|
|
|
These motors are mainly used for driving digital AV equipment and PC peripherals, and for automotive electronic components.
|
|
|
The 26BC6A features an integrated electronic commutation with a 6 wire lead. The 26BC6A features a no-load speed between 5600 and 14000 rpm. The power of the 26BC6A is rated at 14 Watts at 10 krpm.
|
|
|
|
|
|
Brushless permanent magnet motors from Iskra Avtoelektrika combine high performance and high reliability with a simple and therefore the best price-performance motor design. The motors offer high efficiency over a wide speed range and high torque at low speeds.
The motor construction with no commutator and brushes, no slots and windings on the rotor provides very low acoustic noise and torque-ripple.
With the addition of an efficient electronic controller already incorporated in the motor construction, the motor and electronics represent a single compact drive unit, and this type of motor becomes acceptable for many applications.
Main features of Iskra BLPM - Brushless premanent magnet motors:
* High efficiency in wide range of loads.
* Bi-directional drive.
* Speed regulation by means of PWM or analogue signal input.
* Adjustable soft start option.
* Current limitation.
* Constant speed control by means of an internal loop regulation.
* Intelligent motion by incorporated programmable microcontroller.
* Temperature protection.
|
|
Micropump patented electromagnetic drives use rare earth magnets to increase motor torque capabilities while reducing total pump/drive package size. Surface mount technology improves reliability and enables higher efficiency motor performance. Variable speed electronic controllers offer thermal and overload protection with the option of a 0-5 VDC input signal, a 4-20 mA current loop, or a manually controlled drive. Closed-loop speed control allows for quick and easy setting of speed.
Performance Summary
- Speed range 500 to 6000 rpm
- Torque @3500 rpm to 106 mNm
- DC voltage 20 to 30 V
- Power @ nominal V 40 or 70 W
- Current input 1.8 to 3 A max
- DC speed control 0 to 5 V
-Tachometer Output 0 to 5 square
|
|
Hydraulic pump AC motor with integrated controller
Specifically designed to offer a brushless alternative to DC series pump systems the HypAC™, brushless motor and integrated controller, provides significant performance and reliability advantages over an equivalent DC system. HypAC™ simplifies the path to a completely brushless vehicle design.
|
|
Mounting size: 42 mm, 60 mm, 80 mm and 90 mm
Output power: 15 W, 30 W, 50 W and 100 W
Speed range: 100 - 3000 r/min
Max. permissible torque: up to 68 Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 24 VDC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type.
|
|
Mounting size: 60, 80, 90mm
Output power: 30W, 60W, 120W
Speed range: 80-4000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-240V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Slow-start/slow-down functions.
Available types: Round shaft type, parallel shaft gear type, flat gear type
|
|
Motors in the BG range are electronically-
commutated direct current
motors (EC motors) with integrated
Hall sensors for rotor-position recognition.
Besides ball bearings, these
motors have no parts that are subject
to wear, and are thus especially suitable
for continuous operation. Their high
power density and compact form,
combined with a favourable
price/performance ratio make these
motors suitable for numerous applications.
|
|
|
|
|
|
Range from 30 W to 150 W in 3 phases, 4 poles
Integrated temperature sensor
Ball bearings for improved mechanical efficiency
Protection IP54
Lifetime exceeding 20,000 hours
Very low noise level
Rated speed between 2000 and 4000 rpm
Crouzet brushless motors can integrate electronic controls allowing regulation of; the torque, current consumption, emergency stop and brake, maintain of position and speed regulation by analogue entry (0-10V) or PWM.
Crouzet brushless motors can be coupled to:
90 º Gearbox: Designed for applications where the space and noise is critical. Very quiet
Planetary Gearbox : Up to 120 Nm nominal, high efficiency, high reduction ratios, available in 1,2 and 3 stages, a compact design with diameters of 52, 62 and 81 mm.
In addition, Crouzet has developed the Motomate concept which incorporates: a brushless motor, an electronic control card and a logic controller (Millenium) to create programs dedicated to an application.
Specially designed for the following markets:
Medical: Laboratory equipment, CPAP, centrifuge, physiotherapy
Access Control: Automatic doors, gates, lifts
Industrial Machinery: Automated movements, robotics, labeling
Valves : Vacuum pumps, automatic valves
|
|
|
The encoder commutated multi-pole synchronous motor is at its economical design as a hybrid stepper motor with encoder a low-budget servo drive system that makes motion control available to many new applications.
|
|
Highly dynamic and compact, reliable and scalable, with high overload capacity.
We have risen to the challenge and offer a comprehensive range of motors:
– Servo motors for highly dynamic applications
– Standard asynchronous motors as general purpose motors with many options
– DC motors with extremely smooth running characteristics at low speeds
Servo motors
Three-phase AC motors
DC motors
|
|
STALL TORQUE:
0.15 to 75 Nm
POLARITY:
4, 6, 8, 10 poles
RATED SPEED:
1200 - 2000 - 3000 - 4000 - 6000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
CE certification
cURus certification
OPTIONS:
low inertia motors - high working speed and high acceleration
compact motors - high torque density with respect to their volume
forced ventilation (from size 63 to 100)
|
|
|
|
|
|
As part of the wide range of AC servomotors proposed by Sanyo Denki, we have identified a series of models, carefully selected from among the most interesting for the Motion Control market, that can be coupled with RS1 drives.
The main characteristics of the motors are listed below:
P2, P3 and Q1 Series Motors: very compact, low inertia. Ideal for applications involving quick acceleration and fast positioning.
P5, P6 and Q2 Series Motors: compact, medium inertia. Ideal for applications in which the load inertia exceeds the motor inertia. Very smooth rotation, even at very low speed.
IP protection degree: IP43 to IP67 (according to the different models).
Power range: 50W to 3000W.
Maximum speed: 4500 rpm (3000 rpm for P5 1kW e P6 1.5kW).
Position sensor: incremental encoder on all models (A, -A, B, -B, C, -C). The real system resolution available is equivalent to 8000 step/rev.
Perfect behavior in overload conditions. E.g.: a torque equal to 200% of the nominal torque can be maintained for 10 to 20 sec. (according to the different models).
Proper management of any loads characterized by a level of inertia that far exceeds the motor inertia.
A complete map of all of the motor’s electrical features is stored in the R drives.
S
|
|
Our compact drive series "encoTRive" offers a great variety of drive configurations. On the basis of the communication and control platform different types of drives can be realized: actuating drive, positioning drive and processing drive.
Our drives consist of the following elements: motor, power electronics, bus interface, position closed-loop controller and a measuring system. To complement the compact drive, you can add further components like a gear, brake or I/Os.
|
|
|
Our brushless motor series offers three sizes, the GB9, GB12 and GB16, each offering offer up to 40% greater performance than conventional systems. The motors are uniquely configured for outstanding slow speed performance with high torque and sensitivity. The motors’ compact design also makes them ideal for space limited applications. Off-the-shelf motor and drive solutions are available, as well as customised models to meet the customers exact specification.
|
|
- Greater performance density than induction motors
- Volume reduced by a type size compared with induction motors
- State of the art magnetic technologies for max. efficiency
- High energy saving over induction motors
- Precise regulation of a DC motor
- Peak torques up to three times nominal
- Maintenance free, since brushless
- IP 54 / Insulation Class F
- Compatible with all Groschopp gearboxes
- Can be combined in principle with gearboxes of other manufacturers
- Options available, e. g. brakes, sensor systems
|
|
|
The SGMPH servomotor series has a medium inertia design with a flat profile providing the highest torque-per-length ratio available. These servomotors are well suited for applications requiring optimized load matching. There are five frame sizes providing up to 2,027 oz-in of peak torque. 100 and 200 volt windings are available with rated speeds of 3,000 rpm and maximum speeds of 5,000 rpm. An 8,192 ppr incremental serial encoder is standard. The SGMPH is rated IP67 (not including the shaft) providing resistance to moisture. Options include a 65,536 ppr absolute encoder, gearmotor, shaft seal, and holding brake.
|
|
|
|
|
|
General technical information on TK frameless motors
The TK series of frameless brushless motors provide the highest torque density available today for direct drive, high performance applications. Unlike traditional torque motrs, TK units have both high torque and high speed capability and thus operate seamlessly both as spindle and table motors.
TK motors consist of separately supplied stator and rotor units suitable for direct assembly inside the structure of the machine. TK motors are three phase, rare earth (Iron Neodymium Boron) permanent magnet units and reach the highest continuous and peak torque density available today, together with high speed and flux control ability over a constant power range up to 10:1.
The rotors use special Phase manufactured magnets with minimized loss factor allowing high speed operation with a thin isotropic rotor.
All rotors are rigid units with mechanical, glue free magnet retention, preloaded carbon fiber sleeve for safe operation even at very high speed.
Rotor are often semi custom units to allow direct coupling to bearings, encoders, brakes.
All TK motors are designed for fluid (water) cooling on the outside of the stator for maximum performance. Conduction/convection cooling is also possible. Constant power operation (flux control) always requires water cooling.
Customized frames with integral cooling or even partial machine subassemblies with bearings and encoders are manufactured on request based on the standard frameless magnetic designs available.
The torque range spans from 10 to 40,000 Nm with maximum diameter 1150mm; above that size, segmented semi custom units are available, currently up to 18 m diameter
|
|
Torque motors produce a high torque which acts proportionally with the current and remains practically constant over the whole of the engine's axis of rotation. With torque of up to 480mNm and angles of rotation of 80°, these are eminently suitable for adjustment tasks such as those effected by throttle valves, AGR valves, or variable turbine configurations in exhaust gas turbochargers. Their contact-free function and the option of installing position sensors gives the user a motive power solution with the assurance of all-round availability and safety.
The products of the series 4000 are at present only available for OEM applications.
|
|
|
|
|
|
Permanent magnets brushless motors with high power-to-weight ratio
With its highest power-to-weight ratio and torque constant, specially adapted to robots, mobile or borne applications with high power, the 136 OEP motors have been designed thanks to the electromagnetical and thermal optimization achieved by using dedicated simulations softwares, allowing an accurate precharacterization of the behavior in rated load and in overload
A rich industrial experience attests to optimal reliability.
Main Characteristics
# Rare earth magnets
# Star three-phase winding
# IP64 protection according EC 509 (1989)
# Class H insulation
# Flange B5
# Thermal protection by PTC resistance housed between 2 phase windings
# PTC Security threshold = 180ÝC
# 136 OEP 017 and 136 OEP 020: Air cooling with fan 100 l/s, 0.31 A or 24 VDC, 0.5 A.
# 136 OEP 050: fluid cooling with integrated external jacket
Advantages
# 136 OEP 017: 19.5 KW continuous at 6000 RPM
# 136 OEP 020: 29 KW continuous at 6000 RPM
# 136 OEP 050: 41.5 KW continuous at 6000 RPM
High torque constant at 0.85 Nm / Arms.
High efficiency: up to 95%.
High power-to-weight ratio: 1500 W / Kg continuous.
Characteristics of the range
# 136 OEP 017 : 19,5 KW permanent à 6000 mn-1
# 136 OEP 020 : 29 KW permanent à 6000 mn-1
# 136 OEP 050 : 41,5 KW permanent à 6000 mn-1
|
|
|
The megatorque motor ps series delivers unprecedented performance , including a maximum rotational speed of 10 and position sensor
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:
Very long life
High efficiency
Highly dynamic acceleration
Good regulation characteristics
Wide speed range
High power density
Maintenance-free
Robust design
Integral Hall sensors for rotor position
Low moment of inertia
High degree of protection
Winding insulation - Class E or B
Neodymium magnets
These electronically-commutated DC motors can be combined with control electronics, gearboxes, and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
Brushless DC motors
- Ø 6 - 60 mm
- 1.2 - 400 watts
- EC, EC-max, EC-powermax, EC flat
Characteristics
- Neodymium magnets
- Unsurpassed life time
- No abrasion
- Low noise level
- High speeds even at low voltages
- No magnetic cogging
- Good heat dissipation, high overload ability
- Very small electrical time constant and low inductance
- Autoclavable versions available
|
|
EC motors up to 300 W
Our EC motors feature an extremely high life-span, are robust and maintenance-free since - apart from the bearing system - they do not dispose of any mechanical wear parts. The motors are highly efficient (up to a level of approx. 80%) and have an excellent power capability. Due to low moments of inertia and a high start torque the motors have a very good dynamic response.
|
|
Brushless permanent magnet motors from Iskra Avtoelektrika combine high performance and high reliability with a simple and therefore the best price-performance motor design. The motors offer high efficiency over a wide speed range and high torque at low speeds.
The motor construction with no commutator and brushes, no slots and windings on the rotor provides very low acoustic noise and torque-ripple.
With the addition of an efficient electronic controller already incorporated in the motor construction, the motor and electronics represent a single compact drive unit, and this type of motor becomes acceptable for many applications.
|
|
No cogging or preferred rotor position
No hysteresis or eddy current losses
Extremely low current consumption
Ultra flat dimensions
Extremely light and compact
Smooth and accurate speed control
Speeds up to 60,000 rpm
High power rare earth magnets
Electronic commutation for extremely long operational lifetime
High precision gearboxes available
Control electronics available for all motor series
Custom systems available from design to production
Autoclavable and vacuum rated motors available
|
|
• Fast speed up to 50,000 rpm and up to 30W of continuous output power
• Ultra compact. At 32 mm (1.26”) diameter by 11.7 mm (0.46”) length, the nuvoDisc is over 75% shorter and over 90% lighter than typical competitor motors.
• With a weight of only 26g, applications benefit from being lightweight.
• High efficiency. Reduces power supply requirements by drawing less current,
resulting in less generated heat.
• Low vibration. High speed slotless design provides characteristic smooth operation.
*A slotted design is also available on request when detent torque is needed, for applications such as Damper Control.
|
|
|
|
Synchronous electric motors: Brushless motors
