Friction brakes

Torque: 1.3 Nm - 4,166 Nm
Rotational speed: 2,500 rpm
Power: 155 W

... need to unwind and process. The Extreme pneumatic brake is available in two models: XT10 brake is usually used for important braking torques, such as on corrugated board roll stands, ...

Torque: 1.2 Nm - 330 Nm
Rotational speed: 1,200 rpm - 3,000 rpm
Power: 700 W - 12,600 W

Combiflex pneumatic brakes, since 1974, have been representing the benchmark for the converting industry and most of all for corrugated machines. Mounted on the roll stand unwinders, they represent the best solution to ...

Torque: 0.23 Nm - 9 Nm
Rotational speed: 4,500 rpm - 10,500 rpm

... overexcitation and power reduction. The ROBA®-servostop® Cobot is a closed-circuit, electromagnetic safety brake. When the brake is applied, a rotor disc with friction lining pads is ...

Torque: 1.5 Nm - 100 Nm
Rotational speed: 3,000 rpm - 20,000 rpm

... The ROBA®-servostop® is a closed-circuit, electromagnetic safety brake. When the brake is closed, the rotor is held between the armature disk and the flange plate by the friction ...

Torque: 0.31 Nm - 11.5 Nm
Rotational speed: 4,500 rpm - 21,000 rpm

... spring-applied safety brake for servomotors ✓ Slim design ✓ High power density ✓ Low energy consumption ✓ Simple assembly Slim brake for installation both in the A-bearing side and in the B-bearing ...

Torque: 3 Nm - 40,000 Nm

• Brake torque (customizable) • Ultra-thin design for narrow space application • Steel stator with good electromagnetic performance • Type Examination Certificate for lifting machinery

Torque: 3 Nm - 250 Nm

•Proprietary chamfer design to meet the needs of wheel rotation •Applicable to various working conditions: parking or decelering •Up to IP67 protection level

Torque: 0.32 Nm - 120 Nm
Rotational speed: 3,600 rpm - 6,000 rpm
Power: 6.1 W - 32 W

REACH servo brake is a single-piece brake with two friction surfaces. When the electromagnetic coil is energized, the brake is released and the connected shaft is free ...

Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,234 N

is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, ...

Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,145 N

is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, ...

Torque: 0 ft.lb - 18,000 ft.lb
Braking force: 37,214 N

is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, ...

Torque: 1.5 Nm - 600 Nm
Rotational speed: 3,000 rpm - 6,000 rpm

... system developed by INTORQ, brakes can be assembled to fit almost any task. You benefit from the wide variety of options, fast project planning and rapid delivery. further explanation: INTORQ BFK458 Double-brake - ...

Torque: 0.24 Nm - 4 Nm
Power: 5.2 W - 12.4 W

Spring-applied brake INTORQ BFK551 Wherever there is only a very limited installation space available and a powerful brake is still required, we are sure to be “new fans”. Developed from the requirements ...

Torque: 0.27 Nm - 8 Nm
Rotational speed: 5,000, 4,000, 6,000, 3,000, 2,500 rpm
Power: 5.8 W - 27.2 W

... electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected. For ...

Torque: 14 Nm - 600 Nm

... Our pneumatic brakes can be combined with all our air motors. The combination of motor with brake is widely used for winches, cranes and positioning devices. All brakes are built ...

The Nexen Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent back driving ...

Braking force: 0 kN - 190 kN

... activated – hydraulically released Features - Code Brake Caliper - H Standard - W Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction block wear - M

Braking force: 0 kN - 270 kN

... activated – hydraulically released Features - Code Brake Caliper - H Floating caliper - S Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction ...

Braking force: 0 kN - 420 kN

... activated – hydraulically released Features - Code Brake Caliper - H Standard - W Frame size 165 - 165 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction block wear - M

LinClamp clamping and braking systems are designed to brake and retain masses moving axially over linear guide rails and elements. Their design, surface quality, and dimensional, shape, and positional ...

Torque: 4 Nm - 1,600 Nm

... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are ...

Torque: 4 Nm - 500 Nm

... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are ...

Torque: 4 Nm - 1,600 Nm

... Spring actuated and electromagnetically released · Braking torque can be reduced · Manual release facilities for all sizes · Air gap and wear monitoring (optional) THEY ARE DESIGNED FOR BRAKING ...

Torque: 0.05 Nm - 3,200 Nm

... A range of electromagnetic brakes with torque range from 0.05 to 3200 Nm / 0.4 in-lbs. to 2360 ft-lbs. Including multiple disc, mag-particle, hysteresis, spring applied and permanent magnet models. Electromagnetic brakes ...

Torque: 6.8 Nm - 59.7 Nm

Brake designed for general industrial applications. Units come standard with zero backlash armature. Units are normally produced in a high torque version but a lower torque is also available which reduces the overall ...

Torque: 5.4 Nm - 199.3 Nm

Brake is designed for general industrial use. Low inertia zero backlash armature can be bolted to your hub. Brake can be supplied with internal or external hub depending upon overall length restrictions. ...

Torque: 0.5 Nm - 0.7 Nm
Braking force: 300 N

... application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is only recommended to use the brake only as a holding brake and not as an emergency ...

Torque: 1.5, 0.5 Nm

Electronic brake for all NEMA23 motors The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake ...

Torque: 1.7, 4 Nm

... vertical linear application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not ...

Torque: 0.3 Nm - 2 Nm
Power: 6 W - 15 W

... closed-current spring-applied brakes. This brake solution is characterised by a particularly compact construction, and is designed for small loads. The type 08 can be used as a service brake ...

Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W

... current spring-applied brake, and is used in applications with tough ambient conditions around the world. The standard brake conforms to protection class IP66, with hand-release IP65. The brake ...

Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W

... current spring-applied brake. It has been manufactured by KEB for over 50 years and is used throughout the world in a wide range of applications. The brake can be used both as a service brake ...

Torque: 1 Nm

Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...

Torque: 1.5 Nm

E 100A This power-on brake is available on request.

Torque: 1.5 Nm

This power-off brake (permanent-magnet brake) is available on request. The correct polarity must be respected.

Torque: 0.06 Nm - 3.2 Nm
Rotational speed: 6,000 rpm

... extremely compact design in combination with a constant torque to the sister model BXW. This performance was achieved by new friction lining and excitation technology. - High reliability - Ultra-thin design - Low ...

Torque: 5 Nm - 320 Nm
Rotational speed: 2,000 rpm - 8,000 rpm

Due to the excellent responsiveness it is possible to realize fast switching processes. The optimal installation form can be selected from the three types of armature assemblies with different shapes. - Different armature options - ...

Torque: 5 Nm - 55 Nm
Rotational speed: 3,600, 5,000 rpm

The BXR model is an emergency and holding brake. Its main feature is the slim design, which makes it a perfect solution in confined spaces. The main applications are in robotics and in servo drives. - High reliability - ...

Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 5 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00

Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 6.6 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather

Torque: 0.1 Nm
Rotational speed: 5,000 rpm
Power: 9 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather

Braking force: 400 N - 880,000 N

... and safest braking systems to meet their specific requirements. Svendborg offers a wide range of highly engineered products including hydraulic brakes and power units, thruster brakes, ...

Braking force: 21,990, 25,920 N

An active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. The BSAB brakes are multi piston Dual-Action brakes ...

Braking force: 0 kN - 113 kN

... 75 is an active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. This brake can provide clamping force up to 140,000 N. ...

Torque: 235 Nm - 19,000 Nm

brakes are intended for safety/emergency i.e. spring actuated and hydraulically released. High environment protection grade (IP56) and robust construction make these safety/emergency brakes suitable ...

Torque: 187 Nm - 8,830 Nm
Rotational speed: 475 rpm - 2,000 rpm

The spring-loaded SL brakes are designed for all applications where a fail-safe brake is required. The brake consists of a hydraulic assembly, a plate assembly and a driven hub supplied ...

Torque: 150 Nm - 7,000 Nm
Braking force: 0 N - 0 N
Rotational speed: 150 rpm - 400 rpm

... activated? The FPC safety brake is activated when the rate of descent exceeds a preset value, generally between 30% and 50% above the rated speed of the application. This device uses centrifugal force to lock the ...

Torque: 130, 45, 260 Nm
Rotational speed: 0 rpm - 15,000 rpm
Power: 4,500, 12,000, 24,000 W

... rated speed is 1000, 1500 or 1800 rpm. In the event of motorization or motor brake failure, the EC brake is activated and controls the lowering of the load. Centrifugal brake is mounted ...

Torque: 20, 60, 120, 250 Nm
Rotational speed: 1,800, 2,000 rpm
Power: 100, 180, 350, 680 W

... FNH pneumatic brake is efficient and reliable for tension control in industrial unwinding, with heat dissipation and precise braking adjustment. It stands out for its heat dissipation capacity and ...

Torque: 7 Nm - 3,600 Nm
Rotational speed: 1,800 rpm - 4,200 rpm
Power: 7 W - 150 W

Electromagnetic multidisc type brake Tension: 24 V dc – 0% + 15% Application: in oil bath – for dry application at very low rpm only Mounting: The brake is fastened to a wall or on a ...

Torque: 20 Nm - 3,600 Nm
Power: 13 W - 150 W

Multidisc electromagnetic brake. Tension 24 V dc – 0 + 15%. Used in oil bath. The brake is fastened to a wall with the hub (8) splined to the shaft to be braked.

Torque: 100 Nm - 6,000 Nm
Power: 6 W - 162 W

Electromagnetic brake with front toothing, operation with milled flange EC/Z-F Tension 24 V dc – 0 + 15% Used for dry and oil applications. Used for dry and oil bath applications. It must be engaged ...

Torque: 300 Nm
Braking force: 2.5 kN - 30 kN

SITEMA Safety Brakespneumatic for compressive load

Safety Locks Secure restraining of lifted loads Compact and safe The design principle allows for the creation of highly compact clamping heads. They are ideal for applications involving purely static securing. Series KRG, KRGP For ...

Industrial centrifugal brakes are the perfect solution for high-performance industry sectors. They are designed for industry sectors where a reliable, robust braking system is needed, capable of withstanding ...

Torque: 6 Nm - 200 Nm
Rotational speed: 1,000, 800 rpm

... contribute to perform converting processes more reliably and efficiently upstream of the unwinder module. Our Electromagnetic Brake Tension Control guarantees seamless compatibility across the complete range of standard ...