DF ELECTRIC transformers

Primary voltage: 240, 120 V
Secondary voltage: 18 V - 24 V

... Class 2 Signaling Transformers are easy to install, low voltage power sources for residential, commercial, and industrial uses. Mounts in a standard 1/2" (13mm) knockout or surface mounts using the provided foot mounts. ...

Primary current: 5 A - 450 A

Current transformer with built-in transducers ø 35mm Primary current field-selectable 9 programmable ranges Output 0..,20mA - 4..,20mA - 0...10V d.c. 4-wire technology, a.c. auxiliary supply

Primary voltage: 10, 20, 35 kV

Overview SC (B) 10/11 epoxy cast dry-type transformer is a dry-type transformer with strong mechanical strength, electrical strength, and good heat-resistance performance. It is made of F class epoxy ...

Electric power: 0.024 kVA
Primary voltage: 230 V
Secondary voltage: 24 V

The CA1A is an economical transformer which reliably delivers either 12Vac or 24Vac and benefits from short circuit protection. Ideal for running a simple keypad and electric strike, this transformer ...

... II is implemented, a power transformer with reinforced insulation can be used for energy storage in accordance with DIN EN 61 558-2-16. If no secure insulation is required, a cost-effective design for the power transformer ...

Output power kVA: 0.06 kVA
Primary voltage: 230 V
Secondary current: 0 A - 12 A

Transformer with 230V primary Secondary 0-12V AC/60 VA for intermittent use. The transformer is fitted with PTC internal protection. Dimensions: 71.7 x 90 x 62 mm (4 DIN modules).

The head type IOSK oil paper insulated current transformers follows the current IEC and IEEE/ANSI standards. It is outstanding in controlling insulation stress using fine graded bushing. The advantages of using fine graded ...

Split-Core Current Transformers Split-Core Current Transformers (CTs) are designed for applications where it is difficult or uneconomical to open the primary conductor to install a solid-core-type current ...

Primary current: 30 A

Current transformers for energy meters single phase and three phase metering in Residential Metering applications. KEY FEATURES •High Linearity •Low cost •PCB Mountable •High Over current withstand capability RELATED ...

Electric power: 30,000 kVA - 1,000,000 kVA

The generator step up transformer, manufactured by Avantha, is suitable for producing distribution transformer that ranges from 30 mVA up to 1000 mVa ranges with a maximum 765 KV for both voltage sides ...

Primary voltage: 1.3 V
Secondary voltage: 1.3 V
Primary current: 50, 1 A

Applications „ Balanced systems: network analyzers, automatic power factor correction systems (PFCs) Features „ Connection terminal with cover (IP20) for universal connection, no fork needed „ Bus bar or din rail mounting, included complete ...

Electric power: 2,500 kVA - 1,200,000 kVA
Primary voltage: 345 kV

Recognized as one of the largest manufacturers of power transformers in the United States, SPX Waukesha designs, manufactures and tests its transformers at the companys modern operating facilities in ...

Electric power: 0.01 kVA - 31.5 kVA

The TR 21 CONTROL Transformers is a control and safety or seclude single-phase transformers. This device employs the principle of mutual induction to proselytize variations of current in a primary circuit ...

Electric power: 30,000 W
Primary voltage: 60 V - 700 V
Primary current: 500 A

DC/DC TRANSFORMER INTELLIGENT DC/DC As the key elements of hydrogen fuel cell engine, DC/DC realizes the voltage decoupling between fuel cell and vehicle high voltage bus, mainly used for output power control of hydrogen ...

Electric power: 25 W - 5,000 W
Primary voltage: 0 kV - 36 kV
Secondary voltage: 420 V

The Transformers immersed in liquid dielectric are suitable for use in interior or exterior installations for Medium Voltage networks of up to 36 kV.

Primary voltage: 50 V - 300 V
Secondary voltage: 5 V

Ebony Series Measuring and Protection The range of Crompton Instruments Ebony current transformers offers wide system current ratings, apertures, busbar and case sizes to suit every application. Manufactured to meet ...

Electric power: 3,060, 2,570, 490 kVA
Primary voltage: 25,000 V
Secondary voltage: 2,570 V

EMU Type ATM9 Main Transformer Type：ATM9 Usage: Type CRH2 EMU with speed of 200KM/h and above Main technical features Mode: Single-phase， shell-type， non-pressure sealed type; Mode of rectification: Input ...

Primary voltage: 0 V - 72,500 V
Secondary voltage: 0 V - 350,000 V

Main advantages Performance and overload Design studied to optimize any installation requirement. Silence High efficiency materials and geometry to reduce noise emission in quiet areas. Eco+POWER Expressly studied to satisfy ...

Classification: Amorphous alloy phase-shifting rectifier transform

Output power kVA: 0.03 kVA - 2.5 kVA
Primary voltage: 230 V - 400 V
Secondary voltage: 24 V - 230 V

... SINGLE PHASE ISOLATING TRANSFORMERS IP00 Modern and economical make of general purpose isolating and/or safety transformers for building into installations and industrial or power engineering devices. ...

Electric power: 7.5 kVA - 440 kVA
Primary voltage: 460 V - 575 V
Secondary voltage: 133 V - 460 V

... SCR (Silicon Control Rectifier) variable speed motor drive applications, a transformer is needed to magnetically isolate the incoming line from the motor drive. The transformer must also provide a voltage ...

Economical Low leakage inductance and interwinding capacitance Fast rise time: 3nSec typical Low profile 16-pin DIP (14-pin available) Surface mount design available Choice of turns ratio, 1:1 or 2:1

Electric power: 0.0004, 0.0005 kVA
Primary voltage: 230 V
Secondary voltage: 6 V - 24 V

Its small size makes BV 20 an ideal solution for appliance manufacturers demanding the smallest size possible, yet fulfilling the highest demands on quality and capacity. high capacity from 0.35 to 0.5 VA secondary voltage 6 V to ...

Frequency: 50 Hz - 10,000 Hz

TEGAM’s ST transformers are designed to meet the requirements of a wide variety of bridge circuitry, isolation and calibration applications. The ST units can be used to provide a balanced output from an unbalanced source. ...

Electric power: 2 W - 8 W

Nippon Ceramic is supplying transformer, coil and HV power unit satisfying customer's individual requirements based on wide range of ferrite and other types of cores technology. Design and production are complying with ...