|
|
| Axial ventilators: square ventilators, round ventilators, miniature ventilators, ventilators 120x120mm, external rotor ventilators, accessories (resistances, protective grills, filters, connectors), etc |
|
Our wide range of axial fans includes:
- axial fans with suction inlet
- tube fans
- wall fans
- axial rooftop fans
- belt driven fans
- oven circulators
- ...
The standard models of these fans come with very short terms of delivery. We also have special models available, according to your needs. |
|
Axiciat VA
Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings.
- Short (standard) or long (optional) galvanised steel casing
- Multiblade aluminium impeller with adjustable-pitch blades (adjustable when rotor has stopped)
- Two-piece cast aluminium hub allows blade pitch to be adjusted when rotor has stopped
- Internal motor support
- Single-speed motor (three-phase, 230/400V, 50 Hz) or two-speed motor (three-phase, 400 V, 50 Hz), IP55, coupled directly to hub
- Numerous accessories
Nine models available
Available pressure up to 750 Pa
Air flow rates: 1,250 to 95,000 m³/h |
|
CHV Series
Features:
1. Compact, large airflow, and low noise
2. Bellmouth design of casing, high airflow
3. Steely bearings, suitable for continuous applications
4. Can be installed by horizontal, vertically, and obliquely directions
Casing and impeller are made by sheet steel |
|
In any situation in which air circulation improves working or production conditions,
the Nylair® brings an adaptable solution:
air cleaning and renewing,
cooling of hot environments,
acceleration of drying and evaporation,
extraction of vapours and steams.
The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h).
They of course, conform to CEE standards.
Their design allows for a direct and easy installation.
Their robust construction is ideal for arduous conditions:
anti corrosion protection
steel or thermoplastic and stainless steel impellers |
|
OPPUS® Air-Driven Reaction Fans
Rugged, cast aluminum housing and fan blade make these fans ideal for hazardous locations and demanding ventilation projects. The RF design utilizes action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan blades providing extremely efficient, high-volume, low maintenance air movers.
FEATURES (RF-20, RF-24):
- 11,000 to 16,900 cfm (18,689 to 28,713 m3/hr) at 80 psig
- Use for fresh air supply or fume exhaust
- Can be carried or rolled to job site
- Spark resistant cast aluminum housing and fan blade
- Permanently lubricated bearings
- Flanges mate with 20-inch (508mm) and 24-inch (610mm) API tank opening |
|
| The range presented in this chapter consists of axial fans (VRE), with grill (VGR) or basket grill (VPR), round (VGV) or square (VGC) rings, and threephase motor (VREt, VGRt, VPRt, VGVt, VGCt). In response to your specific needs, the air flow, power, rotational speeds (multispeed by windings or by controllers), noise level, overall dimensions and finish... of the fans can be specifically defined according to your requirements. |
|
HJB MANN
HJB 80 - HJB 120
DESCRIPTION:
Helicoidal fans
Airflow: 32.000 - 45.000 m3/h
APPLICATIONS:
- General ventilation.
- Renovation of suffy air enviroment.
- Poultry farms and greenhouses. |
|
Mounting size for AC-input: 80mm - 250mm
Mounting size for DC-input: 42mm - 119mm
Air capacity 0.18m³/min - 24m³/min
Static pressure 12Pa - 360Pa
AC-input: 200/220/230V AC or 100/110/115V AC
DC-input: 12V DC or 24V DC
Marking: CE, UL and cUL
Long-life type also available (MDE-Series). |
|
Design Complete axial fans (motor + ring-/or tubular housing with attached console + impeller + protective mesh) Used in the 200 - 600 Pa pressure range and for air volumes of 2,000 - 8,000 m3/h. Media temperatures - 40 to + 60 °C
Main applications Rail vehicle transport technology, air conditioning rail version
Special applications Cooling and ventilation, air conditioning with noise insulation
Performance range 370 - 2200 |
|
- Speed-controllable
- Integral thermal contacts
- Maintenance-free and reliable
The AW/AR fans have speed controllable external rotor motors.
AW fans have square plates for wall mounting, AR fans have
round flanges for duct mounting. Casings manufactured from
galvanised steel, painted in standard black. The fans have
aerofoil blade impellers in die-cast aluminum, painted in
standard black.
To protect the motors from overheating the fans have
integral thermal contacts with external leads for connection
to a motor protection device. |
|
Axial duct fans EZR/DZR for commercial use: durable, powerful and robust
For ventilation or air extraction of
· Showrooms
· Foreman%u2019s offices
· Workshops
· Production sites
As well as for machine extraction
High degree of protection IP55
Can be fitted in any position
Duct sleeve made of galvanised sheet-steel, with flanges on both sides
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version, for two speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
Axial wall fans EZQ / DZQ resp. EZS / DZS: for commercial use: durable, powerful and robust
For ventilation or air extraction (“E”-version only for air extraction) of
Production facilities
Commercial premises
Garages
Portacabins
Storage facilities
High degree of protection IP55 resp. IP54
Can be fitted in any position
With square wall plate (EZQ/DZQ) or wall ring (EZS/DZS)
Single phase AC version (EZQ/EZS) and three-phase AC version (DZQ/DZS)
Pole-changeable version for 2 speeds
Special versions available on request
Air flow volume up to 15,000 m³/h
|
|
The Quiet Type
The high volume/low speed operation, coupled with 1-to-2 hp motors and a Variable Frequency Drive all make for a quiet and highly-efficient fan.
No Science Friction
Our fans use an in-line helical gear reducer for almost frictionless power transmission. Smooth operation ensures less wear and tear. |
|
Brushless DC Fans and Impeller Style Blowers...
offer multi-speed aerodynamic performances for all types of high airflow applications. Our standard designs come with fully integrated electronics and are available in various input voltages including 12 and 24 VDC (13.8 and 27.6 VDC). Environmentally resistant designs are also available for those applications that may require exposure to natural elements. With airflow exceeding 1900 CFM, these products combine the long life expectations of brushless DC products with maximum cooling and air moving capability.
|
|
| One of these HVLS fans will push as much air as five high speed fans (MacroAir studies indicate 12 or more fans). Our study shows an 84% energy savings when an HVLS fan is compared with five conventional fans." |
|
Explosion-proof fans to be used in potentially explosive areas
Type-examination tested according to European Directive 94/9/EC (ATEX)
Device group II, Category 2 G
Type of protection “e”: Increased safety
For zones 1 und 2
The following types of construction are available:
Axial wall fans
EZQ-E Ex e / DZQ-E Ex e with square wall plate
EZS-E Ex e / DZS-E Ex e with steel wall ring
Single phase AC version (EZQ- resp. EZS-E Ex e) and three-phase AC version (DZQ- resp. DZS-E Ex e)
Air flow volume up to 10,400 m³/h
Semi-centrifugal duct fans ERM-E Ex e
Single phase AC version
Air flow volume up to 870 m³/h
Axial duct fans DZR-E Ex e
Three-phase AC version
Air flow volume up to 10,500 m³/h
Axial roof fans DZD-E Ex e
Three-phase AC version
Air flow volume up to 7,100 m³/h
|
|
AXIAL FANS
Our wide range of axial fans includes:
- axial fans with suction inlet
- tube fans
- wall fans
- axial rooftop fans
- belt driven fans
- oven circulators
- ...
The standard models of these fans come with very short terms of delivery. We also have special models available, according to your needs.
CENTRIFUGAL FANS
You van rely on us for the following centrifugal fans:
- standard single inlet fans
- standard high pressure fans
- synthetic fans
- double inlet fans
- rooftop fans
- special fans
- oven circulators
The standard models of these fans come with very short terms of delivery. |
|
- Frame Size: 25x25 ~ 170x170
- Bearings: sleeve & ball bearings
- Voltages: 5/12/24/48VDC or 115/230VAC
- Special: tachometer output, alarm output, resistance protection, auto start, thermal speed control |
|
| The “FPF” series fan filters are widely recognised for their thin external profile, fashionable design, snap-mounting system and high performance. All models are Nema 12 and IP54 standard rated but, on request, alternatively available in Nema 3R and IP55 and also in EMC-shielded version. |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The high-performance axial fan provides high air circulation.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
-High through-flow air volume
-Functional design
-Time-saving installation
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air.
The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating.
The plastic usedfor the hood of this filter fan series is highly weather proof and UV light resistant.
Approvals: UL File Nr. E 234324 |
|
|
|
Axial fans
