Weir valves

Pressure: 207 bar - 700 bar
Flow rate: 3 us gal/min - 8 us gal/min

... or used remotely with hoses Compact 4-way, 3-position valve 3,000 - 4,000 psi (207 - 275 bar) return line ground dump safety valve Controlled advance and built-in hold feature Single-acting valve ...

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds and hydraulic motors requiring constant ...

... scenarios — all with no required feedback for the position of the tensioner rod. That’s because the engineers behind the Olmsted valves provided by Oilgear developed a proprietary means of achieving the majority of the ...

DN: 80 mm - 400 mm
Pressure: 0.5 bar - 16 bar

The BERMAD Model IR-450-60-R Level Control Valve with Modulating Horizontal Float is a hydraulically operated, diaphragm actuated control valve. The valve hydraulically controls reservoir ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C

RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact ...

DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C

... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket ...

DN: 25 mm

... and closes when the coil is de-energized. A vent in the valve body relieves trapped gas when the valve closes. A pop-out indicator button informs you when the valve is open or closed. The ...

DN: 8, 6, 12 mm
Pressure: 0 Pa - 35,000,000 Pa
Temperature: -30 °C - 51 °C

Single conterbalance valves with regenerative function. Flow range from 1 to 160 liters / min. Max calibration pressure 350 bar. Assembly with in-line manifold or CETOP3 flanging, in steel or aluminum material.

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),

DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C

... heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be ...

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_valve_body: ...

DN: 0.375 in

Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C

Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, ...

DN: 13 mm
Pressure: 350 bar

... body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball Valve Mild ...

K-Tron Aeropass Valve aim at transferring the material straight on to a Hopper allowing to be used in non-authorized spaces. It consists of an instant switch off material on total filling of Scale Hopper. Aeropass Valve ...

Pressure: 100 psi

Change direction of air-conveyed material The 15 Degree Switch is available in a two-way or three-way type. The full bore design permits unrestricted material flow to minimize material degradation and pressure drop to make conveying ...

DN: 30, 25, 18 mm
Pressure: 6 bar - 420 bar
Temperature: -20 °C - 90 °C

... various manifold valve plate configurations Design characteristics directional control valves available as sub plate mounted valves nominal sizes 18, 25 and 30 ...

DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C

The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems.