- Hydraulics - Pneumatics >
- Valve >
- Valve >
- ARI-Armaturen
ARI-Armaturen valves
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 15 mm - 50 mm
... without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value kv. Advantage • ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
C.Matic S.p.A.
DN: 0.125 in - 0.75 in
Temperature: -10 °C - 70 °C
Flow rate: 310 l/min - 6,300 l/min
This valve can easily vent the circuit in case of an air supply failure. If assembled on the cylinder port, it increases the cylinder speed. DATASHEET Recommended tubings: according to the fitting connected to the ...
C.Matic S.p.A.
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer when connected between the valve and the cylinder to operate. Pressure is being saved and rod speed decreased in the ...
C.Matic S.p.A.
Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ISO standard. Competitive price, with fast delivery time, most ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
Hughes Safety Showers
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball float valves ...
Hughes Safety Showers
DN: 20 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 100 °C
characteristics ports MK threads G 3/4 - G 1 1/4, FK flanges PN 16/40/100 function NC pressure range 0-16/0-40/0-64/0-100, bar Kv value m³/h 7,4 media gaseous - liquid - highly viscous -, gelatinous - contaminated flow direction ...
Müller co ax GmbH
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
DN: 6, 8 mm
The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. ...
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of gaseous fuel flow. This ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
DN: 10 mm - 50 mm
Pressure: 16 bar
Armaturen Arndt
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
Armaturen Arndt
DN: 0.5 in
Pressure: 250, 400 bar
Temperature: 120, 200 °C
manometer gauge valve, DIN 16271, male thread x sleeve x test connector M20 x 1,5
Armaturen Arndt
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C
INTEC K200 Flanged ball valve, floating ball, soft seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body soft seated floating ball FTF dimensions ...
KLINGER-SCHÖNEBERG GmbH
DN: 0.25 in - 8 in
Pressure: 45, 180 bar
Temperature: 140 °C
Ball valve - 1/4" - TF VABS 1/4 The TF-VABS ball valves have been exclusively designed and manufactured for refrigerating systems operating with all refrigerant fluids (except NH³).
DN: 125 mm - 400 mm
Pressure: 10 bar - 40 bar
Temperature: 130 °C
double-seat, straight-way valve for feeding or draining, large flow rates and nominal diameters | body made of GGG-40, GS-C25, CrNiMo-steel | incl. float rod and shell-type float made of CrNiMo-steel | rubber coating ...
MANKENBERG GmbH
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
MANKENBERG GmbH
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm body, ...
MANKENBERG GmbH
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston ...
I.L.C. srl
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
Max-Air Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining