|
|
Axial fan FH design
Specification:
7-sickle bladed die-cast aluminium impeller, sizes from 350 to 650 mm, 60 Hz types, air volume (freeblowing) from 2,600 to 11,500 m³/h.
Attributes and special features:
Steep performance curve, acoustically optimised, optimised for full bell mouth applications, 100% speed controllable by voltage reduction.
Applications:
Heating technology
|
|
Axial duct fans EZR/DZR for commercial use: durable, powerful and robust
For ventilation or air extraction of
· Showrooms
· Foreman%u2019s offices
· Workshops
· Production sites
As well as for machine extraction
High degree of protection IP55
Can be fitted in any position
Duct sleeve made of galvanised sheet-steel, with flanges on both sides
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version, for two speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
FY-25DSF1
Duct diameter = 200mm
Air volume = 600 m3/h
FY-28DSR
Duct diameter = 250mm
Air volume = 774 m3/h
FY-28DSM
Duct diameter = 250mm
Air volume = 1,194 m3/h
FY-35DSM
Duct diameter = 300mm
Air volume = 2,016 m3/h
FY-40DSL
Duct diameter = 350mm
Air volume = 2,894 m3/h
FY-40DSH
Duct diameter = 350mm
Air volume = 3,378 m3/h
FY-45DST
Duct diameter = 400mm
Air volume = 4,224 m3/h
FY-45DSL
Duct diameter = 400mm
Air volume = 4,898 m3/h
FY-40DTL
Duct diameter = 350mm
Air volume = 2,943 m3/h
FY-40DTH
Duct diameter = 350mm
Air volume = 3,210 m3/h
FY-45DTT
Duct diameter = 400mm
Air volume = 4,154 m3/h
FY-45DTL
Duct diameter = 400mm
Air volume = 4,817 m3/h
FY-45DTH
Duct diameter = 400mm
Air volume = 5,454 m3/h
FY-55DTL
Duct diameter = 450mm
Air volume = 7,414 m3/h
FY-55DTH
Duct diameter = 450mm
Air volume = 8,526 m3/h
|
|
Jetfan
Series VSTI
Garage-Jetfan, direct driven
Fan size range:
315 - 400
Application:
Extraction of fire gases up to 300°C/120min max.
and ventilation up to 80°C permanent temperature
Technical data:
P = 100 - 400 Pa
L = 0,25 - 3,0 kW
Dynamic impulse 7 - 92 N
Certified according to EN 12101-3
|
|
Axial Tunnel Fan
Series: VST
Fan size range:
560 - 2000
Application:
Suitable for fire gases up to 400°C/120 min. and ventilation up to max. 80°C permanent temperature
Dynamic impulse 250 - 400 N
Certified according to EN 12101-3
|
|
Medium pressure VMP
Wall unit fan for medium pressure with square mounting plate .
Sizes:
VMP 310 - VMP 1.000 (Ømm)
Application:
Ventilation for condensation, air heaters or coolers, rooms.
Technical Data:
V = 1.000 - 65.000 m³/h
P = 0 - 600 Pa
L = 0,12 - 22 kW
|
|
Axial wall fans EZQ / DZQ resp. EZS / DZS and DAS
For commercial use: durable, powerful and robust
For ventilation or air extraction (“E”-version only for air extraction) of
- Production facilities
- Commercial premises
- Garages
- Portacabins
- Storage facilities
High degree of protection IP55 resp. IP54
Can be fitted in any position
With square wall plate (EZQ/DZQ) or wall ring (EZS/DZS and DAS)
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS and DAS)
Pole-changeable version for 2 speeds
Special versions available on request
Air flow volume:
EZQ/DZQ resp. EZS/DZS up to 15,000 m³/h
DAS up to 69,000 m³/h
|
|
Model: GED
Direct Drive Wall
Propeller Fan
Sizes 10 to 20 inch
380 to 5,200 CFM
Static Pressure to 1"
AMCA Air and Sound
|
|
|
|
|
|
COMPACT WALL and DUCT AXIAL FANS (HCGB and TCGB)
The S&P COMPACT WALL and DUCT AXIAL FANS feature, as the name suggests, an extremely compact design created by the combination of an internal rotor motor mated with a direct drive wrap around impeller hub. This very low profile design optimizes airflow performance while minimizing noise generation. Both wall and duct mounted versions require an absolute minimum depth for any given wall, ceiling, panel or in-line duct mounted installation.
