Energy meter power meter T203PM100-MU

apparent poweranalogdigital

The T203PM100-MU is a single-phase AC/DC TRMS network analyzer equipped with a ModBUS interface, offering both analog and digital outputs. It supports current measurement ranges up to 100 A and voltage up to 290 Vac and 1000 Vdc. This device allows direct measurement of current and energy without the need for external CTs. It measures voltage, AC/DC current, active/reactive/apparent power, power factor, frequency, and harmonic distortion (THD), transmitting data via analog or digital outputs. The T203PM series can analyze up to the 21st harmonic and includes a digital contact for alarms or counters. Configuration is facilitated through the EASY SETUP 2 software and a Micro USB port. These power meters are robust, with an operating temperature range of -25 to +65°C, insulation up to 3 kVac, and safety class CAT. III 600V (bare conductor) and 1kV (insulated conductor). They can be mounted on a 35mm DIN rail, wall-mounted, or suspended with cable ties. Integration into Ethernet networks is seamless with Z-KEY/R-KEY gateways. Technical Specifications: - Power supply: 11 - 28 Vdc - Max absorption: < 70 mA @ 24 Vdc - Isolation: 3 kVac - Status indicators: Power supply, USB communication, digital output - Installation category: CAT. III 600V (bare), CAT. III 1kV (insulated) - Protection class: IP20 - Mounting: DIN rail, wall, or cable tie - Connections: 6-way removable screw terminals - Micro USB: For programming - Operating temperature: -25 to +65°C - Dimensions: 95 x 75 x 35 mm - Weight: 150 g - Case: PA6, black Measured Parameters: - Instantaneous values: Voltage, AC/DC Current, Power, Power Factor, Frequency, THD - Harmonics: Up to 21st - Precision class: 0.5% f.s. @ 50/60 Hz Communication: - Serial interface: RS485 - Protocol: ModBUS RTU - Distance: Up to 1,200 m - Connectivity: Max 32 nodes Metering Inputs: - Voltage/Current: Up to 100 A or 290 Vac; 1000 Vdc - Overload: 3 x IN continuous Built-in I/O: - Channels: 1DO, 1AO - Digital output: ACTIVE 0 - Vdc - Analog output: 0..10 Vdc Programming: EASY SETUP 2 Certifications: CE Standards: EN61000-6-4, EN61000-6-2, EN61010-1