- Hydraulics - Pneumatics >
- Valve >
- Valve >
- Weir
Weir valves
The “singold” Flap Shutter is used for all kinds of bulk material and solid-liquid mixtures, when the container is to be completely emptied. Examples: Container scales, container, primary and secondary vessels in mixing plants, wagons, ...
singold gerätetechnik gmbh
Pressure: 0.3 bar - 3 bar
... CHARACTERISTICS Flame failure valve by thermocouple with pilot outlet : Double beat valve or without pilot outlet : single beat valve. Gas shut off after 1 minute of flame extinguishing. Modèles ...
DN: 0.375 in
Pressure: 46 bar
Temperature: -40 °C - 120 °C
• Differential valves are mounted on refrigerating and air conditioning installation oil receivers. • They maintain permanent oil receiver overpressure versus the compressor sumps in order to ensure constant oil distribution ...
CARLY
DN: 50 mm - 600 mm
Ductile Iron Full Lug Butterfly Valves Size: 2 to 24 in. (50 to 600mm) Description: These soft-seated butterfly valves are designed for a variety of general applications in the control of water, air, ...
DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C
... which eliminates the danger of water hammering to the piping system. Series PVS100 angle seat valves are more cost effective than equivalent actuated ball valves, while providing a significantly longer ...
Indumart
DN: 200 mm
Fully welded ball valve, standard model, available in the sizes up to DN 200 (8”) full bore or to DN 300 (12”x8”) reduced bore, PN 10÷50 or ANSI 150-300, in carbon steel with floating ball in stainless steel or nickel ...
Negri Fratelli srl
DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min
... FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control valve ...
Dicsa
Single Loop control valve with pressure ranges from vacuum to 300 psig Small and compact package Standard 0-10Vdc analog monitor output, 4-20mA optional IP65 Housing Proportion-Air's most versatile pressure ...
Proportion-Air
DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C
BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve Wide ...
BUENO TECHNOLOGY
Pressure: 0.5 bar - 16 bar
... semi-automatic drain valves, fully automatic externally fitted drain valves A or B, and fully automatic internally fitted drain valves) can be mounted as an option. Manual Drain ...
Armaturen- und Autogengerätefabrik ewo Hermann Holzapfel GmbH & Co. KG
Morsello Inox's Ball Valve has been engineered with an integrated ingot, complete with a full bore and a solid ball. The valve showcases a 180-degree opening spindle that enables manual operation, a PTFE-material ...
Morsello Inox srl
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...
LOCKWOOD
DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C
Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing ...
Pipe Valve Flange Factory Landee
Pressure: 500, 700 bar
Flow rate: 60 l/min
Control valves Pressure valves Flow control valves Stop valves
... performance butterfly valves are widely used in many industries including heating, ventilating and air conditioning, power generation, hydrocarbon processing, water and waste water treatment, marine and commercial shipbuilding. Valves ...
DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, ...
ERREESSE srl
DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating ...
Evoguard GmbH
DN: 1.25 in
... maintains a secure sealing during the tapping saddles lifetime Quick and easy to install Can be delivered with different valves and pipe thread solutions
Isiflo AS
DN: 0.5 in - 4 in
- PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded
Van de Lande BV
DN: 50, 63 mm
Pressure: 10 bar - 30 bar
Temperature: -20 °C - 65 °C
... Pilot-operated Valves for Start Valves Pilot-operated Valves for air starters Main Start Valves with or without Slow-turn Control Valves ...
DN: 0.25 in
Temperature: -20 °C - 70 °C
Dependable safety valve to retain a set supply air pressure and guarantee a steady process control when a supply air is suddenly failed by accident and its pressure becomes lower than a set pressure Features - Rugged ...
DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C
FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with ...
Farbo
DN: 15, 22 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C
Fixed orifice DZR brass double regulating valveDiameters from DN015 - ½" to DN050 - 2"Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)Olive & nut kit (O/N) for European copper tubing (EN1057) on request: ● DN015, kit for ...
VIR
DN: 15 mm - 125 mm
Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, ...
THERMOMESS S.r.l.
The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining