DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...
Gascat
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
Gascat
DN: 1, 2 in
Pressure: 8 bar
The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...
Gascat
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 0.2 bar
Front control valve, inlet and outlet copper tube 10x1mm, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: EN 13792 Design: DIN ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 1 bar
Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...
Kemper Olpe GmbH
DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...
Kemper Olpe GmbH
Pressure: 40 bar
Temperature: -40 °C - 150 °C
... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...
ACMO S.p.A.
Pressure: 20, 60 bar
The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.
DN: 2 in - 12 in
Pressure: 150 psi
... SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 12 in
Pressure: 150 psi
... SIZE: 2-1/2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC electric butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2＂～8＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 50 mm - 400 mm
Pressure: 1 bar
Temperature: 80 °C
... industry standard. It was the first valve specifically designed for handling dry bulk solid materials, and is “the original” orifice gate valve. Purpose: Prior to the Orifice Gate, conventional knife ...
Vortex Global
DN: 100 mm - 350 mm
Pressure: 5 bar
Temperature: 120 °C
The HDPV2 Gate was originally developed to isolate silos in applications where high pressure aeration is used to fluidize powder discharge. Over time, the HDPV2 Gate has been redesigned and modified for greater application versatility. Ideal ...
Vortex Global
DN: 50 mm - 305 mm
Temperature: 350 °C
... Pressure Valve™ often replaces deficient slide gates and butterfly valves used in such environments. Key Features Replaceable packing gland for in-line maintenance Spring-loaded blade guides for ...
Vortex Global
DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C
Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated
MerxTrade BV
DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C
... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...
MerxTrade BV
DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C
... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1870144 Body ...
MerxTrade BV
DN: 40 mm - 300 mm
Pressure: 1.5 bar - 12 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Hawido AG
Pressure: 400 bar
SCHROEDER automatic recirculation valves (ARC) for minimum flow to protect centrifugal pumps. To ensure minimum flow through the pump during operation at low flows. Also called minimum flow valves, ...
Unitecno, SL
... rating 4500#: Choke valves. Pressure reducing and overflow control stations. Upstream/downstream constant pressure keeping. Leak-off control valves for minimum flow on boiler feedwater pumps. Cooling ...
Unitecno, SL
Pressure: 400 bar
Choke valve is a kind of control valves, mostly used in oil and gas production wells to control the flow of well fluids being produced. Choke valves allow fluid flow through a very ...
Unitecno, SL
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,000 mm
Temperature: -46 °C - 550 °C
... to corrosion protection. 5) Valve stem with bow friction coefficient of the bearing. 6) Valve seat spring is made of the X-750 INCONEL helical spring, to ensure the sealing performance of the valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,400 mm
Temperature: -46 °C - 150 °C
... barrier. 5) Low valve torque 6) Valve fire test has API, 6FA, API607 7) Blowout prevention valve stem, anti-blow out stem 8) Anti-static design G-type series full welded ...
wenzhou domos fluid equipment co.,ltd
Valve Specifications • Prevention of sticking-out of stem • Anti-static device • Design of Inner Pressure-balance hole • Full Bore • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • ...
ROPO GmbH
DN: 8 mm - 100 mm
Pressure: 1,000, 800 psi
Temperature: -20 °C - 360 °C
... Class 300 • Body: CF8/CF8M • Ball: SS316 • Stem: SS316 • Seat: PTFE/PPL Installable Accessories Solenoid Valve Limit Switch Positioner Air-Filter Regulator
ROPO GmbH
DN: 15 mm - 100 mm
... Reinforced PTFE, Usage and construction: L style three-way ball valve can be used for changing the direction of the flow, connecting the two way, T style three-way ball valve can be used for diffluence, ...
ROPO GmbH
DN: 0.5 in - 2 in
Angle Seat Valves • Available in 1/2” 3/4”, 1”, 1-1/2” 8t 2” port sizes. • 2/2 function with In-Iine installation. • Flange type also available. • Large flow rates. • Suitable for viscous and dirty media. • Suitable ...
Push-fit Hep2O includes unique features that enable quick and easy installation with a secure fitting. It is the only push-fit plumbing system with joint recognition, secure demounting and a 50 year guarantee.
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of a differential float valve. When the water reaches the upper preset level the valve closes completely ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
The A470 leakage butterfly valve can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The valve A470 offers a safe separation of products and ...
INOXPA
DN: 10 mm - 200 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
Sanitary butterfly valves, whether manually or automatically actuated, can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The butterfly valve ...
INOXPA
DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 70 °C
Throttle valve, in block shape, Anodised aluminium, Straight-way valves with restricted flow in both directions.
RIEGLER & Co.KG
... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...
DN: 50 mm - 1,200 mm
Kolk gate valves are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 1074-2 (DIN 3352-4) and EN 1171, flange drilling acc. to EN 1092-2 (ISO 7005-2). Face to face acc. to EN 558-1 (DIN 3202-1 ...
DN: 4 mm - 25 mm
Pressure: 250 bar - 300 bar
Temperature: -20 °C - 100 °C
Mounting holes Position switches Combinations Detent on request
MHA ZENTGRAF GmbH & Co. KG
DN: 4 mm - 35 mm
Pressure: 250, 500, 350, 400 bar
Temperature: -30 °C - 100 °C
Mounting holes Position switches Combinations Detent on request
MHA ZENTGRAF GmbH & Co. KG
DN: 50, 32, 40 mm
Pressure: 420 bar
Temperature: -20 °C - 100 °C
Mounting holes Position switches Combinations Detent on request
MHA ZENTGRAF GmbH & Co. KG
DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C
Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...
Pressure: 0.4 bar - 14.4 bar
Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864
DN: 0.75, 1, 0.5 in
Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, ...
Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C
RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... food and dairy industry. The design of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, ...
Gebr. Rieger GmbH + Co. KG
Please specify:
Help us improve:
remaining