|
|
Amplifier of ringing:
With very new Tiptel Ergo Voice 12 Flashes, we propose to you an amplifier of ringing for your analogical line.
Ideal in residential medium for the people having auditive difficulties, the ringing of Tiptel Ergo Voice 12 Flash has a volume of 100db which makes it possible to be easily heard, even in the noisy environments.
In addition to one extra-strong ringing, Tiptel Ergo Voice 12 flashes is equipped with an integrated light flash. At the time of an incoming call, Tiptel Ergo voice 12 flash emits a powerful flash which makes it possible to announce the arrival of a call.
This functionality is particularly useful not only for the noisy mediums such as warehouses, workshops, etc... but also for the environments silencer (Ex: Studio of recording, meeting room...) or the ringing of the telephone is decontaminated. You are thus informed of an incoming call.
Strong points:
Strong ultra telephone bell: Up to 100 dB
Adjustable volume on average, raised or decontaminated level
Light Flash integrated activable/désactivable
Connection on analogical line (DECT or telegraphic)
Simple to install, possible mural assembly
Food of the ringing by phone line |
|
As wireless communications become ever more pervasive in our daily lives, engineers are trying to design products that add functionality and communications to an increasing assortment of devices. GPS is one of the more well known applications leveraging satellite communication. Increasingly satellite radio has expanded it penetration and will continue to do so in the coming years. Bluetooth and short range wireless applications such RFID continue to grow and are poised to change the way business perform their operations.
In the near future, we anticipate an explosion of sensor systems that will wirelessly enable customers and provide information anywhere at any time. Engineers designing these systems consistently look for elegant antenna solutions that are invisible to the customer and are cost effective to utilize. Patch Antennas are increasingly selected as the antenna to use in GPS, Inmarsat, Globalstar, Satellite Radio and ISM applications. |
|
Universal Evaluation Kit
For Single Frequency FM Radio Modules
This Evaluation Kit can be used to evaluate single frequency Radiometrix VHF/UHF transmitter, receiver and transceiver modules. LED indicators are provided to show system status and to facilitate range testing and site surveys. The board is controlled by the Eval-RPC chip and incorporates several useful diagnostics & debug modes. Link-selectable 9.6kbps or 64kbps data rate.
Features
- Range Testing
- Target Environment Testing
- Noise and Interference Identification
- Antenna Evaluation
- TX1(H)/HX1/RX1, NTX2/NRX2, TX2(A)/TX2H/RX2(A), TX3A/RX3A, BiM1T/
BiM1R, CVR1, BiM/1/2/3A and NiM2 hardware test
- Transient Analysis
- Communication Eye Diagrm
- Analogue and digital data transmission
- Received Signal Strength Indicator (RSSI) meter
- Linking external hardware directly or via on board Eval RPC
- Responses up to 9.6kbps (A) or 64kbps (F)
|
|
These modules enable an economic single-way AM/FM digital link over a range of 4km.
They are used as an asynchronous serial channel where the useful data rate ranges from 0.5 à 10Kbps Manchester.
These modules (miniature daughter board to be integrated) are available in 3 versions
* 433/434MHz – 10mW
* 869.525MHz – 25mW et
* 869.525MHz – 500mW
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from radio remote control of gates, roller blinds, point to point transmission, micro-networks ... in general public or tertiary sectors of activity, home automation, access control, alarm ...
They also can be useful in all applications requiring long range or in a particular disturbed environment.
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
Power OutputF100mw (default),(5/10/15/20dBm Optional)
RF Line-of-sight RangeF 2000m@1200bps,1200m@9600bps
RF Effective RateF 1200/2400/4800/9600bps
Space ChannelF 150KHz
Bandwidth: 12.5~50KHz
Receiver Sensitivity: 123dBm@1200bps-116dBm@9600bps
Supply Voltage :4.75~5.25VDC
Transmit Current: <50mA@10dbm,<80mA@14dbm,<100mA@20dbm
Receive Current: <45mA
Sleep current: <5ƒÊA
Frequency Band: 405~440MHZ (UAN433) customized
440~470MHZ (UAN450) customized
480~510MHZ (UAN490) customized
850~880MHZ (UAN868) customized
900~930MHZ (UAN915) customized
Channel: 128, Soft Setup
Interface: TTL/UART
Size: 47mm~26mm~6.85mm (excluding antenna base)
Weight: 22g
Antenna Base:50Ohm , SMA
Operating Temperature: Industrial:-35Ž~+80Ž(TCXO)
Commercial:-20Ž~+60Ž
Frequency Stability: }2.5ppm Industrial
}5ppm Commercial |
|
- LOGICAL I/O TRANSFERS :
Transmitter : 8 logic inputs
Receiver : 8 static outputs or 4 relay outputs (it is possible to have 2 pcs
4 relay receivers + 1 transmitter working together)
Permanent or momentary radio link
7 groups of 3 frequencies (for the version with "high immunity to
interferences") or 8 frequencies
Range : 300 m (in unobstructed area)
Response time : 100 ms
Power supply : 10 to 30 Vdc
Relay output receivers : 12 to 30 Vdc
Metal housing
IP 65
- ANALOGUE I/O TRANSFERS :
Transmitter : 4 inputs in 8 bit resolution or 3 inputs in 10 bit resolution
Receiver : 4 outputs in 8 bit resolution or 3 outputs in 10 bits, static PNP,
4-20 mA/0-5 V compatible.
Permanent radio link
7 groups of 3 frequencies (for the version with "high immunity to
interferences") or 8 frequencies
Range : 300 m (in unobstructed area)
Maximum frequency of use : 3 Hz
Power supply : 10 to 30 Vdc
Metal housing
IP 65 |
|
The Radiometrix UHX1 is a high-specification telemetry radio tranceiver.
The Narrow Band FM multi-channel VHF transceiver unit ideal for use in the new 169.4-169.475MHz European band. Squeezed into a compact, low profile package (67x30x12mm), it can provide a reliable data link capable of supporting rates of up to 5kbit/s or 1200 baud modem link over a range of more than 1km.
The dual frequency capability allows UHX1's transmitter section to be operated on one frequency while receiver frequency on another.
Features
-Conforms to ETSI EN 300 220-3 and EN 301 489-3
-High performance double superhet, 128 channel PLL synthesizer
-500mW RF power output: adjustable via serial command
-Data rates up to 5 kbps for standard module
-Usable range over 1km
-Feature-rich interface (RSSI, analogue and digital baseband)
-Incorporates a 1200baud modem
-Re-programmable via RS232 interface
-Low power requirements
Applications
- Heavy vehicle/machine remote controls
- Environmental monitoring equipment
- Automatic Meter Reading (AMR)
- Asset Tracking and Tracing
- Data logging systems
- Industrial telemetry/telecommand
- High-end security/fire alarms.
Technical specifications
Operating frequency: Any 2MHz segmnet in 140- 175MHz
128 channels controlled via RS232 interface
16 channels selected by parallel interface
Transmit power: : 500mW (+27dBm) nominal. Adjustable 1 - 500mW
Supply range: 5V regulated transmit, 3.1 - 15V receive
Current consumption: 330mA (at 500mW output) transmit, 25mA receive
Receiver sensitivity: -118dBm (for 12 dB SINAD) |
|
Functional principle:
The PLICSRADIO series is used for easy wireless transmission of4 ... 20mA/HARTsignals andswitchingconditions. An emitting unit receives the measured values and can be also used as (Ex) supply for sensors connected via cable. Individual 4 ... 20 mA/ HART sensors of any manufacturer can be connected. A receiving unit receives the measured values via a radio link and transfers these to a 4...20mA output or a processing unit, depending on the version. In addition, an indicating unit located within the radio range can show the requested measured values. |
|
ADI offers a variety of transceivers for wireless applications. The Othello® family of direct conversion radios offers numerous benefits to developers of GSM, GPRS and EDGE terminals such as best-in-class performance and significant BOM savings. The ADF702x family is well-suited for audio, cordless phones, video over ISM, low-rate connectivity, security systems and automatic meter reading, featuring low power and minimal external components. In addition to the Orthello family, ADI also offers the WiMAX family of RF transceivers which offer a complete RF and mixed-signal system on a chip.
|
|
| High-frequency SiGe, BiCMOS, and bipolar processes make Maxim your source for low-power, low-cost, high-performance, complete system solution RF ICs for wireless, RF, and cable applications. |
|
ISM Wireless USB RF data Radio FC-211SU
Features:
1) AT86RF211S based design
2) Comply with CE
3) Weatherproof & exquisite housing
4) Standard RS-232 & USB interface availble
5) Industrial design for various data transmission application
Technical Specifications
Frequency range: 433.92 MHz
Modulation mode: FSK
Channels: 8
Receiving sensitivity: ≤-113dBm
1st IF: 10.7MHz
2nd IF: 455KHz
Adjacent channel selectivity: ≥65dB
Adjacent channel power: ≥65dB
Output Power: ≤10mW (20mW)
Frequency Stability:±5ppm
Channel Spacing: 50KHz
Frequency deviation: ≤1KHz
Spurious rejections: ≥60dB
Maximum current: ≤82mA
Stand-by current: ≤14mA
Antenna impedance: 50Ώ
DC Voltage range: 5.0±0.5 V
Ambient temperature: -20℃~55℃ |
|
RF Radio Transceiver FC-211AG
Main Specifictation :
1)ADF7020-1 based design, with less peripheral circuit, high reliability.
2)The communication data rate can reach 38.400Kbps.
3)TTL/UART, RS-232, RS-485 available to provide transparent data interface.
4)Transparent data transmission and intelligent data control.
5)Low power consumption and sleep function, capable of awaking up passively by air signal.
6)Industrial standard design with low cost.
Specifications
1)Frequency Range: 474.80475.50 MHz (80-650MHz available based on customers needs)
2)Frequency Stability: ¡À5ppm
3)Channel Capacity: 8 (customization for more channels)
4)Channel Spacing: 50kHz
5)Modulation Mode : FSK
6)Communication Data Rate: 1.2Kbps~38.4Kbps
7)Interface Available: UART/TTL, RS-232, RS-485
8)Receiving sensitivity: ¡Ü -114dBm
9)Interface Data Rate: 1.2Kbps~38.4Kbps
10)Power Output: 50mW
11)Power Supply: DC 5.0¡À0.5V
12)Sleep Current: < 3uA /TTL,< 0.5mA /RS485,< 3mA /RS232
13)Transmitting Current: < 40mA /TTL,< 51mA /RS485,< 52mA /RS232
14)Receiving Current: < 30mA /TTL,< 36mA /RS485,< 36mA /RS232
15)Dimensions(L x W x H): 40mm¡Á25mm¡Á10mm
16)Weight: 10g(antenna excluded)
17)Operating Temperature: -25¡ãC ~ 60¡ãC
18)Antenna Impedance: 50¦¸
19)Antenna Port : SMA connector, female |
|
This system enables two-way half duplex digital links over a range of up to 6Km.
It is used as an asynchronous serial channel where the useful data rate ranges from 0.2 kBps to 50 kBps Manchester.
These systems offer 9 transmission channels
These modules (miniature daughter boards to be integrated) are available in 4 versions
* Monochannel 433MHz / 868MHz or 915MHz
* 8 channels 433MHz - 10mW
* 9 channels 868MHz
* 1/2/5 channels 868MHz - 500mW for long range applications
They are in accordance with the European Directive EN 300-220 / EN 301-489
The applications covered range from point to point transmissions, industrial remote controls, remote sensors to cordless local networks... in both industrial sectors of activity: robotics, remote control, and in general public or tertiary fields: access control, home automation...
For any information : http://www.adeunis-rf.com or +33 (0) 4 76 92 07 77 |
|
Channel programmable transceiver
The UHF FM narrow band transceiver module STD-302N/N-R is suitable for industrial remote control and telemetry applications. Custom made SAW filters and narrow band technology provides reliable data communication in industrial applications where good interference rejection and practical range is required. Suitable for feedback systems. |
|
PERFORMANCE
Power Output: 27~30dBm
RF Line-of-sight Range: 2000m@1200bps,1000m@9600bps
RF Effective Rate: 1200/2400/4800/9600/19200/38400bps
Receiver Sensitivity: -118dBm@1200bps,-114dBm@9600bps
Supply Voltage: +4.75~5.5VDC
Transmit Current: <450mA@27dbm,<500mA@30dbm
Receive Current: <45mA
Sleep current: <5μA
Frequency Band: 868MHz(Default),820MHz~960MHz(customized)
Channel: 8(Default),16/32 (customized)
Interface: TTL/UART, standard RS232 and RS485
Size: 78mm×56mm×15mm
Weight: 45g
Antenna Base: 50Ω
Operating Temperature: -35℃~+80℃(TCXO crystal)
Frequency Stability: ±2.5ppm |
|
869MHz Wide Band FM Radio Transceiver
The BiM3B radio transceiver module is an enhanced higher power replacement for the European version BiM3A-869-64.
Two frequency variants are available in the European unlicensed band, one with 5mW RF power with no duty cycle restriction, the other with 25mW RF power with 1% duty cycle restriction.
Features
- Complies with European harmonised standards EN 300 220 and EN 301 489
- RF power output: +14dBm (25mW)
- Data rates up to 64kbps
- Crystal controlled PLL FM circuitry for both Tx and Rx
- Receiver Sensitivity: -101dBm for 1ppm BER (64kbps)
- Usable range up to 300 metres external, 75 metres in building
- RSSI (standard) or carrier detect option
- Analogue and digital baseband
- Low profile with small footprint
|
|
| AUREL RF receivers are produced in accordance to RoHS European Directive and are identified with a -G- suffix to Manufacturing Code (Ex. 650200609G). |
|
Features :
- Laser Class 1
- Compliant with Small form Factor Pluggable MSA Specification
- Compact Size (13.3 x 49.8 x 9.8 mm / 0.52 x 1.95 x 0.39")
- Compliant with Industry Standard RFT Electrical Connector and Cage
- Available with either button release or bail release latching mechanism
- High-Performance and Cost-Effective
- Single +3.3 V Power Supply and TTL Logic Interface
- Low Power Consumption
- Metal Package for Superior EMI Performance
- EEPROM with Serial ID Functionality
- Enhanced Monitoring Functionality (Digital Diagnostics per SFF-8472 available)
- Standard and Wide Operating Temperature Ranges
Applications:
- SONET/SDH from 155 Mbit/s to 2.7 Gbit/s (OC-48, OC-12, OC-3, and STM-14, STM-4, STM-1)
- GbE (GbE-SX, GbE-LX, and GbE-ZX)
- FC (1GFC and 2GFC)
- Transmission distances from 500 m to 100 km
- Metropolitan and access systems
- IP routers and ATM core switches
- DWDM for Metro Area Networks |
|
Micropower Data RF Module FC-211/SP
Application:
Ÿ Wireless data transmission.
Ÿ Wireless meter reading
Ÿ Automatic data collecting system
Ÿ Industrial remote control and remote measurement
Ÿ Building automation, safety and security, powerhouse equipment wireless monitor, entrance control system
Specifications:
1) Carrier frequency: 433MHz
2) FSK
3) Channel: 4, customization for more channels
4) Power: <40mW
5) Receiving sensibility: -107dBm
6) Sleep current: <0.2mA/TTL, <0.3mA/RS485, <3 mA/RS232
7) Transmitting current: <80mA/TTL, <80mA/RS485, <85 mA/RS232
8) Receiving current: <13mA/TTL, <13mA/RS485, <16 mA/RS232
9) Interface: TTL, RS-232, RS-485, data rate: 1,200~19,200bps,
format: 8E1/8N1/8O1 user-defined
10) Air data rate: 1,200~19,200bps
11) Voltage: DC 5.0}0.5V
12) Temperature: -25‹C ~ 60‹C
13) Size: 45 x 30 x 10mm |
|
| Designers can easily add cost-effective, short-range wireless data features to their products using the Toshiba family of low-power, high-sensitivity, single-chip radio transceivers and receivers. The devices offer frequency bands of 240 to 450 MHz, 900 MHz and 2.4 GHz. Each device is engineered to enable flexible and customized system designs reducing end-product and manufacturing costs. |
|
Power Output:10~20mW. Single transmitter
RF Line-of-sight Range:≥800m
RF Effective Rate: 1200bps(Default),4800bps(customized)
Supply Voltage: 3.1~5V
Transmit Current: <45mA
Sleep current: <20µA
Frequency Band: 430.675MHz(Default)430~435MHz(customized)
Channel: Single Channel
Bandwidth: 10kHz
Interface: TTL(Default), download/setup
Size: 47mm*26mm*8mm
Antenna: 50Ω, with HAC-TH433 Spring Antenna
Weight: 22g
Operating Temperature:
-20℃~+60℃ 430.675MHz
-0℃~+60℃ 430.375MHz
Frequency stabilization:
±5PPM |
|
| SATIMO Multiprobe systems were until 2005 only available in the 0.4-6 GHz frequency band. Since 2006 the same speed advantages can be enjoyed by customers working from 70 MHz all the way up to 18 GHz thus making Multiprobe technology the choice for any application from wireless to automotive to defense and space. The full range of SATIMO probes family is available... |
|
SATIMO Dual Ridge Horns combine uniform gain and low return loss performance with wide band frequency operation.
The SATIMO horns have been used extensively in international facility comparison campaigns as high reliability reference antenna. The horns are supplied with high accuracy performance data.
|
|
FEATURES
- Compliant with MOST® optical physical layer specification revision 1.1 over an operating temperature range of -40ºC to 95ºC
- Enables an optical budget of 21 dB, an improvement of 8 dB over the MOST physical layer specification revision 1.1
- Transmitter high-speed RCLED source provides high optical power with lower operating current and fast rising and falling optical edges
- Stable "sleep mode" operation with exceptionally low current consumption of only 10 µA.
- RoHS compliant |
|
| The 622Mbps transceiver series products from HTOE are high performance, cost effective modules for serial optical data communication applications specified for a singlemode of 622 Mb/s. These modules are intended for Single-mode fiber, operate at a nominal wavelength of 1310nm and complies with the industry standard 1×9 footprint. Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. It operates with +5V or +3.3V power supply. All are housed in a plastic package and the combination produces a component of high reliability. |
|
|
|