- Hydraulics - Pneumatics >
- Valve >
- Valve >
- BURKERT
BURKERT valves
- Regulating valve, Elbow regulating valve - Fine regulating valve, Elbow fine regulating valve - Taper seat non-return valve - Needle valve - ...
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...
DN: 8 mm - 80 mm
Pressure: 64 bar
Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.
Schwer Fittings
DN: 0.25 in - 2 in
Pressure: 64 bar
Housing and ball made of 1.4408. Sealing material: PTFE / FKM.
Schwer Fittings
DN: 8 mm - 50 mm
Pressure: 64 bar
A-4BVG 90 ° switching, with flange for actuators to DIN / ISO 5211, with parallel BSP thread to DIN / ISO 228 Housing and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height of centre axis ...
Schwer Fittings
DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C
... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...
DN: 0.25 in
Pressure: 5,000 psi
Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits ...
DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min
Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic circuit: the valve is open from ...
DN: 0.25 in
Pressure: 5,000 psi
High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off of fluids under ...
Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.
DN: 0.125 in - 1.25 in
... Ross E104 is an array of valves that can handle heavy-duty applications. Their frameworks are constructed with heavy cast aluminum offered in 2/2, 3/2, 4/2, or 4/3 configurations with port sizes from G 1/8 up to G 1-1/4. ...
ROSS EUROPA
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other media. It is a ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: max 80.0 mm
SCHÜTZ CLEANCERT is the new packaging standard for applications where safety and technical cleanliness is crucial. Advantages: CLEANCERT is the highest level of process and product cleanliness and safety offered by SCHÜTZ Extensive ...
DN: 0.25, 0.125, 1.5 in
Pressure: 0 bar - 7 bar
... of sampling valves are specially designed for use in beverage manufacturing. With a MicropreSure feature, users may sample and filter water or other products mid-stream. Users may also sample into graduated cylinders ...
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
Kieselmann GmbH
DN: 50 mm - 125 mm
Pressure: 4 bar - 16 bar
... optionally in colours of your choice) ► Construction easy to maintain ► Cost-efficient leakage protection (Leakage butterfly valves) ► Automation option ► Three actuators with compatible connections PDA 75 / ...
Kieselmann GmbH
DN: 25 mm - 150 mm
KIESELMANN single seat valves are used for the universal shut-off of branched pipelines. Due to the combination of several valves, a leakage-proof process management is possible.
Kieselmann GmbH
Special valve that lets the first delivered compressed air escape so that the compressor will start more easily. Is mounted on the non-return valve.
AIRPRESS
Temperature: 330, 180, 265 °C
... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and ...
ASDevices
Temperature: 180, 260 °C
The most reliable and durable valve Our patented compact Purged Lip Sealing Valve (PLSV) is a disruptive analytical valve that offers the best of both worlds: a longer lifetime than ...
ASDevices
... Our Purged Pulse Diaphragm Valve (PPDV) changed all that. Using the static purge principle to purge the valve’s inner volume through the actuation gas, it works for applications that require the features ...
ASDevices
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...
Zaklady Automatyki POLNA S.A.
Pressure: 530, 630 bar
... DUPLEX) material are used in this valve. Due to the occurrence of working pressures of 530 bar, the valves were manufactured for nominal pressure PN630 in accordance with BN-91 1771-20/40. The seal ...
Zaklady Automatyki POLNA S.A.
DN: 300 mm
Pressure: 100 bar
2-directional valves are applied in gas engineering in case of a change in fluid flow direction in the installation. Basic design comprises passage cage valve DN300, PN100, Kv1350. The plug design ...
Zaklady Automatyki POLNA S.A.
... also offers a range of tools for tank and kegs like high quality spunding valves with 2.5 bar gauge which allow to maintain a set pressure in the vessel from 0 to 2.5 bar, or valves groups for kegs filling ...
Flow rate: 55 l/min - 600 l/min
The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...
RUPTURE VALVE TYPE B – TYPE G – TYPE R; OVERFLOW VALVES TYPE G – TYPE R IN COMPLIANCE WITH THE STANDARD 2014/33/UE The rupture valves type 3006 interrupt the downward travel of the ...
DN: 25 mm
Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 sphere valve. Made of chromed brass. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
DN: 25 mm
25 ball valve made of chromed brass. Opening by butterfly. Thread of 1 “female-female or male-female.
Nuevas líneas de extincion
... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not ...
STURDY MACHINE
They are simple water intake valves that transmit water to the land in agricultural pressurized irrigation systems. The user can irrigate by connecting the irrigation pipe directly to the outlets of the receiver valve. ...
STURDY MACHINE
When water is supplied to the pump outlets and pipelines, air accumulations in the system, especially in the pump outlets, narrow the water passage area and cause a decrease in capacity. Double sphere suction cups are used to avoid this ...
STURDY MACHINE
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, improve safety ...
CELEROS
DN: 2 in - 36 in
... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...
CELEROS
DN: 3 in - 24 in
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
CELEROS
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...
Hydrabase
DN: 0.875 in
Pressure: 0 bar - 250 bar
Temperature: -54 °C - 204 °C
... orifice, flow restrictor hydraulic valve. The NV10-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of valve. ...
Hydrabase
DN: 0.875 in
Pressure: 350 bar
Temperature: -54 °C - 204 °C
... orifice, flow restrictor hydraulic valve. The NV18-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of valve. ...
Hydrabase
DN: 0.5 in
Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...
... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...
Ralston
Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated
Ralston
Pressure: 200, 350 bar
Temperature: -18 °C - 105 °C
... process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system. * Use whenever ...
Ralston
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...
Gascat
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
Gascat
DN: 1, 2 in
Pressure: 8 bar
The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...
Gascat
DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C
Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 0.2 bar
Front control valve, inlet and outlet copper tube 10x1mm, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: EN 13792 Design: DIN ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 1 bar
Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
Pressure: 40 bar
Temperature: -40 °C - 150 °C
... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...
ABV
DN: 0.25 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
Full bore · AISI-316 · BSPP · BUTT WELD · SOCKET WELD ISO-5211 mounting pad to mount directly actuarors Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
DN: 0.375 in - 4 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP · NPT · BW · SW ISO-5211 mounting pad to mount directly actuators Characteristics • General industry application, •Blow-out proof stem design. •100% tested with air and water (Open/Close). •Anti-static ...
ABV
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining