voltage is low when no carrier is on air. |
|
World smallest ceramic GPS chip antenna
11mm x 1,6mm x 1,6mm
also available for Bluetooth and W-Lan applications |
|
Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. As part of the CellAirityTM Mobile Platform, Broadcom offers a family of HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) baseband processors for use in cellular handsets, PC cards and other wireless-enabled consumer electronics.
|
|
| The A.H. Systems' set of H-Field Rods provide an accurate standard for magnetic field testing. The rods are available individually or in a set of four to cover the frequency range of 100 Hz to 30 MHz. For those situations when improved sensitivity is desired in magnetic field testing, the H-Field Rod is an effective alternative to traditional loop antennas. One amplifier pre-assembled to a metallic ground plane covers the entire frequency range and can be used with any or all of the H-Field Rod elements. Visist our website for more information. www. AHSystems.com |
|
High precision dual polarization near field measurement systems place stringent performance requirements on the probe performance in terms of pattern shape, on-axis and off-axis polarization purity, return loss and port-to-port isolation.
SATIMO has developed different families of high performance dual polarized probes covering the entire range from L to Ka band. Due to the extensive use of balanced feeding techniques, all probe designs have outstanding bandwidth.
|
|
FEATURES
- Compatible with IEEE 802.3u Fast Ethernet data communications standard
- Logic interface compatible with both LVDS (Low-Voltage Differential Signaling) and CML (Current-Mode Logic)
- Integrated CMOS driver IC
- Resonant Cavity LED at red 650 nm with small emission aperture suitable for POF
- Resonant Cavity LED reliability tested to over 400,000 hours lifetime
- High sensitivity receiver IC and pin-diode for one-step light to digital conversion
- Integrated optics to efficiently focus and direct light
- Low power consumption
- Optimized for high-speed Fast Ethernet of 125 Mbps |
|
| A.H. Systems' offers 13 Log Periodic Antennas. Each antenna is lightweight, compact, rugged and has been manufactured to ensure maximum gain, low VSWR and high power handling capabilities. Whether testing inside a shielded enclosure or outdoors, the antennas will display efficient performance characteristics through the broad frequency range of 80 MHz to 7GHz. Visit our website for more information. www.AHSystems.com |
|
Our Log Periodic Antenna series are calibrated broadband antennae enabling the direct measurement of field strength over the full radiated emissions spectrum up to 3GHz.
The BTA-series of antennae are used for radiated emission and immunity testing. They come fully calibrated and capable or handling up to 1kW of power.
These antennae are used for emission testing for CE, FCC, Automotive standards, and Military standards.
|
|
A.H. Systems' designs, manufactures and delivers high performance Loop Antennas for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6 or individually to satisfy specific requirements, the Loop Antenna is an efficient, low cost solution. www.AHSystems.com
|
|
The RF300 is a fully compliant, calibrated 2 meter loop antenna manufactured to comply with European product specific standard EN55015 section 7.2 and annex B (EN55015 is specific to luminaires).
The calibrated frequency range of the RF300 is 9 KHz to 30 MHz and each antenna is supplied with antenna factor data so that it can be used with any EMC receiver or spectrum analyser capable of antenna factor compensation.
|
|
Broadband antennas, compared to half wave dipoles, reduce test time because the technician did not have to stop the test to adjust the dipole antenna for each frequency. Most compliance standards now require the use of such antennas. The latest version of Mil-Std 461E states the used of broadband double ridge guide horn antenna as the antenna of choice for frequencies above 200 MHz.
A.H. Systems Double Ridge Guide Horns are broadband antennas that offer excellent performance over the frequency range of 170 MHz to 40 GHz. These Horn antennas are an excellent choice for both radiated immunity and emissions testing. Here are several double ridge guide horn antennas ideal for most compliance standards and/or general field measurements. Visit our website for more information. www.AHSystems.com
|
|
| Pasternack's Standard Gain Horns are ideally suited for EMI testing, direction finding, surveillance, antenna gain and pattern measurements and other applications. The waveguide bands start at 1.70 GHz and operate to 40 GHz. |
|
| These products are complete two-chip modems designed for quick network access for devices with limited data transmission requirements. The below ISOmodem products utilize Silicon Laboratories' proprietary silicon DAA and support caller ID detection and decode and parallel handset intrusion detection. |
|
| Our Monopole Antennas provide superior performance in electric field measurements. The Active Monopole Antenna can drive any receiver with 50W input impedance and will perform FCC, MIL-STD and TEMPEST tests. The passive rod is used for transmitting, to perform shielding effectiveness and immunity testing. PLease visit our website for more details. www.AHSystems.com |
|
Long distance UART TTL Module
This module enables a two-way digital link up to a range of 6000m.
Available in the 869MHz or 902/928MHz in FHSS (Frequency Hopping Spread Spectrum) bands, these pre-certified module-modems usable without a licence can be qualified in compliance with the RTTE European Directive EN 300-220 / EN 300-489 and the FCC Part 15.247 American standard.
It is considered as a complete radio solution which integrates a digital radio transceiver, a microcontroller, a dedicated firmware.
Data transmission is performed via a UART serial interface.
Its easy integration even for non RF specialists, allowing a high reduction of technologic risks and costs and a « Time to market » optimization.
