|
|
Product group P3
Pivoting frame for directed ventilation
Electric data:
• Protection class I (ground wire)
• Protection type IP 20
• Connecting leads 0,5m 3x0,75 mm² PVC
Other lengths upon request
Utilizing a circulation fan avoids head accumulation and formation of heat pockets inside control cabinets. When heaters are installed, their efficiency is increased by circulation fans. The resulting air circulation dissipates heat through the surface of the cabinet and so, a cooling effect is achieved.
|
|
Our wide range of axial fans includes:
- axial fans with suction inlet
- tube fans
- wall fans
- axial rooftop fans
- belt driven fans
- oven circulators
- ...
The standard models of these fans come with very short terms of delivery. We also have special models available, according to your needs.
|
|
Axiciat VA
Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings.
- Short (standard) or long (optional) galvanised steel casing
- Multiblade aluminium impeller with adjustable-pitch blades (adjustable when rotor has stopped)
- Two-piece cast aluminium hub allows blade pitch to be adjusted when rotor has stopped
- Internal motor support
- Single-speed motor (three-phase, 230/400V, 50 Hz) or two-speed motor (three-phase, 400 V, 50 Hz), IP55, coupled directly to hub
- Numerous accessories
Nine models available
Available pressure up to 750 Pa
Air flow rates: 1,250 to 95,000 m³/h
|
|
CHV Series
Features:
1. Compact, large airflow, and low noise
2. Bellmouth design of casing, high airflow
3. Steely bearings, suitable for continuous applications
4. Can be installed by horizontal, vertically, and obliquely directions
Casing and impeller are made by sheet steel
|
|
In any situation in which air circulation improves working or production conditions, the Nylair® brings an adaptable solution:
- air cleaning and renewing,
- cooling of hot environments,
- acceleration of drying and evaporation,
- extraction of vapours and steams.
The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h).
They of course, conform to CEE standards.
Their design allows for a direct and easy installation.
Their robust construction is ideal for arduous conditions:
- anti corrosion protection
- steel or thermoplastic and stainless steel impellers
|
|
OPPUS® Air-Driven Reaction Fans
Rugged, cast aluminum housing and fan blade make these fans ideal for hazardous locations and demanding ventilation projects. The RF design utilizes action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan blades providing extremely efficient, high-volume, low maintenance air movers.
FEATURES (RF-20, RF-24):
- 11,000 to 16,900 cfm (18,689 to 28,713 m3/hr) at 80 psig
- Use for fresh air supply or fume exhaust
- Can be carried or rolled to job site
- Spark resistant cast aluminum housing and fan blade
- Permanently lubricated bearings
- Flanges mate with 20-inch (508mm) and 24-inch (610mm) API tank opening
|
|
|
The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements.
|
|
Axial-Industrial Fans are available in the following designs:
-Axial-Medium Pressure Fans MAF (up to 1.350 Pa and 168.500 m³/h)
-Axial-High Pressure Fans HAFC (up to 5.200 Pa and 145.000 m³/h)
-Axial-Roof Fans MAFR (up to 1.100 Pa and 67.000 m³/h)
-Axial-Garage Fans MAFG (up to 2.600 Pa and 168.500 m³/h)
-Axial-Wall Fans MAFW (up to 860 Pa and 52.000 m³/h)
Additionally we offer the following customizing / accessories:
-Clockwise, anti-clockwise rotation or reversible
-Frequency converter
-Variety of accessories (feet, connectors, dampers)
-Special designs for specific applications
-Higher media flow and ambient temperature
-Improved corrosion protection
-Sealed housing parts
-special voltage and frequency
For more information please visit our homepage www.elektror.com
|
|
HJB MANN
HJB 80 - HJB 120
DESCRIPTION:
Helicoidal fans
Airflow: 32.000 - 45.000 m3/h
APPLICATIONS:
- General ventilation.
- Renovation of suffy air enviroment.
- Poultry farms and greenhouses.
|
|
Mounting size for AC-input: 80mm - 250mm
Mounting size for DC-input: 42mm - 119mm
Air capacity 0.18m³/min - 24m³/min
Static pressure 12Pa - 360Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 12V DC or 24V DC
Marking: CE, UL and cUL
Long-life type also available (MDE-Series).
|
|
- Speed-controllable
- Integral thermal contacts
- Maintenance-free and reliable
The AW/AR fans have speed controllable external rotor motors.
AW fans have square plates for wall mounting, AR fans have
round flanges for duct mounting. Casings manufactured from
galvanised steel, painted in standard black. The fans have
aerofoil blade impellers in die-cast aluminum, painted in
standard black.
