SIKA flow meters
Process temperature: 180 °C
... screwing it into the measuring section furthermore it grants an exact positioning in the flow direction. This avoids unnecessary measuring faults. The new flow meters VA 550/ 570 ...
CS Instruments GmbH & Co. KG
The immersion flow meter VA 550 is the ideal flow sensor for installation into existing compressed air resp. gas lines from 3/4“ up to DN 500. Special mechanical features: - Robust ...
CS Instruments GmbH & Co. KG
Process temperature: -30 °C - 80 °C
... permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual consumers. Advantages of the VA 520 flow meter: - ...
CS Instruments GmbH & Co. KG
Volumetric flow rate: 0.8 l/h - 1,200 l/h
Process temperature: 80 °C
Process pressure: 0 bar - 4 bar
... Float-type flow meter - Connections: GL 18–6 mm - Corrosion-resistant - For wall mounting in a vertical position - Material of sample-contacting parts: glass, PTFE Corrosion-resistant, without needle ...
M&C TechGroup Germany GmbH
Process temperature: 80 °C
Process pressure: 0 Pa - 400,000 Pa
... with needle valve, for wall mounting The M&C flow meters – type FM 1 and FM 10 – which are highly corrosion-resistant are used for controlling the flow in the case of aggressive gases ...
M&C TechGroup Germany GmbH
Volumetric flow rate: 1.6 l/h - 800 l/h
Process temperature: -40 °C - 180 °C
Process pressure: 2 bar
- Float-type flow meter with needle valve in the gas inlet - With monostable, optical flow monitoring w/o evaluation electronics - Completely electrically heated up to +180 °C [+356 ...
M&C TechGroup Germany GmbH
Process temperature: 1,000 °C
Process pressure: 100 mbar
Dedicated to travers points volumetric flow rate measurement in industrial stacks compliant to European Standard EN 16911-1, to ISO 10780 and to USEPA 40CFR part 60, method 2 Professional solution with: Compatible ...
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... VPFlowScope M can be installed under pressure and measures (bi-directional) flow, pressure, temperature, and total flow simultaneously. The flow meter is an all-in-one ...
VPInstruments
Volumetric flow rate: 0 m³/h - 1,000 m³/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 Pa - 3,500,000 Pa
... consumption of machines, cost allocation, and pressure loss monitoring. It measures (bi-directional) mass flow, temperature, pressure, and total flow which is key data for point of use compressed air ...
VPInstruments
Volumetric flow rate: 2.2 l/min - 50 l/min
Process temperature: 20 °C - 32 °C
Process pressure: 0 bar - 10 bar
... Thermabridge™ technology, the VPFlowScope In-line can perform accurate flow measurements. The built-in display will show the actual and total flow, and the Modbus and analog 4 .. 20 mA outputs enable ...
VPInstruments
Volumetric flow rate: 1.5 l/min - 250 l/min
ema brand new Ultrasonic Flow Meter can be used in conductive or non-conductive liquids, so it can be widely used in most liquid without the restriction or being affected by other mixed materials in ...
Derivative of our proven Production Line Flow Meter Built-in automatic pressure control Direct correlation to harmonised standards Product specific parameters for optimum test set-up Case and combustion ...
Furness Controls
Volumetric flow rate: 0 l/min - 20,000 l/min
... FCO752 is quite possibly the most flexible, reliable, and diverse flow meter available today. Air and gas flows from 0.01 ml/min to 10,000 l/min Using Furness Controls Laminar flow ...
Furness Controls
Volumetric flow rate: 0 l/min - 10,000 l/min
Precision: 1 %
... few. The FCO732 is one of the most flexible, reliable and diverse flow meters on the market. Excellent accuracy of <±1% Reading Using the well proven Furness Controls laminar flow ...
Furness Controls
Volumetric flow rate: 3 l/h - 250 l/h
Process pressure: 10 bar
... , alkalines, acids Direct visualisation of the measured values Accuracy class 4 Integrated mounting rail for flow data sensors Advantage • Measured measuring ranges oriented to practice according ...
Process temperature: -20 °C - 80 °C
AFM-3 Flow Meter Specifications Usage:For testing liquid flow rate, Commonly used in smart toilets, drinkingfountains, etc. Parameters - AFM-3 Rated voltage - 5 VDC Rated ...
ALLDOO Micropump | Micro Diaphragm Pumps
Process temperature: 20 °C
... LED blinks when flow is measured and hence optically displays correct operation of the cooling system. These LEDs not only serve the functional purpose but additionally look great! Product Information The FlowMeter ...
ALLDOO Micropump | Micro Diaphragm Pumps
Process temperature: 120 °C
1/2 inch DN15 Transparent Water Flow Meter Flow MeterHall Flow Sensor Indicator Counter Specification: Appearance: clear product identification,accurate ...
ALLDOO Micropump | Micro Diaphragm Pumps
Process temperature: 0 °C - 50 °C
... hand-held MiniWater®20 is a: Turbine flow meter for water Hygrometer Thermometer The MiniWater®20 hand-held measuring instrument with the MC20 operating and display unit ...
Schiltknecht Messtechnik
Volumetric flow rate: 0.1 m³/h - 68 m³/h
Process temperature: 0 °C - 85 °C
Process pressure: 0 bar - 250 bar
... as the primary sensor; its rotational speed is proportional to the flow rate. The rotational speed is detected by means of a biased Hall sensors, i.e. there are no magnets in the flow space. The FLEX ...
