Product IntroductionWidely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. Suitable for purification of insulating oil in transformers of 35KV-110KV-220KV. The dual-stage vacuum oil filter provides dehydration, degassing, multi-stage precision filtration to remove moisture, gases, light hydrocarbons and mechanical impurities; electric heating constant temperature automatic control ensures rapid and uniform oil heating; vacuum pumping and vacuum oil injection functions enable ultimate vacuum extraction for transformers and GIS equipment.
Working principle and processAfter oil passes the magnetic filter it enters the coarse filter heater for heating. Heated oil is pumped to the spiral spray atomization system creating a coarse fog that falls on the reaction tower and enters the vacuum separation chamber, where moisture evaporates. Oil mist and multi-dimensional evaporation inside the tank enable rapid purification. Dehydrated, degassed and cleaned oil is filtered by precision filters under the action of the oil exhaust pump. Separated water vapor is condensed in a water tank, and non-condensed gases are discharged by the vacuum pump after cooling.
Technical parametersItem | Unit | Spec
Model | | SY/ZD-RM-150
Volume of flow | L/min | 150
Volume of flow | L/H | 8000-10000 (Variable frequency adjustable)
Temperature control range | ℃ | 0~100
Working temperature | ℃ | 20~60
Extreme vacuum | pa | ≤20
Working vacuum degree | Mpa | -0.06 ~ -0.099
Gas content in oil | % | ≤0.1
Work pressure | Mpa | ≤0.5
Filtration accuracy | µm | ≤1
Water content in oil | ppm | ≤3
Oil breakdown voltage | KV | ≥65
Heating power | KW | 72
Total power | KW | 80
Power supply | | Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter | mm | 50
Continuous working hours | H | ≥800
Trouble-free working hours | H | ≥8600
Oil quality indicators after insulating oil treatmentPerformance project | Unit | Post-processing indicators | Test method
1. Moisture content | % | none | GB/T511
2. Moisture content | PPM | ≤3 | GB/T7600
3. Pressure resistance value | KV | ≥65KV | GB, DL or IEC standards
4. Residual gas | | ≤0.5 | Gas content measurement methods in accordance with relevant GB, DL or IEC standards
5. Acid value | | 1µm
Product features- High vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology efficiently remove water, dissolved micro water, free carbon and gases.
- Multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption offers large filtration area, strong pollutant holding capacity and high filtration accuracy (ß 3 ≥ 1000).
- Compound three-in-one protection device: automatic protection for high/low oil levels, infrared bubble detection, automatic liquid level control, automatic temperature control and pressure protection — high automation, sensitive and reliable operation.
- Specially suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance.
- Online oil filtration capable of unmanned operation; operating status indicated by indicator lights.
- Humanized design with low noise, simple operation, long maintenance intervals and low energy consumption.
Function of Two-Stage Vacuum Oil FilterThe machine provides high-efficiency dehydration, degassing, filtration and drying of transformer oil. Main components include: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet and robust steel frame. Surface treatment uses plastic spraying for a smooth, bright finish. The machine performs filtration, purification and regeneration to efficiently remove moisture, gas and mechanical impurities from insulating oil.
Caractéristiques / spécifications techniques- Model: SY/ZD-RM-150 (commercial model designation: UHV-344)
- Flow rate: 150 L/min (8,000–10,000 L/h, variable frequency)
- Temperature control range: 0–100 ℃; working temperature: 20–60 ℃
- Extreme vacuum: ≤20 pa; working vacuum degree: -0.06 to -0.099 Mpa
- Filtration accuracy: ≤1 µm; gas content in oil ≤0.1%; water content in oil ≤3 ppm
- Oil breakdown voltage after treatment: ≥65 KV
- Heating power: 72 KW; total power: 80 KW; power supply: Three-phase five-wire 380V 50Hz
- Inlet/outlet pipe diameter: 50 mm
- Continuous working hours ≥800 H; trouble-free working hours ≥8600 H