Rockline® RMC1 Skirt Clamps provide the cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs. It stops material loss, eliminates safety hazards and reduces wear and premature failure of conveyor components. RMC1 Skirt Clamps are designed for easy installation, quick maintenance and years of service.
RMC1 Skirt Clamps come in a standard 4" (1200mm) length. An optional "Limited Space" (LS) model is available for tight chute configurations or for portable equipment. Also offered is a "Pick-A-Length" (PAL PAK) option for longer length or special length requirements. The RMC1 handles a variety of skirt rubber sizes. It can also be used with a range of skirt rubber thicknesses from 5/16" (8mm) to 3/4" (19mm).
The RMC1 features a no-hassle installation with few parts. First the clamp pins are positioned on the conveyor's skirt board and welded into place. Then the clamp plates are hung on the pins and the clamp bar and the skirt rubber are inserted. And finally, the clamp bar is tack welded to the plates.
All installation and maintenance work can be done safely from the sides of the conveyor. Just tap loose the locking wedges on the clamp pins, reposition the skirt rubber and relock the pins. The rest of the parts interlock so when the pins are unlocked, they remain in place supporting the skirt rubber while maintenance is completed.