VAL.CO srl
Volumetric flow rate: 1.4 l/min - 2,500 l/min
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 350 bar
... measurement possible with forwards and reverse flow ● For cost-sensitive applications ● Simple to use ● Cable outlet infinitely rotatable Characteristics The VHS flow transmitter measures the ...
VAL.CO srl
Volumetric flow rate: 0.2 l/h - 220 l/h
Process temperature: 0 °C - 65 °C
Process pressure: 0 bar - 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
VAL.CO srl
... cone, whereas for the Venturi nozzle, the inlet contour matches that of the ISA 1932 flow nozzle. The major advantage of the Venturi over orifice plates and flow nozzles is in the area of pressure ...
Process temperature: -35 °C - 60 °C
Precision: 1 %
Repeatibility: 0.1 %
... Low power consumption enables operation using solar cells - Recognition of flow direction - Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) - Recognition ...
SOMMER Messtechnik GmbH
Process temperature: -20 °C - 60 °C
Precision: 1 %
... TRANSMISSION IN COMPACT Housing The RQ-30 ADMS is an all-in-one discharge measurement System. It contains the non-contact flow velocity and water level sensors of the RQ- 30 and applies the same algorithms and model ...
SOMMER Messtechnik GmbH
Process temperature: -35 °C - 60 °C
Precision: 1 %
Repeatibility: 0.1 %
... depending on the flow conditions) - Analogue outputs from 4 to 20 mA (optional) Fields of application The main advantage of the RQ-30d is that the discharge can be measured more precisely, especially in rivers ...
SOMMER Messtechnik GmbH
Water flow stabilization. Iron oxide, mechanical admixture removal / H-cation exchange of sample. Sample flow display. Emergency cutoff of sample supply. Warranty 12 months Specification Analyzed ...
VZOR
Volumetric flow rate: 0.2 ft³/s - 10 ft³/s
... station. FLYGT FLOW METERS The MagFlux electromagnetic flow meters combine high accuracy, stability and low maintenance to deliver linear readings over a large range ...
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %
... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously ...
Eastern Instruments
Mass flow rate: 100 lb/h - 500,000 lb/h
Volumetric flow rate: 1.7 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow BWS meter is a gravimetric solids flow meter that will accurately measure the flow of product that continuously passes through it. Due to its simple, ...
Eastern Instruments
... duct runs (upstream or downstream). They provide flow conditioning and accurate air flow measurement, regardless of placement and duct obstructions, as they combine flow-straightening ...
Eastern Instruments
Process temperature: -20 °C - 180 °C
Process pressure: 250 bar
Precision: 0.15 %
... The flow meter consists of a sensor and a corresponding measuring transducer. They are available both in separate and in compact designs. Area of application: The key applications for the mag-flux ...
MECON
Volumetric flow rate: 0.9 m³/h - 6,627 m³/h
... ultrasonic level transmitter - Level transmitter can be used for all flume types - Displaying of flow measurement and average or total flow - Certification of measurement Applications - ...
Volumetric flow rate: 5.3 l/min - 524 l/min
Process temperature: -25 °C - 100 °C
Process pressure: 0 bar - 10 bar
... optional). Probe material: stainless steel. Working temperature range up to +100 °C. Suitable for fixed measuring of flow rate V/t [m³/h, l/min] in clean gases, briefly also in particle-laden mediums. Signal ...
Höntzsch GmbH & Co KG
The B-Alert is a flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the facility to set one low flow rate and one high flow rate alarm value. The display shows flow ...
Process temperature: -40 °C - 200 °C
Precision: 0.75 %
Repeatibility: 0.15 %
... thermal mass flow meter for air / gas mass flow rate measurement on the market today, achieving gas mass flow rate accuracy never before possible, +/- 0.75% of reading ...
Sierra Instruments
Process temperature: -40 °C - 200 °C
... built-in flow conditioning Needs only 1-diameter up and zero downstream diameters Validate in the field for easy in-situ calibration Backed by lifetime sensor warranty The QuadraTherm® 780i is the most accurate inline ...
Sierra Instruments
Process temperature: 0 °C - 50 °C
Process pressure: 3 psi - 160 psi
... Get the Mass Flow Advantage Rotameters, also known as Variable Area (VA) meters are used across nearly every industry where economical gas flow metering and flow regulation ...
Sierra Instruments
... electronic airflow monitor RHEASGARD® KLGF measures the flow velocity in m ⁄ s and converts the measurement signal to a standard signal of 0 - 10 V (relative) (flow measuring transducer). The flow ...
S+S Regeltechnik
Process temperature: 100, 60, 20 °C
Process pressure: 1,013 mbar
... Standard, which has a flow tube length of 138mm, universal standard tube length. -1200 Compact, which has a flow tube length of 93mm, is for use where space is at a premium. The 1200 Series Flowmeter ...
MPB INDUSTRIES
Volumetric flow rate: 0 m³/h - 280 m³/h
IZMAG Electromagnetic Flow Meter : "IZMAG" provides accurate measurement of all electrically conductive liquids. Unrestricted flow tube design provides no constraints on process ...
Anderson Instrument
Process pressure: 70,000 Pa - 130,000 Pa
The model 6700 is a handheld micromanometer with Bluetooth® wireless capability; it takes airflow and pressure readings with a pitot tube or the optional velocity grid. The grid is a cross shaped grid, similar to the one in the base of ...
Volumetric flow rate: 30 l/h - 1,200 l/h
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar - 750 bar
The PSF80x low-cost flow sensor, offered by COMECO, is manufactured by SWISSFLOW. The patented Swissflow technology is the basis for the highgrade liquid flow meters. The rotor housing ...
Comeco Control & Measurement
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining