- Hydraulics - Pneumatics >
- Valve >
- Valve >
- Richter
Richter valves
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
Hughes Safety Showers
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball float valves ...
Hughes Safety Showers
DN: 400 mm - 1,400 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C
... drilled according to PN EN 1092-2: – for gate valves DN 700 – 1000 are drilled on PN 10 – for gate valves DN 1200 – 1400 are drilled on PN 2,5 •wheel for hand operation can be assembled directly on ...
ZETKAMA Sp. z o.o.
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... leakproofness class – A acc. EN -12266 – 1) •compact settlement •environment-friendly •tests acc. EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection ...
ZETKAMA Sp. z o.o.
DN: 20 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 100 °C
characteristics ports MK threads G 3/4 - G 1 1/4, FK flanges PN 16/40/100 function NC pressure range 0-16/0-40/0-64/0-100, bar Kv value m³/h 7,4 media gaseous - liquid - highly viscous -, gelatinous - contaminated flow direction ...
Müller co ax GmbH
DN: 6, 8 mm
The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. ...
DN: 0.25 in - 1.5 in
DN: 0.25 in - 1.5 in
Pressure: 250 bar
Temperature: -10 °C - 80 °C
Pressure: 200 bar
Flow rate: 90 l/min - 120 l/min
The Hitch Control valves manufactured by Husco can stand alone or can be incorporated into a sectional valve stack. Its load holding leakage is less than 1 ccm at 100 bar. It is custom design to incorporate ...
Husco International
Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century.
Crane Process Flow Technologies GmbH
Krombach® Double-Offset Butterfly Valves (AK120 / AK 125) come in fabricated design till 144″ and feature a unique double offset sealing technology, with the soft sealing element on the disc, improving sealing performance, ...
Crane Process Flow Technologies GmbH
Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free ...
Crane Process Flow Technologies GmbH
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
Kühme Armaturen GmbH
DN: 50 mm - 400 mm
Pressure: 6, 25 bar
Temperature: 200 °C
2D MIXING VALVES – TYPE ZDM Fully automated mixing valve for a selective gas quality control with simultaneous control of the flow rate. The application area of the ZDM mixing valve ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of gaseous fuel flow. This ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
DN: 10 mm - 50 mm
Pressure: 16 bar
Armaturen Arndt
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
Armaturen Arndt
DN: 0.5 in
Pressure: 250, 400 bar
Temperature: 120, 200 °C
manometer gauge valve, DIN 16271, male thread x sleeve x test connector M20 x 1,5
Armaturen Arndt
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
DN: 300 mm
Pressure: 40 bar - 160 bar
... mechanical power into electrical power. For this purpose, the KLINGER Schöneberg ball valve with welding ends type INTEC K211-S-HT DN40 PN160 is used. The ball valve has been specially designed for the ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 50 mm
... ball valves with oval handwheel. Space-saving installation and increased safety against unintentional operation. For the purpose of space-saving installation and the increased safety requirements for unintentional operation ...
KLINGER-SCHÖNEBERG GmbH
DN: 4 mm - 10 mm
Pressure: 250 bar
Temperature: 0 °C - 500 °C
... ring connection RK-NEEDLE VALVES Miniplant valve for generally applications. With conventional stuffing box or bellow sealed and safety stuffing box a good solution with clamping ring connection ...
KLINGER-SCHÖNEBERG GmbH
DN: 77, 84 mm
Butterfly valve ◆ - Aluminum disk,light and solid. ◆ - Manual or pneumatic operated. ◆ - Easy installation ◆ - Easy installation.Solenoid Value,min micros witch and connecting sleeve are opional.
Sicoma Zhuhai Co., Ltd
DN: 125 mm - 400 mm
Pressure: 10 bar - 40 bar
Temperature: 130 °C
double-seat, straight-way valve for feeding or draining, large flow rates and nominal diameters | body made of GGG-40, GS-C25, CrNiMo-steel | incl. float rod and shell-type float made of CrNiMo-steel | rubber coating ...
MANKENBERG GmbH
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
MANKENBERG GmbH
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm body, ...
MANKENBERG GmbH
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston ...
I.L.C. srl
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
Max-Air Technology
DN: 10 mm - 25 mm
screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...
Ho-matic
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... different applications and products Easy maintenance without the need for special tools Sturdiness: valve bodies made from solid bar The BZAW3 is a double seal valve designed to guarantee separation ...
BARDIANI VALVOLE S.p.a.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining