Aalborg flow meters

Paddlewheel flow meters are impeller-type insertion meters fitted directly into the pipeline to measure the flow rate of water being pumped through a system. Walchem ...

Volumetric flow rate: 0.5 l/h - 60 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 0 Pa - 400,000 Pa

Corrosion-resistant materials Easy to install Easy measuring tube replacement Limit switch optional Flow meters perform different tasks in conditioning systems for gas analysis. The typically quite ...

Volumetric flow rate: 0.3 l/h - 100 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 0 Pa - 1,000,000 Pa

... High safety standard Certain applications in fluid and gas analysis require additional safety precautions, including flow meters. Here it's particularly important to protect the clear measuring tube ...

Volumetric flow rate: 0.2 m³/h - 75 m³/h
Process pressure: 0 bar - 16 bar
Precision: 1.5 %

Medium: Compressed air Temperature range: 0 °C to 60 °C Mounting position: Arbitrary Mounting type: Line fitting Material of casing: PBT-GF20; Aluminium powder-coated Supply voltage: 18 – 30 V DC Repeating accuracy: ± 1,5 %

Volumetric flow rate: 0.4 l/min - 40 l/min
Process temperature: 0 °C - 180 °C
Process pressure: 20, 25, 8 bar

In parallel connected circuits flow changes might remain undetected as the flow of medium is distributed among the remaining channels. External flow meters Flow-5 ...

Volumetric flow rate: 0.8 l/min - 33,880 l/min
Process temperature: -29 °C - 71 °C
Process pressure: 10, 7 bar

The Tucor Ultrasonic Flow Meter Assembly (“UFM-A”) is a flow meter for the modern age of irrigation, with a design optimized for retrofit. Capable of measuring ultra-low ...

Volumetric flow rate: 0.8 l/min - 2,032.8 l/min
Precision: 2 %

... to unscheduled flow events. One featured product from our flow line, the Ultrasonic Flow Meter Master Valve Assembly (UFMV-A), is the ultimate tool for any retrofit ...

Volumetric flow rate: 20 l/min - 150 l/min
Process pressure: 25 bar
Repeatibility: 0.5 %

Volumetric flow rate: 1 l/min - 35 l/min
Process temperature: 10 °C - 50 °C
Process pressure: 80 bar

Mass flow rate: 0.2 kg/min - 2 kg/min
Process temperature: 2 °C - 50 °C
Process pressure: 400 bar

Volumetric flow rate: 5 m³/h - 108,000 m³/h
Process pressure: 100 bar

Our flagship meter: Highest accuracy and largest measuring ranges The GT400 series is the high-end result of continuous product development of ultrasonic meter technology. Already with ...

Volumetric flow rate: 100 m³/h - 25,000 m³/h
Process pressure: 100 bar

... are required. In addition to the classic mechanical roller counter and the electrical pulse outputs, the meter can optionally be equipped with an encoder for serial transmission of the meter ...

Volumetric flow rate: 100 m³/h - 25,000 m³/h
Process pressure: 100 bar

... non-aggressive gases, other gases on request Roller counter which registers the total volume and displays it at any time without power supply High measuring accuracy Horizontal or vertical gas flow Optionally ...

Volumetric flow rate: 3 l/h - 50,000 l/h
Process temperature: 0 °C - 100 °C
Process pressure: 10 bar

... media, water, alkalines, acids Direct visualisation of the measured values Accuracy class 4 Integrated mounting rail for flow data sensors

Process temperature: -10 °C - 100 °C
Process pressure: 0.2 MPa
Precision: 0.5 %

These products are designed for environmental probe with integration of temperature and humidity sensors. The air flow is calibrated in a wind-tunnel. The products are designed for acquiring the environmental data ...

Process temperature: -10 °C - 55 °C
Process pressure: 1, 1.5 MPa
Precision: 1.5 %

MF5100 series mass flow meters are designed for a large dynamic range (200:1) and high accuracy of 1.5% of reading in flow metering and control applications. With Siargo's proprietary MEMS ...

Process temperature: -20 °C - 70 °C
Process pressure: 1 MPa
Precision: 1.5 %

MF5600 series mass flow meters are designed for general purpose flow metering and control applications where a detachable meter heat is required for some distance data ...

Volumetric flow rate: 0 m³/h - 140 m³/h
Process pressure: 16 bar

... rotating coupling • For horizontal or vertical installation • Robust water flow meter • Accurate meter measurements • Nominal diameter: DN 80 • Measuring error limit ±2 % ...

Process temperature: 0 °C - 50 °C
Process pressure: 16 bar

... measuring principle) • Robust water flow meter • Accurate meter measurements • Horizontal and vertical installation • Nominal diameter DN 40 • Protection class IP68 • SVGW ...

Process temperature: 0 °C - 50 °C
Process pressure: 16 bar

... principle) • Robust water flow meter • Accurate meter measurements Horizontal and vertical installation • Protection class IP68 • SVGW Certification • Stainless steel Storz ...

Volumetric flow rate: 0.9 m³/h - 9,048 m³/h
Process temperature: -10 °C - 85 °C
Precision: 0.5, 0.2 %

... able to process signals from fluids with flow rates of up to 10m / s in both directions (bidirectional meter). Reverse Flow - Allows measure and totalization of reverse flow Output ...

Volumetric flow rate: 0.1 m³/h - 18,000 m³/h
Process temperature: -40 °C - 100 °C
Precision: 0.5 %

Flow measurement for conductive liquids Measurement range DN10 ÷ 800 GPRS data transmission Battery powered, 6 years autonomy; 12÷24Vdc Analog, impulsive and MODBUS RTU outputs Parameter programming via ...

Volumetric flow rate: 1 m³/h - 9,048 m³/h
Process temperature: -40 °C - 85 °C
Precision: 0.5 %

... LEKTRA presents a new type of electromagnetic flowmeter with plastic sensors: RKmag. Because of its particular inner shape the mounting of the unit requires no straight pipe lengths before and after the meter. ...

Process pressure: 3.5 bar

Provides high reading accuracy of the operating pressure indicated on the internal scale (3.5 bar). The inner ball is easily visible and immediate reading is provided thanks to the presence of the two-colour silk-screen column (black ...

Volumetric flow rate: 0.1 l/min - 20 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 20, 15 bar

The PFA Clamp flowmeter is designed to perform an easy and fast exchange of the wetted parts. Key characteristics: Infrared (IR) turbine rotor reflection results in accurate and repeatable flow ...

Volumetric flow rate: 0.1 l/min - 20 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 20, 15 bar

The PFA Click Housing flowmeter is an easy to install, and affordable model to exchange the wetted parts. Key characteristics: Infrared (IR) turbine rotor reflection results in accurate and repeatable flow ...

Volumetric flow rate: 0.1 l/min - 40 l/min
Process temperature: -20 °C - 80 °C
Process pressure: 20, 15, 10 bar

The PFA Clip Mounting flowmeter is an easy to install, and affordable model to exchange the wetted parts. Key characteristics: Infrared (IR) turbine rotor reflection results in accurate and repeatable flow ...

Volumetric flow rate: 1 l/min - 35 l/min
Process temperature: 50 °C
Process pressure: 0 bar - 100 bar

• The oval gear meter with electronic counter has been designed to measure motor oils (S.A.E. 5-50), gear oils (S.A.E. 80-240), transmission fluid, coolents (ethylene glycol), brake fluids and wiper fluids. ...

... quantities. As a result, the counter can be operated with pulse output in both flow directions, which is not possible by means of the display. The parameters of the display would sometime remain at zero ...

... can select his desired flow rate by means of a clearly structured and easy to use keypad. He can start the filling process immediately by a further keystroke and interrupt it any time. To ensures best dosing accuracy, ...

Volumetric flow rate: 5 m³/h - 2,400 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 0 bar - 200 bar

... is very suitable for opaque, corrosive or dangerous fluids used in most industrial processes. Its robust design enables the flow of viscous fluids or gases to be measured under particularly severe operating conditions. Indication ...

Volumetric flow rate: 0.1 m³/h - 250 m³/h
Process temperature: 60, 200, 150, 90 °C
Process pressure: 1.5 bar - 34.5 bar

... increases gradually. For a given flow rate, the float is established at a particular level where its weight is balanced with the pressure of the fluid. The upper flange of the float indicates the value of this flow ...

