Single-axis tilt sensor WTS6X

RS-485Modbuscapacitive

Product Introduction
The WTS6X single-axis tilt sensor by Ruicom Technology is an interference-resistant inclinometer integrating a capacitive MEMS sensing unit and a next-generation hardware platform. It provides stable tilt measurement across a wide temperature range, strong vibration and shock tolerance, and a long design service life up to 10 years. The sensor measures gravity components using a non-contact principle and calculates the real-time tilt angle without rotating shafts or mechanical linkages, enabling simple surface mounting on equipment.

Key Features

• Integrated capacitive MEMS sensing unit
• Interference-resistant hardware platform
• Non-contact, gravity-based measurement principle
• Wide operating temperature range and high vibration resistance
• Surface mounting; no rotating shafts or mechanical linkages
• Long-term reliability — design service life up to 10 years

Performance Parameters
Measurement range (single axis): 0–360°
Resolution: 0.1°
Accuracy (25°C): ±0.2°
Temperature drift (−40 to +85°C): ±0.003 °/°C
Response time (no filtering): 0.1 s
Operating temperature: −40°C to +85°C
Output interface: RS485 (MODBUS Protocol)
Output load: >500Ω
Operating duration: 50,000 hours/cycle (failure-free)
Insulation resistance: >100 MΩ
Vibration resistance: 10 grms, 10–1000 Hz
Shock resistance: 100 g @ 11 ms, three-axis (half-sine)
Weight: ≤200 g

Specifications

• Model: WTS6X
• Measurement range: 0–360° (single axis)
• Resolution: 0.1°
• Accuracy: ±0.2° (at 25°C)
• Temperature drift: ±0.003 °/°C (operating −40 to +85°C)
• Response time: 0.1 s (no filtering)
• Operating temperature: −40°C to +85°C
• Operating voltage: DC 9–36V
• Output interface: RS485 (MODBUS Protocol)
• Output load: >500Ω
• Operating duration: 50,000 hours/cycle (failure-free)
• Insulation resistance: >100 MΩ
• Vibration resistance: 10 grms, 10–1000 Hz
• Shock resistance: 100 g @ 11 ms, three-axis (half-sine)
• Weight: ≤200 g