To protect the motors from overheating the fans have
integral thermal contacts with external leads for connection
to a motor protection device.
|
|
|
The SERIE EV-6 axial electrical fans are especially suited to applications where it is necessary to interchange the air in the rooms and for other specific industrial applications. They are equipped with conveyor, motor support and protective grid. Number of blades: 6
|
|
High Pressure VH 2
Axial fan for high pressure with direct drive .
Sizes:
VH 310 - VH 1.250 (Ømm)
Application:
Industries: chemicals, textiles, process engineering and mining
Technical Data:
V = 1.000 - 150.000 m³/h
P = 300 - 2.500 Pa
L = 1 - 90 kW
|
|
|
|
|
|
Fixed or variable airfoil profile axial impellers HASCONWING Hascon Engineering has been operating in the ventilation sector for more than thirty years, and it is from this rich experience that our reliable and high quality axial impellers derive. The HasconWing product range, thanks to the numerous types (impeller diameters from 200 to 1275 mm and multiple configurations of blade profiles and setting angles), permits to create customised solutions for all air movement needs.
HasconWing HF impellers are manufactured with airfoil profile blades in polypropylene (yellow PP), polypropylene glass reinforced (orange PPG) and polyamide glass reinforced (white PAG) and a light aluminium alloy hub. The impellers can work to highest rotation speedswith, multiple blades with different setting angle producing a sucking or blowing flow.
APPLICATIONS
Radiators
Blowing units
Ventilation
Axial ventilators
Generetor units
Electric welding machines
Lift trucks
Earth moving machines
Agricultural machines and tractors
Heat exchangers
Cooling towers
Animal farms
Agricultural sprayers
Refrigeration units
Air conditioning
Regrigeretion and freezing
Devices
Hovercraft
Car and industrial vehicle air conditioners
Snow cannons
|
|
Turn or fixed blades series available in different materials with direct coupling or belts and pulleys transmission. For use in polluted environments and EEx proof applications.
Volume up to 150.000 m3/h and pressure up to 1.650 Pa
|
|
|
The Witt & Sohn mixed flow fan, called a Zentrax combines the advantageous features of an axial flow fan with the properties of a centrifugal fan. An inexpensive design and duct arrangement with a stable fan curve and relatively high pressure.
|
|
A large selection of outlet positions, casing geometries, casing thicknesses and materials is available for the various impeller types. The following is a description of the standard product range; a very flexible production allows special requirements to be met as well.
* Shaped inlet
* Fire damper
* Protection grill
* Mushroom cowl
* Feet for horizontal/vertical position
* Vibration attenuator
* Jet cowl
* Flexible connection
* Counter flange
* Silencer
* Variable inlet vane
|
|
Design Complete axial fans (motor + ring-/or tubular housing with attached console + impeller + protective mesh) Used in the 200 - 600 Pa pressure range and for air volumes of 2,000 - 8,000 m3/h. Media temperatures - 40 to + 60 °C
Main applications Rail vehicle transport technology, air conditioning rail version
Special applications Cooling and ventilation, air conditioning with noise insulation
Performance range 370 - 2200
|
|
|
The New York Blower Company offers a line of axial air-moving products designed to accommodate clean-air applications. Axial fans have the ability to handle moderate-to-high air flow, moderate static pressures and are easy to install. These characteristics make axial fans ideal for supply/exhaust and inline air flow. Please review the nyb line of axial fans to find the best fit for your clean air application.
|
|
|
|
|
|
MRS Series Axial Flow Fans (34)
Axial flow fans use a propeller to create a flow of air in the direction of the axis of rotation. Because they create a large airflow, axial flow fans are optimal for a wide variety of cooling and other airflow needs.
- High-Efficiency, Low-Noise Models
- AC Input
- Frame sizes from 5.51 in to 9.84 in
- Maximum airflow from 177 CFM to 883 CFM
- RoHS compliant models available
MU Series Axial Flow Fans (16)
Axial flow fans use a propeller to create a flow of air in the direction of the axis of rotation. Because they create a large airflow, axial flow fans are optimal for a wide variety of cooling and other airflow needs.
- Slim-Line, General Purpose Models
- AC Input
- Frame sizes from 3.15 in to 4.69 in
- Maximum airflow from 19.4 CFM to 106 CFM
MDE Series Axial Flow Fans (2)
Axial flow fans use a propeller to create a flow of air in the direction of the axis of rotation. Because they create a large airflow, axial flow fans are optimal for a wide variety of cooling and other airflow needs.
- Long-Life Models (up to 100,000 hours)
- DC Input
- 4.69 in frame size
- 95.3 CFM maximum airflow
MDS/MD Series Axial Flow Fans (48)
Axial flow fans use a propeller to create a flow of air in the direction of the axis of rotation. Because they create a large airflow, axial flow fans are optimal for a wide variety of cooling and other airflow needs.