Volumetric flow rate: 0.2 m³/h - 200 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 6 bar - 16 bar

... For a given flow rate, the float is established at a particular level where its weight is balanced with the pressure of the fluid. The upper flange of the float indicates the value of this level on the graduated scale. Use The ...

Process temperature: 0 °C - 250 °C
Precision: 2 %

The DOPPLER flowmeters are designed to measure the volumetric flow in closed and full pipes. It consists of two sensors an emitter and an ultrasonic receiver. The emitted waves are transmitted by the ...

Process temperature: -10 °C - 80 °C
Precision: 1 %
Repeatibility: 0.2 %

Non-intrusive flowmeter for transit time for measurement of clean liquids. Electroinica mural with power to 220 Vac or 10/30 Vdc. Available with three types of sensors A (for pipes of 20 to 100 m), B (for pipes of 60 ...

Process temperature: 50 °C

High performance fixed installation Area Velocity flowmeter with extended features for open channel, part-filled pipe and river application. Dimensions: 166x161 x103 mm; Wall mounting ABS enclosure; Protection class: ...

Volumetric flow rate: 260 us gal/min - 52,000 us gal/min
Process pressure: 0 bar - 27.58 bar

... insertion flow meter that is intended to be retrofitted into an automatic control valve. It provides an accurate flow measurement data without installing a separate meter. ...

Process temperature: -40 °C - 70 °C

MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas ...

Process temperature: 150 °C

MULTIPHASE FLOW METERING Flowatch HS The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas ...

Process temperature: 150 °C

... water and gas flow rates in Wetgas flow regimes (Lockhart-Martinelli < 0.3) without any separation or moving parts. It implements the latest state of the art technologies such as the Flow ...

Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar

... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning ...

Process temperature: 120 °C

... signal is transmitted, once in the direction of flow and once against the direction of flow. The signal is accelerated in the direction of the volume flow and delayed against the direction ...

... series gas turbine flow meter is equipped with mechanical counter it’s a kind of meter don’t run slowly with high flow measurement accuracystrong anti-magnetic ...

Volumetric flow rate: 0.1, 0.2, 1 l/s
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar

The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section ...

Volumetric flow rate: 0 l/min - 60 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar

Flowmax 42i is a flow meter calculating the volume flow of liquids. Based on the ultrasonic technology Flowmax 42i is able to measure conductive and non-conductive liquids contactfree. ...

Volumetric flow rate: 0.3 l/min - 240 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 10, 16, 15, 20, 25 bar

Flowmax 44i is a flow meter calculating the volume flow of liquids. MIB GmbH - Ultrasonic Flowmeter Flowmax 44iBased on the ultrasonic technology Flowmax 44i is able ...

... which can be freely installed and removed from the mainboard in seconds. Build your own flowmeter We offer you the possibility to customize to get the flowmeter according to your needs and your application. Plug ...

The MAGB1 is a battery-powered electromagnetic flowmeter that is certified according to the Measuring Instruments Directive (MID) and the International Organization of Legal Metrology (OIML). MAGB1 can be equipped by ...

... stand-alone version flowmeter, which does not need a transmitter and can be operated on its own. If you need a low-cost flowmeter without a read-out on a display and outputs, this will be the right one. Contact our ...

Process temperature: 0 °C - 50 °C
Process pressure: 3 psi - 160 psi

... Get the Mass Flow Advantage Rotameters, also known as Variable Area (VA) meters are used across nearly every industry where economical gas flow metering and flow regulation ...

Process temperature: 0 °C - 50 °C
Process pressure: 3 psi - 160 psi

... offerings. The RedySmart thermal mass flow meters & controllers are MEMS-based (Micro-Electro Mechanical System) technology to complement our SmartTrak® capillary-based mass flow meters ...

Process temperature: 0 °C - 50 °C
Process pressure: 0 psi - 145 psi
Precision: 1 %

... to deliver smooth, stable, accurate, and repeatable gas mass flow control you can rely on, every time. Unaffected by upstream gas temperature and pressure fluctuations, gas mass flow ...