The S&P COMPACT WALL AXIAL FANS are designed to be installed directly into sidewalls, ceiling and panels and exhaust or supply air to the surrounding environments.
All COMPACT WALL AXIAL FANS include a one piece bell mouth inlet and mounting plate manufactured from high grade galvanized steel. The motor and fan impeller assembly are firmly supported within this mounting plate by a strong steel support frame that includes an integrated finger guard on the inlet side. All units are supplied with motors prewired to a wiring junction box located on the back of the motor hub for easy wiring access. This terminal box protects all wiring connections against the ingress of dust and moisture. The entire assembly is protected by a two stage primer and a tough corrosion and UV resistant polyester paint finish.
|
|
FV-20AU9
Air volume = 580 m3/h
FV-25AU9
Air volume = 920 m3/h
FV-30AU9
Air volume = 1,200 m3/h
FV-20AL9
Air volume = 546 m3/h
FV-25AL9
Air volume = 835 m3/h
FV-30AL7
Air volume = 935 m3/h
FV-20RL7
Air volume = 546 m3/h (exhaust)
FV-25RL7
Air volume = 876 m3/h (exhaust)
FV-30RL6
Air volume = 990 m3/h (exhaust)
FV-20RG7
Air volume = 580 m3/h (exhaust)
FV-25RG7
Air volume = 945 m3/h (exhaust)
FV-30RG7
Air volume = 1,165 m3/h (exhaust)
FV-20AS2
Air volume = 516 m3/h
FV-25AS2
Air volume = 858 m3/h
FV-30AS2
Air volume = 1,182 m3/h
FV-15AST1
Air volume = 288 m3/h
FV-20DL307
Air volume = 560 m3/h
FV-25DL307
Air volume = 882 m3/h
|
|
High pressure VHKR-C
High pressure axial flow fan range 2 with guide vane - belt driven.
Fan size range:
DN 400 - DN 1.250 (Ømm)
Application:
Extract and supply systems, max. continous ambient temperature upt to 40°C or 80°C
Technical data:
V = 5.000 - 180.000 m³/h
P = 300 - 4.100 Pa
L = 2 - 75 kW
|
|
The SERIE EVI D-T-S axial ducted fans are especially suited to applications where it is necessary to feed humid or dusty air and poison gas. Number of blades: from 6 to 10. They are produced in painted steel and they are available in 3 versions:
D: direct-coupled motor, at temperatures up to 40°C, 60°C on demand;
T: belt-drive motor with belt pulley, trapezoidal belt, at temperatures up to 100°C, 150°C on demand;
S: projecting motor with low ring.
|
|
Model: LC
Belt Drive Wall
Propeller FAn
Sizes 20 to 60 inch
3,000 to 40,000 CFM
Static Pressure to 1/2"
AMCA Air and Sound
Model: L2
Direct Drive Wall
Propeller Fan
Sizes 20 to 60 inch
600 to 55,800 CFM
Static Pressure to 1"
AMCA Air and Sound
Reversible Motors Available
Model: L3
Belt Drive Wall
Propeller Fan
Sizes 24 to 72 inch
27,00 to 85,000 CFM
Static Pressure to 1"
AMCA Air and Sound
Reversible Motors Available
|
|
The HIB/HIT range of belt drive axial fans consists of three nominal fan sizes, 800, 1000 and 1250mm respectively. These three sizes can be supplied with 1ph 230V 50Hz or 3ph 400V 50Hz motors with various power ratings to achieve the required airflow performances.
Airflow performances range from 13,500 up to 40,700 m3/hr and pressures up to 265Pa.
All standard models include and automatically actuated louvre shutter fitted to the discharge side of the fan and a steel finger guard on the inlet side. In addition, a wide range of specialist accessories are available to complete any given installation.
|
|
Six Blade Fan
8' to 24' in diameter
This design configuration, using the Whisper Foil XL blade, yields higher mechanical efficencies resulting in improved performance and more air flow! (Same air flow as a 10 blade fan! )
The 20-foot SIX Blade fan uses ONLY .576 kW at MAX Speed.
At 9 cents per kilowatt that's less than 5 cents per hour!
|
|
|
|
|
|
Ceiling Fan - Standard Type ( F-480Z1 )
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-560Z1 )
Compact regulator series
3-blade design
56 inches (1,400mm) blade span
Ceiling Fan - Standard Type ( F-480Z2 )
Standard regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-560Z2 )
Standard regulator series
3-blade design
56 inches (1,400mm) blade span
Ceiling Fan - Standard Type ( F-600Z2 )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
Ceiling Fan - Standard Type ( F-480SS)
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-600SS )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
Ceiling Fan - Standard Type ( F-480XW )
Compact regulator series
3-blade design
48 inches (1,200mm) blade span
Ceiling Fan - Standard Type ( F-600XW )
Standard regulator series
3-blade design
60 inches (1,500mm) blade span
|
|
|
|
|
|
The jet fans are available as an
* asymmetric type, developed with high efficiency for one direction
* symmetric type, with a partially reversibility (40%; 60%; 90%) in both directions.
With the standard jet fans thrust from 35 N up to 2500 N is available. Higher values are possible on request. With different length for the silencers, nearly every required sound pressure level can be reached. With the special developed impellers (cast in steel-bolts, etc.) very high tip speeds and very high temperatures are possible. X-raying of the impeller blades and the impeller hub is not necessary, but can be done on customer request.
The jet fans are tested according to ISO 13 350, the axial fans according to ISO 5801. Additionally all fans have to pass the factory acceptance test before delivery. The jet and axial fans are tested and certified according to EN 12 101−3.
Jet Fans
* Size: 400 to 1800 mm (bigger sizes on request)
* Casing thickness: 4 − 10 mm
* Impeller types: N, M, NR, MR (adjustable pitch at impeller standstill)
Design
* with inlet cone (for one direction: type GD / for both directions: type GDR)
* with inlet cone and silencer (for one direction: type GT / for both directions: type GR)
|
|
Brushless DC Fans and Impeller Style Blowers...
offer multi-speed aerodynamic performances for all types of high airflow applications. Our standard designs come with fully integrated electronics and are available in various input voltages including 12 and 24 VDC (13.8 and 27.6 VDC). Environmentally resistant designs are also available for those applications that may require exposure to natural elements. With airflow exceeding 1900 CFM, these products combine the long life expectations of brushless DC products with maximum cooling and air moving capability.
|
|
|
We can provide many kinds of fans for the thermoelectric cooling system and also can provide the custom design.Please do not hesitate to contact us,if you have any requirment
|
|
|
|
|
|
Throughout the past decade, Big Ass Fans has been focused on developing innovative air movement solutions to enhance comfort and reduce operating costs in large industrial buildings. The all new Element fan for commercial, air conditioned spaces was developed around that same paradigm.
Element incorporates the same durable strength, reliable construction and redundant safety features that define a Big Ass Fan. It works and operates much like its industrial sibling, but is refined for the specific needs of commercial spaces.
In spaces where air conditioning is a necessity, HVAC systems use costly ductwork to distribute air, often resulting in hot and cold spots throughout the building. Element works with the HVAC system to distribute air more efficiently over large spaces, creating non-disruptive airflow that enhances the comfort of building occupants.
Element is the only high-efficiency air movement solution available for commercial spaces, offering silent operation and a customizable style to complement any environment. Element is perfectly matched to the needs of spaces where people work, work out, eat, shop, celebrate and congregate.
Experience Element at www.elementfan.com. For the complete line of Big Ass Fans, visit www.bigassfans.com or www.elementfan.com
|
|
|
One of these HVLS fans will push as much air as five high speed fans (MacroAir studies indicate 12 or more fans). Our study shows an 84% energy savings when an HVLS fan is compared with five conventional fans."
|
|
Fresh air is sucked in via an intake hood.
The filter section consists of an extractable filter with a V-type filter mat of quality class EU4. The intake side is fitted with a louvered damper with oppositely coupled profiled slats and a rod assembly for mechanical actuation. The unit is prepared for the addition of a damper servomotor.