It covers most applications requiring long-distance communication, automatic watering control system, long distance GPS data transmission, yachting autopilot, fireworks launching system, modular remote control system, modular radio
telemetry system …and more generally all types of applications requiring long range or in particular disturbed environment.
DemoKit - Integration kit including : demoboard, module, RS232 cable, power supply available for this product.
* Evaluate the products
* Perform RF measurements
* Develop a prototype
For any information http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
PERFORMANCE
Power Output: 500mW@5V(Default), 1W@9V(customized)
RF Line-of-sight Range: 4000m@1200bps, 2000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps optional Receiver Sensitivity: -124dBm@1200bps, -118 dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <400mA@500mW, <500mA@1W
Receive Current: <40mA
Sleep Current: <5µA optional ex-factory
Frequency Band: 433MHz(Default)
400MHz~470MHz(customized)
Channel: 8(Default), 16/32 (customized)
Default Interface: COM1:TTL/UART,COM2:Non-Standard RS232 or RS485
Size: 53mm×38mm×10mm
Weight: 34g
Antenna Base: 50Ω
Operating Temperature: Industrial: -35℃~+80℃(TCXO crystal)
Commercial: -20℃~+60℃
Frequency Stability ±2.5ppm Industrial
±10ppm Commercial |
|
25kHz UHF Narrow Band FM Multi Channel Transmitter and Receiver.
The TLC2H transmitter and RLC2H receiver offer a low power, reliable data link in an industry standard pin out and foot print.
This makes the TLC2H/RLC2H pair ideally suited to those low power applications where existing wideband modules have insufficient range, or where low cost multi-channel operation is needed without compromising on RF specification or regulatory requirement.
|
|
The narrow band Radiometrix NiM2 transceiver offers a low power, reliable data link in a Radiometrix transceiver standard pin out and footprint.
This makes the NiM2 ideally suited to those low power applications where existing single frequency wideband UHF modules have insufficient range.
Available for licence-exempt operation in the 433MHz EU band, the NiM2 modules combine effective screening with internal filtering to minimise spurious radiation and susceptibility thereby ensuring EMC compliance. They can be used in existing low data rate (<10kbps) applications where the operating range of the system using wide band transceivers need to be extended.
Because of their small size and low power consumption, NiM2 is ideal for use in battery-powered portable applications.
Features
- Conforms to EN 300 220-3 and EN 301 489-3 (10mW version only)
- Standard frequency: 434.65 and 434.075MHz
- Custom frequencies available in 433MHz (EU) band
- Usable range over 500m
- 25kHz Channel spacing
- Feature-rich interface (RSSI, analogue and digital baseband)
- Longer range compared to Wide Band FM modules
|
|
FC-201/VB RF module
Application:
¡ùShort distance POS system
¡ùWireless sensor data collecting
¡ùWireless meter reading
¡ùIndustrial remote control and telemetry
¡ùAutomatic data collecting system
¡ùBuilding automation, safety and security, powerhouse equipment wireless monitor, entrance control system
¡ùWireless keyboard, mouse
Specifications:
1) Carrier frequency: VHF / UHF
2) Channels: 8
3) FSK
4) Channel Spacing: 25kHz / 12.5kHz
5) RF Power: ¡Ü20mW
6) Receiving sensitivity: ¡Ü-116dBm
6) Transmitting current: ¡Ü35mA
7) Receiving current: ¡Ü25mA
8) Standby current: ¡Ü5mA
9) Interface: UART / TTL; data rate: 1,200bps; format: 8E1
10) Air data rate: 1,200bps
11) Power supply: DC 5.0V¡À20%
12) Temperature: -25¡ãC ~ +70¡ãC
13) Dimensions: 37 x 30 x 13mm
14) Weight: 30g |
|
DESCRIPTION
The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the
input side and a photo diode and a signal processing circuit on the output side on one chip.
The PS9587L1 and PS9587L2 are designed specifically for long creepage-distance as well as high common mode
transient immunity (CMR) and high speed digital output type. Consequently, they are suitable for high speed logic
interface that needs long creepage-distance (8 mm) on mounting.
The PS9587L1 is lead bending type for long creepage distance.
The PS9587L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
The PS9587L3 is lead bending type (Gull-wing) for surface mounting.
FEATURES
- Long creepage distance (8 mm MIN.: PS9587L1, PS9587L2)
- High common mode transient immunity (CMH, CML = ±15 kV/µs MIN.)
- High isolation voltage (BV = 5 000 Vr.m.s.)
- High-speed response (10 Mbps)
- Pulse width distortion (%u23D0tPHL %u2212 tPLH%u23D0 = 10 ns TYP.)
- Open collector output
- Ordering number of tape product: PS9587L2-E3: 1 000 pcs/reel
: PS9587L3-E3: 1 000 pcs/reel
- Pb-Free product
- Safety standards
- UL approved: File No. E72422
- CSA approved: No. CA 101391
- BSI approved: No. 8937, 8938
- SEMKO approved: No. 615433
- NEMKO approved: No. P06207243
- DEMKO approved: No. 314091
- FIMKO approved: No. FI 22827
- DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
- FA Network
- Measurement equipment
- PDP |
|
|
|
Radio, Microwave, Infra-red, Optical connections