- High-Performance Models
- DC Input
- Frame sizes from 1.65 in to 6.77 in
- Maximum airflow from 4.59 CFM to 212 CFM
- RoHS compliant models available
|
|
Range of low profile plate mounted axial fans fitted with plastic impellers (250 to 630) or aluminium hub and plastic blades (710 to 1000).
Available, depending upon the model, with single or three phase motors in 2, 4, 6 or 8 poles.
Motors
All the motors are IP65 (1), Class F insulation (2), equipped with thermal protection. All motors are speed controllable except 2 pole and /4-630, /4-710, 800, 900, 1000 models.
Electrical supplies:
- Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
- Three phase 230/400V-50Hz or 400V-50Hz.
|
|
Axial fans
plate mounted or short cased
Diameter of impeller: 200-1000 mm
max. V= 36.000 m³/h
max. pt= 240 Pa
100% speed controllable with external rotor motor
Application:
ventilation for buildings, halls and greenhouses,
agriculture, airconditioning, cooling and heating technology
Axial fan "Epsilon"
Diameter of impeller: 350-1000 mm
sichel shaped axial blades
100% speed controllable with external rotor motor
Application:
air heaters, heat pumps, condensers, cooling units, evaporators
AND axial flow fans with adjustable blades
number of blades: 5, 7, 10, 14
and hot-dip galvanized steel
max. V = 75.000 m³/h
max. pt = 830 Pa
Application:
wide performance area of volume and pressure,
general conditioning of higher air volumes
|
|
Axial fan "Epsilon"
Diameter of impeller: 350-1000 mm
sichel shaped axial blades
100% speed controllable with external rotor motor
Application:
air heaters, heat pumps, condensers, cooling units, evaporators
|
|
Axial fan FL design
Specification:
5-bladed aluminium sheet metal impeller, sizes from 315 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 11,500 m³/h.
Attributes and special features:
Fan optimised for short bell mouth applications, enhanced fan curve stability, fan blade design optimised for low noise.
Applications:
Refrigeration, ventilation, heating
|
|
Axial fan FH design
Specification:
7-sickle bladed die-cast aluminium impeller, sizes from 350 to 650 mm, 60 Hz types, air volume (freeblowing) from 2,600 to 11,500 m³/h.
Attributes and special features:
Steep performance curve, acoustically optimised, optimised for full bell mouth applications, 100% speed controllable by voltage reduction.
Applications:
Heating technology
|
|
Axial fan FB design, explosion-proof
Specification:
4-bladed aluminium sheet metal rotor, sizes from 350 to 650 mm, air volume (freeblowing) from 2,500 - 11,000 m³/h.
Attributes and special features:
Universal fan for installation in equipment, high flexibility by variation of blade angle and speed of motor, 100% speed controllable by voltage reduction.
Applications:
explosion-proof applications
|
|
Axial fan FE2owlet design
Specification:
7-sickle bladed, airfoil profiled, die-cast aluminium impeller, developed using bionic insights, size 800 mm, air volume (freeblowing) up to 26,000 m³/h
Attributes and special features:
best noise behaviour and lowest energy consumption, optimised for full bell mouth applications, 100% speed controllable
Applications:
air conditioning, refrigeration, transformer cooling
|
|
Axial fan FB design
Specification:
4-bladed aluminium sheet metal impeller, sizes from 350 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 13,000 m³/h, explosion-proof fans also available.
FB sizes 200-350mm: 5-bladed sheet metal impeller, sizes from 200 to 350 mm, available in both air flow directions, 50/60 Hz, UL and CCC types, air volume (freeblowing) from 700 to 2.800 m³/h,
Attributes and special features:
Universal fan for installation in equipment with short bell mouth, high flexibility by variation of blade angle and speed of motor, 100% speed controllable. From 350 mm size also available in explosion-proof design.
Applications:
Refrigeration, ventilation
|
|
Axial fan FREvent system
Specification:
Axial fans equipped with integrated electronic frequency inverter speed controls. The result is a highly efficient and extremely compact speed controlled fan. The FREvent system is well priced, and is fitted with motors optimised for efficiency.
Attributes and special features:
The most energy efficient system, without electronic motor noise, 100% speed controllable, integrated process controller.
Applications:
Refrigeration, agriculture, air conditioning, heating technology
|
|
Axial fan FC design
Specification:
7-bladed profiled die-cast aluminium impeller, sizes from 315 to 1,250 mm, available in both air flow directions, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 62,000 m³/h.
Attributes and special features:
Optimised efficiency, optimised for full bell mouth applications, 100% speed controllable.
Applications:
Air conditioning, refrigeration, ventilation, drying, cooling, agriculture
|
|
|
|
Axial fans