The fan section consists of a double-active radial fan made of galvanized steel. The impellor is statically and dynamically balanced; the bearings of the shaft are durable low-noise roller bearings. The driving motor is a three-phase motor with V-belt. It is supported together with the fan by a diagonal support or a base frame free of vibrations.
|
|
|
Direct driven axial fans, impeller blades adjustable at rest, explosion-proof design according to ATEX
|
|
Application
WP-D/Ex roof fans are meant for use in areas of explosion risk, where explosive atmos-
phere can occur, i.e. mixture of fl ammable substances in a form of gases, vapours and
mists with the air.
Due to increased pressure it is possible to apply the fans with local exhausts and with
the fi ltering units and also with a ventilation system of signifi cant resistances. The fan
can be used in installation with a roof discharge unit of a required dynamic rise.
Structure
The fan consists of:
– spiral housing,
– explosion-proof motor,
– radial impeller, mounted directly on the motor shaft,
– silencer – installed at the fan outlet,
– fl ange to install the fan,
– motor hood.
The basic elements of the fan (housing, impeller, silencer, fl ange) are made of non-
magnetic stainless austenitic steel whereas the motor hood is made of aluminium
plate. The whole fan is in a natural colour of stainless steel.
|
|
Explosion-proof fans to be used in potentially explosive areas
Type-examination tested according to European Directive 94/9/EC (ATEX)
Device group II, Category 2 G
Type of protection “e”: Increased safety
For zones 1 und 2
The following types of construction are available:
Axial wall fans
EZQ-E Ex e / DZQ-E Ex e with square wall plate
EZS-E Ex e / DZS-E Ex e with steel wall ring
Single phase AC version (EZQ- resp. EZS-E Ex e) and three-phase AC version (DZQ- resp. DZS-E Ex e)
Air flow volume up to 10,400 m³/h
Semi-centrifugal duct fans ERM-E Ex e
Single phase AC version
Air flow volume up to 870 m³/h
Axial duct fans DZR-E Ex e
Three-phase AC version
Air flow volume up to 10,500 m³/h
Axial roof fans DZD-E Ex e
Three-phase AC version
Air flow volume up to 7,100 m³/h
|
|
Gas freeing axial fan compressed air drive, explosion proof design. Casing made of
stainless steel, impeller made of seawater-resistent aluminium. Application for chemical tanker.
|
|
FV-30XPT
Ventilating Fan - Industrial Type ( FV-30XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Single phase
Air volume = 1,740 m3/h
FV-40XPT
Ventilating Fan - Industrial Type ( FV-40XPT )
Explosion proof series
Exhaust type
Blade size = 300mm
Three phase
Air volume = 3,840 m3/h
|
|
Slimline Fans
Ultra-compact slimline fans that use ‘inside out’ motor driven forward-bladed impellers allowing dimensions to be kept to a minimum. Used extensively by OEM industrial sector where space is at a premium. Accessories include speed controllers, spigots, guards, etc.
Key range performance figures:
Flow rates up to 1000M³/Hr (600CFM)
Pressures up to 7.5mBAR (3 In.SWG)
35W to 375W
Additionally, ACI also can offer the QB EC Fan range - A fan type employing intelligent motor-driven impellers. This allows units to be optimised for specific applications with regard to efficiency, speed, acoustic performance and cost.
Key range performance figures:
Flow rates up to 1400M³/Hr (825CFM)
Pressures up to 933Pa (3.5In.Swg)
40W to 520W
|
|
AXIAL FANS
Our wide range of axial fans includes:
- axial fans with suction inlet
- tube fans
- wall fans
- axial rooftop fans
- belt driven fans
- oven circulators
- ...
The standard models of these fans come with very short terms of delivery. We also have special models available, according to your needs.
CENTRIFUGAL FANS
You van rely on us for the following centrifugal fans:
- standard single inlet fans
- standard high pressure fans
- synthetic fans
- double inlet fans
- rooftop fans
- special fans
- oven circulators
The standard models of these fans come with very short terms of delivery.
|
|
|
|
Axial fans
